RELEASED!! CC Shave This - Body Hair for Genesis 8 Male(s) [Commercial]

2»

Comments

  • Carola OCarola O Posts: 3,823

    Got it the moment money landed on my account (very late birthday gift from my brother lol), working on a little something right now :)

  • ChangelingChickChangelingChick Posts: 3,211

    Ok, took me a little bit to get a render that I liked (and could be posted in the forums), but just wanted to say again how much I love this!

    (Click for larger version)

    Hoping this is enough of success to potentially see more in the future (even if it isn't until Gen 9+ wink ), one thing that I would definitely not mind seeing in the future is options for move coverage on the belly. But love this as is, definitely not a critique, just an idea for more.

    I love it!! :D I definitely plan to make folks even hairier :D 

     

     

    Silas3D said:

    Whilst this looks like a promising product, one thing that is throwing me off is the separation between the thigh hair and shin hair - the knees are bald!

    Is a knee preset included?

    Sorry to be picky but it just looks a bit odd given that hair should cover the whole leg.

    They aren't actually bald. The hair on the knees is just a little less dense, and it's attached in with the lower leg settings. I do see in the promos it's hard to see though. I've attached a quickie shot of the default load with black hair. It can get longer, thicker, curlier with the lower leg dials.

     

     

    Carola O said:

    Got it the moment money landed on my account (very late birthday gift from my brother lol), working on a little something right now :)

    Crossing my fingers for some of Darwin's boys ;) 

    knees.jpg
    749 x 871 - 177K
  • smoke14smoke14 Posts: 256

    Used both CC Beard Boss & CC Shave It for this image. Love the products. Thanks!

  • ChangelingChickChangelingChick Posts: 3,211

    Very nice :D A friend of mine would call this a "leaner" ;) 

  • SimonJMSimonJM Posts: 5,982
    edited June 2018

    Just doing one now - had (and having) a little issue with the knuckle hair not seeming to want to come out and visibly play too much, but all else looking good!  I'll upload the result shortly when it's done.

     

    And done: use CC beard and CC Shave this body hair (torso, arm, arm pit, and knuckle)

    image

    CC Hair.jpg
    2000 x 2000 - 3M
    Post edited by SimonJM on
  • ChangelingChickChangelingChick Posts: 3,211
    SimonJM said:

    Just doing one now - had (and having) a little issue with the knuckle hair not seeming to want to come out and visibly play too much, but all else looking good!  I'll upload the result shortly when it's done.

     

    And done: use CC beard and CC Shave this body hair (torso, arm, arm pit, and knuckle)

    image

    Nice! What character is that?

  • SimonJMSimonJM Posts: 5,982
    SimonJM said:

    Just doing one now - had (and having) a little issue with the knuckle hair not seeming to want to come out and visibly play too much, but all else looking good!  I'll upload the result shortly when it's done.

     

    And done: use CC beard and CC Shave this body hair (torso, arm, arm pit, and knuckle)

    image

    Nice! What character is that?

    It's textures for Floyd and around 50% of the Floyd morphs dialled in, plus around 66% of Aged for Liam

  • brimstoneomegabrimstoneomega Posts: 343
    edited June 2018

    Thanks again! Really liking this product, and there's so many options for customization! 

    Ronen Pinup 1.png
    2560 x 1920 - 5M
    Post edited by brimstoneomega on
  • ChangelingChickChangelingChick Posts: 3,211

    Thanks again! Really liking this product, and there's so many options for customization! 

    Very nice!

  • Carola OCarola O Posts: 3,823

    And... here it is CC... one man coming up as ordered ^^ It's a mix of Christian (85%) and Giovanni (35%) using Christian's skin and Liam's brows. And of course Shave this and Beard Boss. 

    Picnic Invitation

  • ChangelingChickChangelingChick Posts: 3,211
    Carola O said:

    And... here it is CC... one man coming up as ordered ^^ It's a mix of Christian (85%) and Giovanni (35%) using Christian's skin and Liam's brows. And of course Shave this and Beard Boss. 

