Loading...
> >

GENERAL FREEBIE REQUESTS Part 2

1…5681011…100

Comments

  • StratDragonStratDragon Posts: 3,168
    edited December 1969

    robkelk said:
    StratDragon said:
    tjeb said:
    We're getting there, but slowly...
    From left to right you can see improvements.
    There is still an issue in the door; you see the diagonal line;

    these look great! All I need is a hat and a tommy gun so I can hang out the window and yell "Eat lead you doity rats!"


    Hat:
    http://www.sharecg.com/v/13150/poser/Fedora-Hat-Prop-for-Poser

    Tommy gun:
    http://www.oyonale.com/modeles.php?lang=en&page=47

    (I suppose the comment could have been rhetorical, but this is the Freebie Request thread... ;-P )
    It started out rhetorical but those models are excellent and too good to pass up!

  • YamanekoYamaneko Posts: 52
    edited December 1969

    Is there a compilation of V3/ M3 Freebies? I looked at the compliation of links to Freebies, and there were lists for m2/ v2, m4/ v4 as well as for A3 and H3, but nothing for V3 and M3.

    Did I just overlook something?

    Thanks!

  • ChoholeChohole Posts: 33,604
    edited December 1969

    colingmoser said:
    Is there a compilation of V3/ M3 Freebies? I looked at the compliation of links to Freebies, and there were lists for m2/ v2, m4/ v4 as well as for A3 and H3, but nothing for V3 and M3.

    Did I just overlook something?

    Thanks!

    Unfortunately the old lists contained so many dead links that It was not worth transferring them over.

  • Faeryl WomynFaeryl Womyn Posts: 3,628
    edited December 1969

    Dark Angel, I went through the list of clothes by Sanbie and Deni that I have and NitaB had and there is no poodle skirt. Your best bet is to ask Sanbie at PFD and see if she still has it.

  • WilmapWilmap Posts: 2,917
    edited December 1969

    I have a free Poodle skirt over at ShareCG, if that's any use to you.

    http://www.sharecg.com/v/70586/view/21/DAZ-Studio/Genesis-50s-Style-Outfit

  • YamanekoYamaneko Posts: 52
    edited December 1969

    chohole said:
    colingmoser said:
    Is there a compilation of V3/ M3 Freebies? I looked at the compliation of links to Freebies, and there were lists for m2/ v2, m4/ v4 as well as for A3 and H3, but nothing for V3 and M3.

    Did I just overlook something?

    Thanks!

    Unfortunately the old lists contained so many dead links that It was not worth transferring them over.

    Thank you for your reply. I guess it's back to the Easter egg hunt!

  • mizzjax_9babe81e8emizzjax_9babe81e8e Posts: 0
    edited December 1969

    I've been looking for and can't find any clothing for Star wars: The Old republic. Admittedly, the game hasn't been out quite two years yet, and some of the clothing in the game blows but the derth of any decent armored robes, or robes period that would fit the style makes me want them all the more. Hell, create a couple of sets and SELL them, i'll be the first one there screaming at you to take my money! Until then i'd really like to see someone make some high res jed/sith robes for genisis?

  • Chelle the CatChelle the Cat Posts: 239
    edited December 1969

    Is there a prop of an eye out there anywhere? Something that could be placed in the middle of a figure's forehead for example (and thus not a right or left eye).

  • KeryaKerya Posts: 10,943
    edited December 1969

    chellethecat said:
    Is there a prop of an eye out there anywhere? Something that could be placed in the middle of a figure's forehead for example (and thus not a right or left eye).

    The best eye ever:
    https://sites.google.com/site/bagginsbill/free-stuff/bbeye

  • Chelle the CatChelle the Cat Posts: 239
    edited December 1969

    Kerya said:
    chellethecat said:
    Is there a prop of an eye out there anywhere? Something that could be placed in the middle of a figure's forehead for example (and thus not a right or left eye).

    The best eye ever:
    https://sites.google.com/site/bagginsbill/free-stuff/bbeye

    Looks good, do you know by any chance if it's the whole eye or just an eyeball?

  • TjebTjeb Posts: 507
    edited December 2013

    @chellethecat:
    I think you will like this:
    http://www.sharecg.com/v/33449/browse/11/Poser/EyeGur

    PrivateEye.gif
    220 x 220 - 372K
    Post edited by Tjeb on
  • galactica1981galactica1981 Posts: 1,251
    edited December 2013

    I would love if it if people could offer any presets they've created for Stonemason's Modular Sci-Fi Kit 01. With a preset, you still have to buy the product in order for it to work.

