Loading...
> >

12+ Days of Christmas PAs Givaway Discussion thread. {DAY 19}

1…567810

Comments

  • cecilia.robinsoncecilia.robinson Posts: 2,208
    edited December 1969

    THEY WORK NOW, GO GET THEM!!!

    Shinies... Thank you all Christmas PAs.

  • SpottedKittySpottedKitty Posts: 7,232
    edited December 1969

    Now, how did I manage to miss a couple? Got the wall and glass shaders in my cart now, anyway.

    Many thanks for the Christmas pressies, they're all excellent. :cheese:

  • IvyIvy Posts: 7,165
    edited December 1969

    Ikyoto said:
    OK, NOW I DARE YAH! One image using ALL of the goodies.


    Dare Fore filled ..lol
    Thanks for fixing the freebies
    I can't show everything in my shopping cart it would take about clips cuts..lol
    but lets say there goes the rest of my Christmas bonus lol
    Happy Holidays :)

    01.jpg
    1296 x 1130 - 190K
  • ddstargazer_8f4293ba59ddstargazer_8f4293ba59 Posts: 11
    edited December 1969

    riftwitch said:
    AtticAnne said:
    Now I think they are all loaded. Earlier it only showed 3 for me.

    eta: Just looked in my cart and, yes, they are showing prices.

    They aren't all showing; K4 UV’s for G2M & G2F by Slosh isn't on the page. That's the only one I missed. According to this page: http://www.daz3d.com/forums/discussion/49616/ it was the Day 1 freebie.

    I was hoping the K4 UV's would be on the catch up.

  • Jeanne MJeanne M Posts: 652
    edited December 1969

    Thank you PA's for the great freebies!
    Merry Christmas to you and to everyone here.

    Love, Jeanne :)

  • sdorseysdorsey Posts: 88
    edited December 1969

    Thank you to all the PA's for the wonderful gifts!
    Happy Holidays!

  • IkyotoIkyoto Posts: 1,159
    edited December 1969

    The Artemesia Gown for Genesis 2 Female(s)

    Lumina Hair MATs

    Angel of Retribution for Genesis 2 Female(s)

    DG IBL Light

    Ski Free for the XBikini

    Shape Presets for Genesis 2 Male(s)

    Simple Living - Fireplace

    Bryce 7.1 Pro - Gemstones One the Cable Stock Set

    Tanky

    C-Elegance Jewelry

    Ornamental Walls & Ceilings

    Glassy World

    Artificial Christmas Tree n' Poses

    Freaky Horns for Minotaur 6 Horns

    Morphing Rocks And FormationsPaper Dress for Genesis 2 Female(s)

    DA Festive Tree

    Leisure Pants for Genesis 2 Male(s)SY Christmas Lights

    Drop Jewelry

    FWSA Stacia for Victoria 6

    Make It FUZZY!!!

    Dial-an-Elf

    Drakkar Crew Action

    Fan and Reticule Set

    Clogs for Genesis 2 Female(s)

    Indoor Shoes for Genesis 2 Female(s)

  • riftwitchriftwitch Posts: 1,409
    edited December 1969

    Ikyoto said:
    The Artemesia Gown for Genesis 2 Female(s)

    Lumina Hair MATs

    Angel of Retribution for Genesis 2 Female(s)

    DG IBL Light

    Ski Free for the XBikini

    Shape Presets for Genesis 2 Male(s)

    Simple Living - Fireplace

    Bryce 7.1 Pro - Gemstones One the Cable Stock Set

    Tanky

    C-Elegance Jewelry

    Ornamental Walls & Ceilings

    Glassy World

    Artificial Christmas Tree n' Poses

    Freaky Horns for Minotaur 6 Horns

    Morphing Rocks And FormationsPaper Dress for Genesis 2 Female(s)

    DA Festive Tree

    Leisure Pants for Genesis 2 Male(s)SY Christmas Lights

    Drop Jewelry

    FWSA Stacia for Victoria 6

    Make It FUZZY!!!

