Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2025 Daz Productions Inc. All Rights Reserved.
Comments
It may have to do whit the installation of the Genesis Essentials, after I re installed it and installed the actual everything was fine again , it was in the last build .
I installed new build on a new computer so everything is fresh and it does works fine no crash or anything , the only issue I have is with replacing the Deltas , create unique morphs works fine, so I linked the unique morphs to replace the Deltas as I don't want to waste another day
First, congratulations on the smart move with making a few freebies back. This certainly encourages new users and binds the current customers to the shop. It is like back in 2012 :coolgrin:!
The bundles include an Interactive Lesson, presets, and all the content needed to complete the lesson.
Obviously these lessons are geared towards new users. Rather than clutter the new release page with stuff that has essentially already been released we decided to sort of make these a silent release and then drive traffic with an email campaign to new users.
The bundles are there for everyone, though, so if you'd like to check them out feel free. I think the most expensive one is $5.00, so even if you own most of the content in the bundle, it may still be worth it to get it.
Please, can you list EVERY interactive lesson you released? Regarding the new bundles, I'm aware of:
- Day At The Beach (grabbed)
- SF Warrior (grabbed)
- Inside The Asylum (grabbed)
- Slaying The Dragon (I'll pass unless it is free - I make poses myself and apart from them, I've already got Basic Hair and Dragon Tower)
There certainly are two more of what could be considered such tutorial: Fiery Genesis (since DS4.5) and Barefoot Dancer (Gen2F Essentials Bundle). I see no Dagger Dance(r) though. Is that supposed to go with Gen2M? Slaying The Dragon states it is the sixth installment. How do you count that? I'd love to see all the lessons, cannot you list them in one place please?
cecilia.robinson:
Where do you see evidence of bringing back freebies for everyone?
I see only the same scheme they went to with the freebies with the site reboot; Freebies only to those who are PC members, or buy something and get a freebie. Still feels like 2014 to me...
Regarding Dagger Dance supposedly being available to us, I don't have that in my Product Library as well (nothing new from DAZ has been added since my last purchase).
Where did you see this item freebie, or suggested bundles? My search only yielded two results: Predatron's Goblin ($24.95), and Goblin and Hair Bundle ($39.95).
DAZ_employees:
Can you please list what/where available cecilia is referring to?
Also, I did not download all the extras for this official release per the release post stating that nothing has changed since prior release, which I have all the downloads for.
Have you added content since previous builds, and misinformed us of the need to download the new content?
And, I second cecilia's request. Please list all that is currently available for this current release of Studio.
*EDIT: Grabbed the free bundles in the post above, so I now see what freebies you were reffering to, cecilia. DAZ gives no indication of it being free until you actually open up the product page (way to hide things, DAZ).
I think the Dagger Dreams tutorial is part of the G2Female essentials bundle. It used the original Dancer tutorial but adds a dagger and new pose to it.
I don't think it is, wilmap. Unless, DAZ included the blade set by Valandar (or one blade). Is the G2 Essentials calling it "Dagger Dance", or the Valandar product name "Dagger Dreams"?
Anyways, I found the Dagger Dreams product included in the Slaying The Dragon Bundle (Currently $3.00 - Not a freebie). This is probably why a few of us do not have it in our Product Library (we haven't purchased the bundle).
I plan on purchasing, but unless I can shove cash into my laptop, I will have to wait three weeks until my digital purchaser returns from a trip to purchase. Here's to hoping it will still be on sale then...
I was going to send you the links, but then I scrolled down your post and saw you figured it out. There is no simple way to find real deals, that's why I always sort by price when visiting the shop and I check every department separately. Team Dystopia - the real freebies you don't have to buy anything to get - can be found under Environments & Props if I'm right, but they're not featured in Free Items. The same with marvellous Dreamlight tutorials.
I believe if you go through the Barefoot Dancer tutorial in DS4, at the end it gives you a code to get the daggers for free.
Are you sure about it? Do I have to finish the whole tutorial, perhaps even render it to get a code?
Damn, I thought this one was over for me...
At the very beginning of the tutorial it says
It only takes a few minutes to do, and yes, you do have to render it ;)
It only takes a few minutes to do, and yes, you do have to render it ;)
Oh my... :)
I will have to go through it then. A freebie's a freebie after all.
...OK may have finally found a bug (well, besides the CMS continuing to "poop out" intermittently), not anything crashwrothy but unusual nonetheless.
Was getting ready to build a scene setup for a character which I saved as a Scene Subset earlier. I had clicked "New" to clear the viewport then loaded the basic set I planned to use. Afterwards, while arranging an environmental prop, I noticed the character's name was on the "Fit to" selection bar in the parameters tab. The odd thing is I hadn't even merged the character into the scene yet.
I saved what I had loaded, shut the application down and reopened it and everything was back to normal again.
Now while it didn't have any effect on the set or props, I am concerned that this could be a similar issue to what used to occur when items were deleted but the shaders didn't clear from the memory buffer (which prompted creation of the Clear Undo Stack script). This could be why autofit sometimes doesn't trigger properly when clothing content is loaded as well as may also interfere with the fitting process when working on setting up separate individual characters in the same session.
KK have you not Noticed that DS4.5+ now comes with this? I added it to my Scripts Menu for easy use.
...thanks.
