Loading...
> >

Satyros the Satyr [commercial]

RawArtRawArt Posts: 5,893
edited December 1969 in Daz PA Commercial Products

Satyros the Satyr

Now Available!!

http://www.daz3d.com/raw-satyros


Myth comes alive once again as Satyros brings the party to life.
A male and female satyr set for GenesisWith seperate legs and body morphs for ultimate versitility. So no matter how you want your character to look, the options are just a dial twist away.
This set comes complete with life-like LAMH presets (for D/S) to really fill out the look.


Product Includes:

• Male and Female Character preset Morphs
• One Horn Geograft
• One Tail Geograft
• One Male face MAT with beard
• One Male face MAT with beard and SSS (for D/S Only)
• One Female MAT
• One Female MAT with SSS (for D/S Only)
• One Male MAT
• One Male MAT with SSS (for D/S Only)
• One Male Genital MAT
• One Male Genital MAT with SSS (for D/S Only)
• One Female Horn MAT
• One Female Horn MAT with SSS (for D/S Only)
• One Male Horn MAT
• One Male Horn MAT with SSS (for D/S Only)
• One Tail MAT
• One Tail MAT with SSS (for D/S Only)
• Three LAMH presets

Satyros-POP1.jpg
500 x 650 - 174K
Satyros-POP2.jpg
500 x 650 - 112K
Satyros-Main.jpg
500 x 650 - 205K
«1

Comments

  • JabbaJabba Posts: 1,460
    edited December 1969

    Oh, the original "horny devil"... could have some fun with this ;-)

  • RawArtRawArt Posts: 5,893
    edited December 1969

    I should note that the hoof and face morphs are separate, so you can adjust it however you like.

    Rawn

  • Carola OCarola O Posts: 3,823
    edited December 1969

    *giggles* they are Cute (not sure that is the first thing you want to hear of your creations.. but still ;P)

    Now I really wish I could have gotten that free lamh player to work, but alas.. it refused too, even after the update *shrugs* Which leads to me asking, is it possible to use these without the lamh presets?

  • Sfariah DSfariah D Posts: 26,282
    edited December 1969

    Wow! You are always putting out amazing products!

  • RawArtRawArt Posts: 5,893
    edited December 1969

    Carola O said:
    *giggles* they are Cute (not sure that is the first thing you want to hear of your creations.. but still ;P)

    Now I really wish I could have gotten that free lamh player to work, but alas.. it refused too, even after the update *shrugs* Which leads to me asking, is it possible to use these without the lamh presets?

    The LAMH player shoud still be free

    and yes..it can be used without LAMH...it is fully textured

    Rawn

  • RawArtRawArt Posts: 5,893
    edited December 1969

    Kulay Wolf said:
    Wow! You are always putting out amazing products!

    Thanx :)

  • Miss BMiss B Posts: 3,071
    edited July 2013

    I just wonder where you come up with all these ideas. Do you ever think a day will come when you'll run out of new characters to create?

    BTW, love the second render. He has such attitude. :coolsmirk:

    Post edited by Miss B on
  • RawArtRawArt Posts: 5,893
    edited December 1969

    Miss B said:
    I just wonder where you come up with all these ideas. Do you ever think a day will come when you'll run out of new characters to create?

    BTW, love the second render. He has such attitude. :coolsmirk:

    I sure hope not :coolgrin:

  • Carola OCarola O Posts: 3,823
    edited December 1969

    RawArt said:
    Carola O said:
    *giggles* they are Cute (not sure that is the first thing you want to hear of your creations.. but still ;P)

    Now I really wish I could have gotten that free lamh player to work, but alas.. it refused too, even after the update *shrugs* Which leads to me asking, is it possible to use these without the lamh presets?

    The LAMH player shoud still be free

    and yes..it can be used without LAMH...it is fully textured

    Rawn

    Lovely, he will be a fun one to put into my runtime.. erhm.. soon (not Daz soon though ;P)

    And yes, it's still free.. still in my product library even, but it refuses to work for me (keeps crashing).. so I kinda have given up on it atleast for now :) However, I am not going to derail your thread with that *smiles*

  • PendraiaPendraia Posts: 3,598
    edited December 1969

    Wow...all I need is a good dryad now! Pay day today so I will hopefully be able to afford it.

  • michellecelebriellemichellecelebrielle Posts: 264
    edited December 1969

    RawArt said:
    I should note that the hoof and face morphs are separate, so you can adjust it however you like.