    Dial-an-Elf

    Drakkar Crew Action

    Fan and Reticule Set

    Clogs for Genesis 2 Female(s)

    Indoor Shoes for Genesis 2 Female(s)

    Nice. We're only missing the K5 UVs for G2 from day 1 now.

  • dylazunadylazuna Posts: 19
    edited December 1969

    Great selection of Freebies. Thanks everyone.

    Shame the K4 UVs don't seem to be going up on the catch up. I missed the first day :(

  • DaWaterRatDaWaterRat Posts: 2,885
    edited December 1969

    I want to thank all the vendors for their generosity this year. I picked up some very fun, and in many cases, very useful, items, and I look forward to using them. :)

    Thanks again, to all the vendors who participated!

  • JOdelJOdel Posts: 6,288
    edited December 1969

    Yes. Thank all of you. The collection this year was memorable and wonderfully creative. Beautiful (and sometimes hilarious) stuff.

    Thank you all again.

  • Alisa Uh-LisaAlisa Uh-Lisa Posts: 1,308
    edited December 1969

    Thanks to all the vendors for the lovely gifts :)

  • SloshSlosh Posts: 2,391
    edited December 1969

    Ebajoy said:
    riftwitch said:
    AtticAnne said:
    Now I think they are all loaded. Earlier it only showed 3 for me.

    eta: Just looked in my cart and, yes, they are showing prices.

    They aren't all showing; K4 UV’s for G2M & G2F by Slosh isn't on the page. That's the only one I missed. According to this page: http://www.daz3d.com/forums/discussion/49616/ it was the Day 1 freebie.

    I sure hope they fix the glitch and include the K4 UVs as I have been kicking myself for missing that one as I didn't catch the freebie offer until a couple days in and it was already gone.

    Just to let everyone know... I had no idea the K4 UVs would not be in the list, and I'm sure it wasn't intentional. When DAZ gets back in the offices, I will ask them to put them out for a day since they got missed for some reason.

  • PendraiaPendraia Posts: 3,598
    edited December 1969

    Slosh said:
    Ebajoy said:
    riftwitch said:
    AtticAnne said:
    Now I think they are all loaded. Earlier it only showed 3 for me.

    eta: Just looked in my cart and, yes, they are showing prices.

    They aren't all showing; K4 UV’s for G2M & G2F by Slosh isn't on the page. That's the only one I missed. According to this page: http://www.daz3d.com/forums/discussion/49616/ it was the Day 1 freebie.

    I sure hope they fix the glitch and include the K4 UVs as I have been kicking myself for missing that one as I didn't catch the freebie offer until a couple days in and it was already gone.

    Just to let everyone know... I had no idea the K4 UVs would not be in the list, and I'm sure it wasn't intentional. When DAZ gets back in the offices, I will ask them to put them out for a day since they got missed for some reason.

    thanks Slosh...you don't know of any tutorials showing how to make alternate uv's do you? It's just I'm looking to learn how and can't find anything anywhere.

  • SloshSlosh Posts: 2,391
    edited December 1969

    I don't know of any tutorials specific to making alternate uvs. I had to wing it the first time, then each successive product, I built on the previous experience. Depending on the uv editor you are using, I know there are YouTube videos that demonstrate techniques, but none of them are showing how to start with UV "X" and end up with UV "Y"

    I personally use UVLayout by Headus. my first set, M4 for Genesis 2 Male, was done in Maya. No matter which program, though, it all comes down to moving point by point to match the uv you are converting to.

  • cecilia.robinsoncecilia.robinson Posts: 2,208
    edited December 1969

    Slosh said:
    I don't know of any tutorials specific to making alternate uvs. I had to wing it the first time, then each successive product, I built on the previous experience. Depending on the uv editor you are using, I know there are YouTube videos that demonstrate techniques, but none of them are showing how to start with UV "X" and end up with UV "Y"

    I personally use UVLayout by Headus. my first set, M4 for Genesis 2 Male, was done in Maya. No matter which program, though, it all comes down to moving point by point to match the uv you are converting to.

    Slosh, start a thread on this, it sounds very informative.