I hadn't noticed this script. Probably because I don't look at or use scripts. Guess I better do some more studying. Thanks for pointing this out, Jaderail. It should take care of some of my problems too.:red:
It's easy to add scripts and even load files to the Scripts menu. See below..
How do you use the "Purge Memory.dsa" script? I tried running it while watching the Windows Task Manager after having done a few random things, but all it does is make a very minor increase in memory usage.
I only Run it between New Scenes but if you watch your Surfaces it does the same as Clear undo Stack. Will purge all files not in use. It just replaced Clear Undo IMHO.
OK I just installed the new version and when I try to open it, nothing happens, DazStudio is open in my processes but it doesn't actually open so I can do anything.
Any ideas? I have a lot of content that I haven't done anything with yet that I have ideas for .....
EDIT: This is getting extremely frustrating, I have uninstalled reinstalled, rebooted and had to kill the process several times because it does nothing.....
EDIT II: Uninstalling AGAIN, to try a manual install instead of using the download manager......
is there anything in your log file? In Windows that's C:\Users\YourUsername\AppData\Roaming\DAZ 3D\Studio4 Public Build\log.txt
If this is the general release rather than the beta, the log will be C:\Users\YourUsername\AppData\Roaming\DAZ 3D\Studio4\log.txt
There is no solder for Daz Studio..... sorry spoke too soon, sec.
Okay there is a log file, what do I do with it?
Post the last section - a couple of dozen lines should do - here. As Mike says, I have the wrong version since this isn't the beta thread.
3D/DAZStudio4/docs/Plugins/PolygonGroupEditor/PolygonGroupEditor.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/TextureAtlas/TextureAtlas.dsx
+++++++++++++++ DAZ Studio 4.6.2.120 starting +++++++++++++++++
Platform bits: 64
Qt Version: 4.8.4
Running on Windows 7, Build 7601, Service Pack 1
CPU Information:
CPU String: AuthenticAMD
CPU Brand String: AMD A6-3620 APU with Radeon(tm) HD Graphics
Cache Line Size = 64
L2 Associativity = 8
Cache Size = 1024
Model = 1
Family = 15
Extended family = 3
CLFLUSH cache line size = 64
APIC Physical ID = 2
Supported CPU Features:
SSE3 New Instructions
MONITOR/MWAIT
x87 FPU On Chip
Virtual-8086 Mode Enhancement
Debugging Extensions
Page Size Extensions
Time Stamp Counter
RDMSR and WRMSR Support
Physical Address Extensions
Machine Check Exception
CMPXCHG8B Instruction
APIC On Chip
SYSENTER and SYSEXIT
Memory Type Range Registers
PTE Global Bit
Machine Check Architecture
Conditional Move/Compare Instruction
Page Attribute Table
Page Size Extension
CFLUSH Extension
MMX Technology
FXSAVE/FXRSTOR
SSE Extensions
SSE2 Extensions
Hyper-threading Technology
Physical Memory:
Total: 3.3 GB (3644538880)
Avail: 1.2 GB (1365221376)
Virtual Memory:
Total: 7.9 TB (8796092891136)
Avail: 7.9 TB (8795864809472)
Current Memory Usage: 62%
Current DateTime:
Loc: Mon May 19 14:46:40 2014
UTC: Mon May 19 18:46:40 2014
Temp Data:
Location = C:/Users/Jim Robinson/AppData/Roaming/DAZ 3D/Studio4/temp
Disk Total: 448.6 GB (481747267584)
Disk Avail: 24.1 GB (25904283648)
Locale: en_US
No translator found.
Reading style definition J:/program Files/DAZ 3D/DAZStudio4/resources/style/Main Street.style
Creating managers
Reading help index
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/DAZ Studio/DAZStudioHelp.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/DynamicClothingControl/DynamicClothingControl.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/EXPExporter/ExPExporter.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/FBXExporter/FBXExporter.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/FigureSetup/FigureSetup.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/JointEditor/JointEditor.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/LAMH Player/LAMH Player.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/LayeredImageEditor/LayeredImageEditor.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/Luxus/Luxus.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/MorphLoader/MorphLoader.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/MorphLoaderPro/MorphLoaderPro.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/PolygonGroupEditor/PolygonGroupEditor.dsx
Reading help file J:/program Files/DAZ 3D/DAZStudio4/docs/Plugins/TextureAtlas/TextureAtlas.dsx
Take a look at this post.
-Rob
Ok did exactly that and tried starting Daz Studio, I am STILL waiting....
And still nothing happens when I try to start DS, I have to force terminate the program because it does nothing, even after tirning off then on the CMS and then turning on the DLM...... This is starting to make me a bit more than irritated to be honest.
My log then continues
Reading help file C:/Program Files/DAZ 3D/DAZStudio4/docs/Plugins/WeightMapBrush/WeightMapBrush.dsx
Reading help file C:/Program Files/DAZ 3D/DAZStudio4/docs/inlinehelp.dsx
Scanning import folders
Scanning content folders
Using GLEW 1.9.0
Supported OpenGL extensions:
so the next few steps are to scan the content directories and then to get the OpenGL features. Although it's a couple of steps on from the last actions written it may be worth checking fro video driver updates.
If you stop the CMS service (without restarting it) and then launch DAZ Studio, do you experience the same thing?
Are you running anti-virus software and/or a software firewall?
-Rob
Yes same thing. And yes I am but it never was a problem before.
Richard, are you wanting me to do something? Your post is not quite clear on that.