    Rawn


    That's what I was wondering; going in the cart :D
  • JabbaJabba Posts: 1,460
    edited July 2013

    I reduced his scale to 100% so that I could use the dynamic loincloth (a wee bit of post work to prevent hair from looking like it's growing out of the loincloth, as I'd set dynamics to ignore LAMH presets for a smooth drape animation)...

    Satyr_Is_Not_Dead.jpg
    1545 x 2000 - 840K
    Post edited by Jabba on
  • RawArtRawArt Posts: 5,893
    edited December 1969

    Jabba101 said:
    I reduced his scale to 100% so that I could use the dynamic loincloth (a wee bit of post work to prevent hair from looking like it's growing out of the loincloth, as I'd set dynamics to ignore LAMH presets for a smooth drape animation)...

    Very cool!

  • AsgardNorthAsgardNorth Posts: 26
    edited December 1969

    Okay, need to ask this question yet again :(

    The female morph works great, but the male does not. Does the male require Freak 5 to function properly?

  • RawArtRawArt Posts: 5,893
    edited December 1969

    AsgardNorth said:
    Okay, need to ask this question yet again :(

    The female morph works great, but the male does not. Does the male require Freak 5 to function properly?

    Yes it does...did it not get listed again?

  • AsgardNorthAsgardNorth Posts: 26
    edited December 1969

    I did not see it anywhere. :(

  • RawArtRawArt Posts: 5,893
    edited December 1969

    Sorry...I am fireing a letter off to daz......though they probably wont get it till tomorrow
    Thanx for letting me know

  • AsgardNorthAsgardNorth Posts: 26
    edited December 1969

    No problem. Just sad that I have to return this one too. Maybe some day I can catch Freak 5 on sale and use your latest products! (Not complaining at you, at the time I didn't think I would ever need Freak 5. doh!)

  • RawArtRawArt Posts: 5,893
    edited December 1969

    Actually...the face and hoof morphs should be able to be applied on their own without freak.
    Freak5 only shows up in the library preset that you click on.
    The dials should work independently and can be used however you like.

    Rawn

  • AsgardNorthAsgardNorth Posts: 26
    edited December 1969

    I'll take a look. I know the issue with not having Freak 5 installed seems to be with Look at my hair saying incompatible figure, but I will play around with it some more and see if I can get it to work. :)

  • AsgardNorthAsgardNorth Posts: 26
    edited December 1969

    Hmm, think the LAMH part was due to another issue, now it is working, just throws up a warning about not having Freak 5. (Which Ironically would have answered my question if that had worked the first time. hahaha)

  • RawArtRawArt Posts: 5,893
    edited December 1969

    LAMH requires that you have the tail and horns applied (and attach the tail before the horns...for some reason the other way around can mess up lamh as well..that should be in the readme)
    Also LAMH wont work with the genitals attached either.

  • AsgardNorthAsgardNorth Posts: 26
    edited December 1969

    oh. That might have caused it too. Got it working and other morphs applied, so this one is a keeper!! Woohoo!!

  • RawArtRawArt Posts: 5,893
    edited December 1969

    awesome!....glad it all worked out.

  • tonymousetonymouse Posts: 230
    edited December 1969

    Is it just me, the DL of the Satyros PCF's file contains no Poser info. It looks exactly the same as the Core File.

  • tonymousetonymouse Posts: 230
    edited December 1969

    wow guess I was the only Poser user to buy this??

  • RawArtRawArt Posts: 5,893
    edited December 1969

    tonymouse said:
    wow guess I was the only Poser user to buy this??

    It was tested in poser by daz's qa so it should be fine.
    If you have an issue, it woul d be best to contact daz's customer service and I am sure they can get it all working asap

  • tonymousetonymouse Posts: 230
    edited December 1969

    I have submitted a ticket on it ;) Thanks for the reply.

  • Design Anvil - Razor42Design Anvil - Razor42 Posts: 1,237
    edited December 1969

    Thanks for this one, great character! works well, despite some Lamh crashes when saving and reloading.

    I have been working on a pose set and some props for him.
    Earlier stages yet but I have been busy modelling props and a lioncloth.
    Tested some rigging and mats today.
    Plenty of work to do but thought I would share some wips here if you don't mind.

    Props_satyr.png
    1319 x 1174 - 947K
    Satyr1.jpg
    1000 x 821 - 466K
  • RawArtRawArt Posts: 5,893
    edited December 1969

    very cool....I couldnt find a pan-pipe anywhere in my runtime...so that would be very useful for this guy (among your other things)

Sign In or Register to comment.