  • SloshSlosh Posts: 2,391
    edited December 1969

    cecilia.robinson said:
    Slosh said:
    I don't know of any tutorials specific to making alternate uvs. I had to wing it the first time, then each successive product, I built on the previous experience. Depending on the uv editor you are using, I know there are YouTube videos that demonstrate techniques, but none of them are showing how to start with UV "X" and end up with UV "Y"

    I personally use UVLayout by Headus. my first set, M4 for Genesis 2 Male, was done in Maya. No matter which program, though, it all comes down to moving point by point to match the uv you are converting to.

    Slosh, start a thread on this, it sounds very informative.

    Oh, I can't do that! LOL. First of all, I don't know that I could devote enough time to explaining things, plus a fella has to keep some of his secrets, right?

  • atticanneatticanne Posts: 3,009
    edited December 1969

    The process sounds very mysterious, time-consuming, and concentration-intensive to me. Thank you, Slosh, for sharing with us.

  • murgatroyd314murgatroyd314 Posts: 1,549
    edited December 1969

    What happened to the last three? I didn't have an internet connection yesterday due to reasons, and today they're giving a 404 error.

  • fixmypcmikefixmypcmike Posts: 19,613
    edited December 1969

    Murgatroyd said:
    What happened to the last three? I didn't have an internet connection yesterday due to reasons, and today they're giving a 404 error.

    I've reported this -- I'm guessing they hit their original 2-day cutoff.

  • PendraiaPendraia Posts: 3,598
    edited December 2014

    Slosh said:
    I don't know of any tutorials specific to making alternate uvs. I had to wing it the first time, then each successive product, I built on the previous experience. Depending on the uv editor you are using, I know there are YouTube videos that demonstrate techniques, but none of them are showing how to start with UV "X" and end up with UV "Y"

    I personally use UVLayout by Headus. my first set, M4 for Genesis 2 Male, was done in Maya. No matter which program, though, it all comes down to moving point by point to match the uv you are converting to.

    thanks Slosh, I have uvlayout...how do you get the uv map into their as well as the model? If I knew that I could probably work it out from there. It's nice to know that it's possible to do it in UVlayout though...off to do some googling.
    Post edited by Pendraia on
  • SloshSlosh Posts: 2,391
    edited December 1969

    Pendraia said:
    Slosh said:
    I don't know of any tutorials specific to making alternate uvs. I had to wing it the first time, then each successive product, I built on the previous experience. Depending on the uv editor you are using, I know there are YouTube videos that demonstrate techniques, but none of them are showing how to start with UV "X" and end up with UV "Y"

    I personally use UVLayout by Headus. my first set, M4 for Genesis 2 Male, was done in Maya. No matter which program, though, it all comes down to moving point by point to match the uv you are converting to.

    thanks Slosh, I have uvlayout...how do you get the uv map into their as well as the model? If I knew that I could probably work it out from there. It's nice to know that it's possible to do it in UVlayout though...off to do some googling.

    You need to import both models as one... In other words, if you were converting V4 to Dawn, you would load both models in DAZ Studio, lower them to base resolution, then export together as a single model. Load them in UVLayout choosing "Edit" instead of "New". Then isolate different sections, such as Face for each model. You will see V4 and Dawn faces superimposed in the uv window. Now, drag the Dawn uvs around to match the V4 uvs. Thanks to a request by me, Phil Dench has written a " snap point to point" feature into UVLayout, which makes it easier to match uv points. Once finished, save the double model, then take it into a modeling program (for me, it's ZBrush) and delete the V4 model, leaving only Dawn with her new uvs. Export this .obj and load Dawn (original, not this new one) into DAZ Studio. Use the Load UVs feature to import the new Dawn uvs, which will match up with V4 uvs. You can now put V4 textures on Dawn.

    Clearly, a more detailed step by step might be necessary for importing the new uvs to Studio and where to save them, but I've given you the general idea.

