Loading...
> >

Pose Fusion for Genesis to Genesis 8 (Commercial)

124

Comments

  • Richard HaseltineRichard Haseltine Posts: 101,032
    dynamo3d said:

    Question:

    Can´t load the script. Logfile says:

    2020-07-07 22:22:09.860 Loading script: D:/DAZ/Connect Content/data/cloud/1_68845/scripts/pose fusion/pose fusion.dse
    2020-07-07 22:22:09.860 Failed to load script: D:/DAZ/Connect Content/data/cloud/1_68845/scripts/pose fusion/pose fusion.dse

    I try other scripts - load normaly.

    Update Metadata helps not.

    Uninstall and re-install even not helps.

    Using DAZ Studio 4.10 Pro

     

    So any suggestions what to try best next?

    Uninstall the Connect version and install using Install Manager or Daz Central, the script appears not to be written to work with Connect.

  • marblemarble Posts: 7,500

    Just bought this to add to my Zev0 collection. Having tried it I notice that the adjustment sliders within the tool panel are very sluggish compared to the same adjustments in the parameters pane (Bend, side to side, etc.). Any idea why or am I missing some trick?

  • Zev0Zev0 Posts: 7,089
    It's as fast as we could get it. We will see what we can do to get it a little less sluggish. Will have to compare with other scripts that have such a feature to see if it's the standard script emulation speed or something specific inside PF causing it.
  • marblemarble Posts: 7,500
    Zev0 said:
    It's as fast as we could get it. We will see what we can do to get it a little less sluggish. Will have to compare with other scripts that have such a feature to see if it's the standard script emulation speed or something specific inside PF causing it.

    Thanks - I hope you can find the cause. I'm no programmer but I would have thought that the adjustments would use the same functions as the parameter sliders? Anyhow I'm thinking this could be a very useful addition to the toolbox.

  • Zev0Zev0 Posts: 7,089
    edited July 2020

    Ok we found the bend slider in the script works faster than the native parameters, the side by side and twist is a bit slower framerate wise. This is due to items being smoothed everytime as adjustment is made. We also compared to other scripts and the result is the same, so this is just how scripts deal with internal sliders. Only solution is to disable smoothing while the script is open, but then you will be looking at pokethrough on items. When figure has no items loaded it is the same.

    Post edited by Zev0 on
  • dynamo3ddynamo3d Posts: 5
    Richard Haseltine said:
    dynamo3d said:

    Question:

    Can´t load the script. Logfile says:

    2020-07-07 22:22:09.860 Loading script: D:/DAZ/Connect Content/data/cloud/1_68845/scripts/pose fusion/pose fusion.dse
    2020-07-07 22:22:09.860 Failed to load script: D:/DAZ/Connect Content/data/cloud/1_68845/scripts/pose fusion/pose fusion.dse

    I try other scripts - load normaly.

    Update Metadata helps not.

    Uninstall and re-install even not helps.

    Using DAZ Studio 4.10 Pro

     

    So any suggestions what to try best next?

    Uninstall the Connect version and install using Install Manager or Daz Central, the script appears not to be written to work with Connect

    Thanks - install with Daz Central also not solve my problem but it´s ok :)

  • GreybroGreybro Posts: 2,502

    Nice tool set. One question/ constructive critic. So, when I create a new pose from fusing two others everything works as expected. On "save" it also saves the expression data. I was surprised by this as the Daz requirement for poses doesn't allow for expression data to be included and in my case I was hoping to save time in saving by not having to drill down to the head and uncheck everything but general. Could that possible be adressed in an update? I realize that my comments are very PA-centric but hopefully I've made some sort of sense with it.

  • Zev0Zev0 Posts: 7,089
    edited July 2020

    Hi. That is why we included a clear expression button if your pose used contained one. Just click that before saving. We didn't force this because there are other sites that allow poses to be saved with expressions and some people would want them saved out that way.

    Capture.JPG
    583 x 883 - 67K
    Post edited by Zev0 on
  • Nick_1939Nick_1939 Posts: 37
    inquire said:

    Hi: I just bought the product yesterday. I'm on a Macintosh, running OS 10.12.6, Sierra. Thought you should know that. OK, this morning I decided to test the product out. I went to Scripts and clicked on Pose Fusion. I got an error message. I'll attach a Screen Shot. I tried several times, clicking on a character or on a character part, such as "Lower Abdomen." Of course, the error message says to check the Log File, so I'll include the relevant part of the Log File, which just basically says that DS failed to load the script.

    Beyond this, I don't know what to do. Hope this will run on a Macintosh. Below, part of the Log File:

     

    2020-04-25 11:46:44.172 Saved image: /Users/s/Desktop/Latest Poser n DAZ Studio Files/Min Joon and Roy_TEST for POSER FUSION.duf.png
    2020-04-25 11:47:05.548 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:05.548 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:11.650 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:11.651 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:18.530 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion Product Support.dsa
    2020-04-25 11:47:18.550 Script executed successfully: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion Product Support.dsa
    2020-04-25 11:50:35.311 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:50:35.311 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse

    Where it says "Script executed successfully," that refers to the Script "Pose Fusion Product Support" page, which brought me here, not to the Pose Fusion product.

     

  • Zev0Zev0 Posts: 7,089

    Thanks..looking into it.