    For example, I would love to have the columns/pillars shown in the picture below, but I haven't been able to figure out how they were created.

    001.jpg
    777 x 539 - 257K
    Post edited by galactica1981 on
  • ChoholeChohole Posts: 33,604
    edited December 1969

    galactica1981 said:
    I would love if it if people could offer any presets they've created for Stonemason's Modular Sci-Fi Kit 01. With a preset, you still have to buy the product in order for it to work.

    For example, I would love to have the columns/pillars shown in the picture below, but I haven't been able to figure out how they were created.

    I happen to know that someone has mentioned making a script to do something like this. Not sure how long it would take to happen though.

    Presets will only work if the person knows how to create them legally.

  • galactica1981galactica1981 Posts: 1,251
    edited December 1969

    chohole said:
    galactica1981 said:
    I would love if it if people could offer any presets they've created for Stonemason's Modular Sci-Fi Kit 01. With a preset, you still have to buy the product in order for it to work.

    For example, I would love to have the columns/pillars shown in the picture below, but I haven't been able to figure out how they were created.

    I happen to know that someone has mentioned making a script to do something like this. Not sure how long it would take to happen though.

    Presets will only work if the person knows how to create them legally.

    Perhaps preset was the wrong word. Couldn't someone just save it as a .duf file and then make that available?

  • ChoholeChohole Posts: 33,604
    edited December 2013

    I think it would be better to wait and see if the script gets created, there are so many options in this set, and I am not sure that the PA in question would be too happy at possible errors generated from people who may not know what is the right way to do things.

    Of course another way of dealing with this is to approach the PA and ask him what settings he used to do that particular promo shot,

    He is generally a very helpful PA, and quite approachable.

    Post edited by Chohole on
  • KeryaKerya Posts: 10,943
    edited December 1969

    chohole said:
    galactica1981 said:
    I would love if it if people could offer any presets they've created for Stonemason's Modular Sci-Fi Kit 01. With a preset, you still have to buy the product in order for it to work.

    For example, I would love to have the columns/pillars shown in the picture below, but I haven't been able to figure out how they were created.

    I happen to know that someone has mentioned making a script to do something like this. Not sure how long it would take to happen though.

    Presets will only work if the person knows how to create them legally.

    Do you remember the thread? I am searching for a thread about it and can't find one.

    Apart from that: scene subsets would be perfectly legal - that's why Daz changed the scene saving - no models included, just filepaths to the models.

  • ChoholeChohole Posts: 33,604
    edited December 1969

    Kerya said:
    chohole said:
    galactica1981 said:
    I would love if it if people could offer any presets they've created for Stonemason's Modular Sci-Fi Kit 01. With a preset, you still have to buy the product in order for it to work.

    For example, I would love to have the columns/pillars shown in the picture below, but I haven't been able to figure out how they were created.

    I happen to know that someone has mentioned making a script to do something like this. Not sure how long it would take to happen though.

    Presets will only work if the person knows how to create them legally.

    Do you remember the thread? I am searching for a thread about it and can't find one.

    Apart from that: scene subsets would be perfectly legal - that's why Daz changed the scene saving - no models included, just filepaths to the models.

    It was mentioend in passing in one thread, but off hand I can't remember which one.

  • StonemasonStonemason Posts: 1,180
    edited December 1969

    galactica1981 said:
    I would love if it if people could offer any presets they've created for Stonemason's Modular Sci-Fi Kit 01. With a preset, you still have to buy the product in order for it to work.

    For example, I would love to have the columns/pillars shown in the picture below, but I haven't been able to figure out how they were created.


    hi,that's two copies of 'Msf_Butress04.daz', with one rotated 90 degrees
  • StratDragonStratDragon Posts: 3,168
    edited December 1969

    I'm ISO something other than the Joint Editor to zero the origin points of objects somewhere in the DS 4.5 - 4.6 upgrade path the Move Origins script that was an awesome free script stopped working and I'm finding the joint editor works for some things, others it craps out on like nested objects that can't be un-parented and shouldn't be either.

  • KeryaKerya Posts: 10,943
    edited December 1969

    StratDragon said:
    I'm ISO something other than the Joint Editor to zero the origin points of objects somewhere in the DS 4.5 - 4.6 upgrade path the Move Origins script that was an awesome free script stopped working and I'm finding the joint editor works for some things, others it craps out on like nested objects that can't be un-parented and shouldn't be either.