  • PendraiaPendraia Posts: 3,598
    edited December 1969

    Slosh said:
    Pendraia said:
    Slosh said:
    I don't know of any tutorials specific to making alternate uvs. I had to wing it the first time, then each successive product, I built on the previous experience. Depending on the uv editor you are using, I know there are YouTube videos that demonstrate techniques, but none of them are showing how to start with UV "X" and end up with UV "Y"

    I personally use UVLayout by Headus. my first set, M4 for Genesis 2 Male, was done in Maya. No matter which program, though, it all comes down to moving point by point to match the uv you are converting to.

    thanks Slosh, I have uvlayout...how do you get the uv map into their as well as the model? If I knew that I could probably work it out from there. It's nice to know that it's possible to do it in UVlayout though...off to do some googling.

    You need to import both models as one... In other words, if you were converting V4 to Dawn, you would load both models in DAZ Studio, lower them to base resolution, then export together as a single model. Load them in UVLayout choosing "Edit" instead of "New". Then isolate different sections, such as Face for each model. You will see V4 and Dawn faces superimposed in the uv window. Now, drag the Dawn uvs around to match the V4 uvs. Thanks to a request by me, Phil Dench has written a " snap point to point" feature into UVLayout, which makes it easier to match uv points. Once finished, save the double model, then take it into a modeling program (for me, it's ZBrush) and delete the V4 model, leaving only Dawn with her new uvs. Export this .obj and load Dawn (original, not this new one) into DAZ Studio. Use the Load UVs feature to import the new Dawn uvs, which will match up with V4 uvs. You can now put V4 textures on Dawn.

    Clearly, a more detailed step by step might be necessary for importing the new uvs to Studio and where to save them, but I've given you the general idea.

    Thank you so much Slosh! I had started to think that way and just tried to use m4 and dusk as a single object...thank you so much for your help.

  • WakakanadaWakakanada Posts: 208
    edited December 1969

    Slosh said:
    Ebajoy said:
    riftwitch said:
    AtticAnne said:
    Now I think they are all loaded. Earlier it only showed 3 for me.

    eta: Just looked in my cart and, yes, they are showing prices.

    They aren't all showing; K4 UV’s for G2M & G2F by Slosh isn't on the page. That's the only one I missed. According to this page: http://www.daz3d.com/forums/discussion/49616/ it was the Day 1 freebie.

    I sure hope they fix the glitch and include the K4 UVs as I have been kicking myself for missing that one as I didn't catch the freebie offer until a couple days in and it was already gone.

    Just to let everyone know... I had no idea the K4 UVs would not be in the list, and I'm sure it wasn't intentional. When DAZ gets back in the offices, I will ask them to put them out for a day since they got missed for some reason.

    Thanks Slosh!

  • curlrzcurlrz Posts: 1
    edited December 1969

    Hey All :-)

    I saw the Artemesia Gown in an email but when I came a few days later I couldn't find it and the link from the email brings up "404 Error Page Not Found'?

    Any knowledge?

    Thanks! :cheese:

  • Cris PalominoCris Palomino Posts: 11,690
    edited December 1969

    The Artemesia gown has been reported and post was merged to this thread as it is part of the PA Giveaway.

  • SloshSlosh Posts: 2,391
    edited December 1969

    I just wanted to let everyone know, K4 UVs for Genesis 2 (Freebie) is available again today. Grab it while you can. http://www.daz3d.com/kids-4-uvs-for-genesis-2-male-s-and-female-s

  • MattymanxMattymanx Posts: 6,955
    edited December 1969

    Im not seeing mine either but its is active in the store

    http://www.daz3d.com/make-it-fuzzy

  • PendraiaPendraia Posts: 3,598
    edited December 1969

    Slosh said:
    I just wanted to let everyone know, K4 UVs for Genesis 2 (Freebie) is available again today. Grab it while you can. http://www.daz3d.com/kids-4-uvs-for-genesis-2-male-s-and-female-s
    I'm getting a 404 for the link.
  • ddstargazer_8f4293ba59ddstargazer_8f4293ba59 Posts: 11
    edited December 1969

    Pendraia said:
    Slosh said:
    I just wanted to let everyone know, K4 UVs for Genesis 2 (Freebie) is available again today. Grab it while you can. http://www.daz3d.com/kids-4-uvs-for-genesis-2-male-s-and-female-s
    I'm getting a 404 for the link.

    I'm also getting 404

Sign In or Register to comment.