    Picnic Invitation

    I love Darwin's boys :D You do great stuff with them :D

  • Carola OCarola O Posts: 3,823

    Thanks CC, I love them too :)

  • Sfariah DSfariah D Posts: 26,287
    3Ddreamer said:

    I have to say you showed great dedication research all those chest hair shapes and if you ever need any assistance I am sure some of us would volunteer to spend hours stairing at men's chests, in the name of research, of course.

    Went straight inot my cart and I'll check out when I get home from work in about an hour. :-)

    I do not mind looking at a great looking guy (for research that is) but the problem the man will notice and might come over to talk and flirt.

  • Hurdy3DHurdy3D Posts: 1,047
    gerster said:

    Probably my question went down in all the other posts, but I wanted to ask again if could add to your product some nipple adjustment morphs?

    To add it to the product would be quite involved, because of the modifier morphs. This would probably be much easier to do with deformers in DS than to add morphs for (especially since I'm not sure what kind of adjustments you mean).

     

    Sorry for the late answer, but I was busy with man projects in the last time.

    I added a screenshot of a G8 Female with your cheast hair. Because I dont want to violate the forum rules I used the  smooth render mode. I added red arrors where the nipple hohles of your product are and set a orange marker where the nippels are. You see, I does not fitt well ;)
    I asked for a adjustment morphs like on many (head) hair products, that allow us to adjust this nipple hohle manually.
    Somethin like:


    R Nipple Up Down (-100% is down, 100% is up)
    R Nipple Left Right
    R Nipple Size
    L Nipple Up Down
    ....

    Screenshot (13).png
    918 x 621 - 395K
  • ChangelingChickChangelingChick Posts: 3,211
    edited June 2018
    gerster said:
    gerster said:

    Probably my question went down in all the other posts, but I wanted to ask again if could add to your product some nipple adjustment morphs?

    To add it to the product would be quite involved, because of the modifier morphs. This would probably be much easier to do with deformers in DS than to add morphs for (especially since I'm not sure what kind of adjustments you mean).

     

    Sorry for the late answer, but I was busy with man projects in the last time.

    I added a screenshot of a G8 Female with your cheast hair. Because I dont want to violate the forum rules I used the  smooth render mode. I added red arrors where the nipple hohles of your product are and set a orange marker where the nippels are. You see, I does not fitt well ;)
    I asked for a adjustment morphs like on many (head) hair products, that allow us to adjust this nipple hohle manually.
    Somethin like:


    R Nipple Up Down (-100% is down, 100% is up)
    R Nipple Left Right
    R Nipple Size
    L Nipple Up Down
    ....

    Because of the modifier morphs that would have to be involved (and pass testing) to add these and the way the hair in the area was created, I don't think this is something I can do at this time. The bones are placed differently in the male and female models, so even with modifiers, unless it was made specifically for the female, it wouldn't behave properly. I'd recommend using a different preset that doesn't cover the pecs as fully so it isn't as noticeable.

    Post edited by ChangelingChick on
  • ArielRGHArielRGH Posts: 105

    Dear @ChangelingChick, right now this product is top priority in my wishlist. I regret not picking it up when it just came. Do you know when is it eligible for discounts? Thank you in advance ^^

  • ChangelingChickChangelingChick Posts: 3,211
    ArielRGH said:

    Dear @ChangelingChick, right now this product is top priority in my wishlist. I regret not picking it up when it just came. Do you know when is it eligible for discounts? Thank you in advance ^^

    Thank you! It should be discountable the first week of August, so not too long :D And Beard Boss is already discountable :D

  • ArielRGHArielRGH Posts: 105
    edited July 2018

    Thank you!

    I already got Beard Boss, love it  B-)

    Post edited by ArielRGH on
  • FSMCDesignsFSMCDesigns Posts: 12,755

    LOL, I can't figure out which is more crazy to me, asking a vendor when something goes on sale or a vendor telling a customer when it might go on sale, LOL surprise

    Keep up the great work ChanglingChick! yes

  • ArielRGHArielRGH Posts: 105

    It's the rules of the game, there are sales. Yay for sales!