    I have no idea how to ... but a search came up with mcasuals script here:
    https://sites.google.com/site/mcasualsdazscripts3/mcjchangeorientation
    ???

  • StratDragonStratDragon Posts: 3,168
    edited December 1969

    Kerya said:
    StratDragon said:
    I'm ISO something other than the Joint Editor to zero the origin points of objects somewhere in the DS 4.5 - 4.6 upgrade path the Move Origins script that was an awesome free script stopped working and I'm finding the joint editor works for some things, others it craps out on like nested objects that can't be un-parented and shouldn't be either.

    I have no idea how to ... but a search came up with mcasuals script here:
    https://sites.google.com/site/mcasualsdazscripts3/mcjchangeorientation
    ???

    Let me try that, MCasual makes some amazing stuff, I probably shoulda checked there first. Thanks Kerya!

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    I'm running short on time and having trouble finding a few freebies... Does anyone know of a hookah, a caterpillar, or a toadstool available for free?

    (I thought I knew where to find these, but I didn't. Curiouser and curiouser...)

  • patience55patience55 Posts: 7,006
    edited December 2013

    Turbosquid has a free hookah.

    Found it: Basic Hookah

    Post edited by patience55 on
  • DollyGirlDollyGirl Posts: 2,656
    edited December 1969

    robkelk said:
    I'm running short on time and having trouble finding a few freebies... Does anyone know of a hookah, a caterpillar, or a toadstool available for free?

    (I thought I knew where to find these, but I didn't. Curiouser and curiouser...)

    Will this do?
    http://www.turbosquid.com/FullPreview/Index.cfm/ID/470790 you will have to convert it. It is .3ds

  • mjc1016mjc1016 Posts: 15,001
    edited December 2013

    robkelk said:
    I'm running short on time and having trouble finding a few freebies... Does anyone know of a hookah, a caterpillar, or a toadstool available for free?

    (I thought I knew where to find these, but I didn't. Curiouser and curiouser...)

    'Shrooms
    http://www.renderosity.com/mod/freestuff/details.php?item_id=23576

    http://www.renderosity.com/mod/freestuff/details.php?item_id=68822

    Hookah...set up for Poser, so it's got a posable hose...

    http://www.renderosity.com/mod/freestuff/details.php?item_id=60544

    Post edited by mjc1016 on
  • KeryaKerya Posts: 10,943
    edited December 1969

    Caterpillar (Poser cr2)
    http://spatz.pagesperso-orange.fr/baseus.html

  • Aave NainenAave Nainen Posts: 1,108
    edited December 1969

    Basketball and Hoop, Soccer ball and Net, Volleyball and net, Baseball bat, ball, diamond, spectator stands etc. If anyone can point me to where I might find these items it would be greatly appreciated!

  • ChoholeChohole Posts: 33,604
    edited December 1969

    Moving this into the freebie request thread

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Thanks, folks!

  • DollyGirlDollyGirl Posts: 2,656
    edited December 1969

    Aave Nainen said:
    Basketball and Hoop, Soccer ball and Net, Volleyball and net, Baseball bat, ball, diamond, spectator stands etc. If anyone can point me to where I might find these items it would be greatly appreciated!

    The two main sites we go to first are Renderosity:
    http://www.renderosity.com/mod/freestuff/index.php
    Use the search function and type in what you are looking for. I typed in Basketball hoop and got this:
    http://www.renderosity.com/mod/freestuff/details.php?item_id=10533
    The second site is Sharecg:
    http://www.sharecg.com/index.php
    In the upper right corner you will see a box with a magnifying glass type in what you are looking for there and it will list what is available in all their categories so you will get art as well as models. You will have to look at the description to determine if you can use that type of model in the software you have. I typed in basketball and got these:
    http://www.sharecg.com/v/7563/browse/5/3D-Model/basketball-obj-model-hires
    http://www.sharecg.com/v/43035/browse/11/Poser/The-Court

    You could also do a search here in the Freepozitory and see if you find anything. In the monthly freebie contest we list the links where we get our freebies from so you might get some hits that way.

    Another place to go is Turbosquid. I did a search on baseball and got this listing:
    http://www.turbosquid.com/Search/Index.cfm?keyword=baseball
    As in the case of Sharecg you will have to look at the type of model to see if you can use it with your software.

This discussion has been closed.