Loading...
> >

SciFi Fanart - props, cr2, rigging tutorial

patience55patience55 Posts: 7,006
edited March 2014 in Freebies

There shall be [we hope] many parts ... and then I'll repack them into a .cr2 file so people can have the option for loading the entire set, or just bits 'n pieces.

Part One - Beam with 3 Lights Updated - has new link.

This set is aka The Officers' Lounge which was first made by MBruffy. With his permission I've been remaking it.

The .pp2 files were created in PP2012 and hopefully work in most of the staging programs.
The .duf files were created in D/S4.6.1.33 and hopefully work in D/S4.x

If one mixes 'n matches Poser and D/S files, some minor re-positioning may be required.

Poser_Render.jpg
1301 x 668 - 50K
Lights01-03_for_Beam.jpg
1000 x 1000 - 83K
promo_beam.jpg
1000 x 798 - 33K
Beam_with_3_lights.jpg
1000 x 900 - 132K
Post edited by patience55 on

Comments

  • patience55patience55 Posts: 7,006
    edited March 2014

    And here's part two updated - Ceiling, Ceiling Light Bar and the lights to put on it.
    Updated - has new link.

    Part_Two_with_one.jpg
    1000 x 1000 - 72K
    Post edited by patience55 on
  • patience55patience55 Posts: 7,006
    edited December 1969

    For those wanting the plain geometries - those will all be made available when the .cr2 is released as it uses them ;-)

  • patience55patience55 Posts: 7,006
    edited March 2014

    Don't panic ... in the workflow for creating all these props, I missed that the prop's materials had been renamed by the utility which carried over into the .duf files. Am correcting that and zips will be replaced "s**n" ;-)

    Sometime this weekend the entire set should be available.

    Updates are uploaded - couldn't swap out the zips like the uploader gadget suggests one could so we have new links.

    Post edited by patience55 on
  • patience55patience55 Posts: 7,006
    edited December 1969

    Okay here's "most" of the rest of the props.
    There are 4 zips, all stored in this gallery folder.

    shows_when_rendered.png
    993 x 606 - 83K
    Part_6.png
    1000 x 1000 - 396K
    Part_5.png
    1000 x 1000 - 175K
    Part_4.png
    1000 x 1000 - 577K
    Part_3.png
    1000 x 1000 - 292K
  • patience55patience55 Posts: 7,006
    edited December 1969

    Some promo pics.

    Careful_here_2.png
    1000 x 1000 - 619K
    Careful_here.png
    1000 x 1000 - 639K
    adjust_smoothing_on_ceililng.png
    1000 x 685 - 308K
    As_it_Loads_Poser_files_in_DS.png
    1000 x 961 - 323K
    As_Loads_Poser_files_in_DS.png
    1000 x 899 - 421K
  • patience55patience55 Posts: 7,006
    edited December 1969

    The .pp2 files [hopefully] work in D/S3+ and Poser 7+.
    The .duf files were made in an older D/S4.6, hopefully work in D/S4.5+
    Templates included.
    Some props may require smoothing adjustments and/or minor re-positioning.

    As some are acquiring Poser 10 this month, I've included a couple of "where to find" pics ...

    turn_off_ground_plane.png
    965 x 657 - 260K
    Furniture_Fits.png
    1000 x 963 - 475K
    dont_use_both.png
    1000 x 640 - 170K
    changing_materials.png
    1000 x 381 - 195K
    add_to_library.png
    933 x 489 - 187K
  • patience55patience55 Posts: 7,006
    edited December 1969

    And maybe tomorrow I will find where is hiding the rest of the floor ... I know I made one!

    Our thanks to MBruffy for the original set and permitting this remake and release :-)

    shaders_not_included.png
    1000 x 920 - 683K
    shaders_not_included_2.png
    1000 x 1000 - 1M
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Patience55 said:
    And maybe tomorrow I will find where is hiding the rest of the floor ... I know I made one!

    Our thanks to MBruffy for the original set and permitting this remake and release :-)

    You're welcome.

  • patience55patience55 Posts: 7,006
    edited December 1969

    The seventh [final] part has been uploaded now.

    For those not familiar with my work, no it is not likely to remain available 'forever' ... so if you want it, download it sooner rather than later.

    Part_7.jpg
    1000 x 1000 - 97K
  • patience55patience55 Posts: 7,006
    edited December 1969

    While making a .cr2 file for the entire set, I have also been making some images for a tutorial on how to get a basic legacy rigging set up using D/S4.x. It'll be in .pdf form and uploaded to DA in a .zip so it doesn't start trying to load and open in people's browsers before they even know what's on the page! While I love ComicLife's ease of use for making these, they do tend to be large files.

  • Faeryl WomynFaeryl Womyn Posts: 3,625
    edited December 1969

    Looking forward to the tutorial and great looking lounge

  • patience55patience55 Posts: 7,006
    edited December 1969

    FaerylWomyn said:
    Looking forward to the tutorial and great looking lounge

    Hoping it meets expectations ;-)

    Tutorial for basic legacy rigging for things like this scene set Click Here.

    Lounge .cr2 file Click Here.
    n.b. some parts in Poser are invisible until rendered. sigh ...

    Also in the geometry folder is a readme clarifying exactly which one file must be kept for the .cr2 to work. The rest are all the other parts which eventually made the props. For smaller unit sets, one can import only the geometry they want into Hexagon [or similar] and export out one .obj file to rig in D/S. How to info is in the tutorial.

    And for the most stupendous movie ever made [jk] click here

    LegacyRigging.png
    493 x 639 - 343K
    cr2_ready.jpg
    1000 x 1000 - 55K
Sign In or Register to comment.