  • ChangelingChickChangelingChick Posts: 3,211

    And I'd rather make a sale at a discount than not at all... to a point at least XD

  • LenioTGLenioTG Posts: 2,118

    Hi! :D

    Great product, it gives characters a lot more realism!

    It works (I had to install it via DIM, because it didn't show up on Connect, I've already sent a ticket for that) for every body part, except for the torso.
    I've made different tests with 3 different figures and playing with all the settings, but they're the only ones who don't show up.

    Screen.JPG
    1908 x 1042 - 276K
  • ChangelingChickChangelingChick Posts: 3,211
    edited May 2019
    TGFan4 said:

    Hi! :D

    Great product, it gives characters a lot more realism!

    It works (I had to install it via DIM, because it didn't show up on Connect, I've already sent a ticket for that) for every body part, except for the torso.
    I've made different tests with 3 different figures and playing with all the settings, but they're the only ones who don't show up.

    When it loads in, it will be flat and not visible. Select the hair in the scene tab, then apply the shaping preset you'd like to use. I did the chest hair differently than the others for a variety of reasons that I won't get into. But basically for shapes it was easier to start at 0 then add length.

    Post edited by ChangelingChick on
  • LenioTGLenioTG Posts: 2,118
    TGFan4 said:

    Hi! :D

    Great product, it gives characters a lot more realism!

    It works (I had to install it via DIM, because it didn't show up on Connect, I've already sent a ticket for that) for every body part, except for the torso.
    I've made different tests with 3 different figures and playing with all the settings, but they're the only ones who don't show up.

    When it loads in, it will be flat and not visible. Select the hair in the scene tab, then apply the shaping preset you'd like to use. I did the chest hair differently than the others for a variety of reasons that I won't get into. But basically for shapes it was easier to start at 0 then add length.

    That's what I was doing, but nothing is happening! :(

    I've tried it on many different figures.

    I load the torso hair, I select them, I apply the shape and I use those thicken and lenghten features too, but I still can't see them!

    I've tried from the surface pane too, to change materials, to look for parameters...but still nothing.

    Am I doing something wrong?

  • ChangelingChickChangelingChick Posts: 3,211

    When you say select them, do you mean the hair itself or the figure it's on? Because it needs to be the hair itself. Other than that, I'm not sure what to tell you. Maybe the install is messed up and you need to reinstall? 

  • LenioTGLenioTG Posts: 2,118
    edited May 2019

    When you say select them, do you mean the hair itself or the figure it's on? Because it needs to be the hair itself. Other than that, I'm not sure what to tell you. Maybe the install is messed up and you need to reinstall? 

    I was selecting the hair! ^^

    It was the install.
    Now it's working, doing the same things!

    Nice product by the way, I'm adding it to my list of very useful products! :D (like your beard set, that I'm using a lot!)

    Post edited by LenioTG on
  • ChangelingChickChangelingChick Posts: 3,211
    TGFan4 said:

    When you say select them, do you mean the hair itself or the figure it's on? Because it needs to be the hair itself. Other than that, I'm not sure what to tell you. Maybe the install is messed up and you need to reinstall? 

    I was selecting the hair! ^^

    It was the install.
    Now it's working, doing the same things!

    Nice product by the way, I'm adding it to my list of very useful products! :D (like your beard set, that I'm using a lot!)

     

    Great!! So glad you got it working :D And I'm glad you like them :D 

  • So how exactly does one get the chest hair to show? No directions, very confusing.

  • DrowElfMorwen said:

    So how exactly does one get the chest hair to show? No directions, very confusing.

    Because there are a large variety of shapes to choose from and mix, the hair loads in at zero. The shaping presets included can be used (select the hair and apply the shaping preset), or you can use the shaping dials in the parameters pane. 

Sign In or Register to comment.