  • Nick_1939Nick_1939 Posts: 37

    Hello! I am receiving this same error message. "An error occurred while reading the file, see the log file for more details" Was/is there a fix for this? I am on a Mac OS 10.11.6 El Captain 

  • Zev0Zev0 Posts: 7,089
    Nick_1939 said:
    inquire said:

    Hi: I just bought the product yesterday. I'm on a Macintosh, running OS 10.12.6, Sierra. Thought you should know that. OK, this morning I decided to test the product out. I went to Scripts and clicked on Pose Fusion. I got an error message. I'll attach a Screen Shot. I tried several times, clicking on a character or on a character part, such as "Lower Abdomen." Of course, the error message says to check the Log File, so I'll include the relevant part of the Log File, which just basically says that DS failed to load the script.

    Beyond this, I don't know what to do. Hope this will run on a Macintosh. Below, part of the Log File:

     

    2020-04-25 11:46:44.172 Saved image: /Users/s/Desktop/Latest Poser n DAZ Studio Files/Min Joon and Roy_TEST for POSER FUSION.duf.png
    2020-04-25 11:47:05.548 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:05.548 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:11.650 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:11.651 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:18.530 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion Product Support.dsa
    2020-04-25 11:47:18.550 Script executed successfully: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion Product Support.dsa
    2020-04-25 11:50:35.311 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:50:35.311 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse

    Where it says "Script executed successfully," that refers to the Script "Pose Fusion Product Support" page, which brought me here, not to the Pose Fusion product.

     

    What version of studio are you running?

  • Nick_1939Nick_1939 Posts: 37

    4.10.0.123. That could be the reason. I'll try using it on 4.12.... the latest but can't IRAY render but I'm able to with 4.10

  • Zev0Zev0 Posts: 7,089
    edited July 2020

    You need 4.12.0.86 minimum. We do not script build off older versions of studio since we do not have them installed. The script will only work in the versions it was built on and higher.

    Post edited by Zev0 on
  • Nick_1939Nick_1939 Posts: 37

    Gotcha! thanks, It works in 4.12.1.118. Just can't render IRAY. Not your issue tho. 

  • inquireinquire Posts: 2,204

    HI, I'm running DAZ Studio 4.12.1.118. My problem is referred to above, so I thought I'd put in the DS version I'm using. I'm on a Macintosh, running OS 10.12.6 (Sierra). Has Pose Fusion Plus been tested on a Macintosh?

  • Zev0Zev0 Posts: 7,089
    edited July 2020

    Yes it was tested on PC and Mac. Send me your logfile please.

     

    Post edited by Zev0 on
  • inquireinquire Posts: 2,204

    Oh, I don't have Pose Fusion Plus yet. I do have Pose Fusion. The Log File would be the one for Pose Fusion which Nick_1939 quotes above:

    Nick_1939 said:
    inquire said:

    Hi: I just bought the product yesterday. I'm on a Macintosh, running OS 10.12.6, Sierra. Thought you should know that. OK, this morning I decided to test the product out. I went to Scripts and clicked on Pose Fusion. I got an error message. I'll attach a Screen Shot. I tried several times, clicking on a character or on a character part, such as "Lower Abdomen." Of course, the error message says to check the Log File, so I'll include the relevant part of the Log File, which just basically says that DS failed to load the script.

    Beyond this, I don't know what to do. Hope this will run on a Macintosh. Below, part of the Log File:

     

    2020-04-25 11:46:44.172 Saved image: /Users/s/Desktop/Latest Poser n DAZ Studio Files/Min Joon and Roy_TEST for POSER FUSION.duf.png
    2020-04-25 11:47:05.548 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:05.548 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:11.650 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:11.651 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:47:18.530 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion Product Support.dsa
    2020-04-25 11:47:18.550 Script executed successfully: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion Product Support.dsa
    2020-04-25 11:50:35.311 Loading script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse
    2020-04-25 11:50:35.311 Failed to load script: /Users/Shared/My DAZ 3D Library/Scripts/Pose Fusion/Pose Fusion.dse

    Where it says "Script executed successfully," that refers to the Script "Pose Fusion Product Support" page, which brought me here, not to the Pose Fusion product.

     

     

  • bernardadjenughurebernardadjenughure Posts: 0

    Hi 

    I bought the bundled deal but the plus version is not showing up.

    How do I resolve this?

    Regards

    Bernard

  • jardinejardine Posts: 1,202

    random compliment:

    when i picked up pose fusion and pose fusion plus, i thought that they might be really useful once in a while.  as a niche tool.

    boy, did i underestimate the value of this tool.  i use it almost every time i pose a figure, these days.  and i'm still regularly impressed by how intelligently the interface is designed and how deep the capabilities of the script are.  the thing is worth its weight in gold if you're a pose fiend. 

    so thanks!

  • Zev0Zev0 Posts: 7,089
    edited September 2020

    Thanks for the compliment. I'm using it now as we speak lol. Busy remaking some poses I want to use for promos:)

    Post edited by Zev0 on
  • Zev0Zev0 Posts: 7,089
    bernardadjenughure said:

    Hi 

    I bought the bundled deal but the plus version is not showing up.

    How do I resolve this?

    Regards

    Bernard

    Hi. What script are you using? I need a bit more info.

  • brent_86bde516d4brent_86bde516d4 Posts: 9

    Hi,

    When I try to use Pose Fusion Plus on a Genesis 8.1F I get a message that basically says Genesis 8.1 is not supported although it is listed as supported on the product page. Am I missing something, or will Pose Fusion Plus be updated  to work with Genesis 8.1?

  • Zev0Zev0 Posts: 7,089

    Hmmm we did not make it 8.1 compatible yet. Looks like the store page auto added 8.1 support. We will address this. Thanks. The update hasn't gone live yet.

  • charlescharles Posts: 847

    Hi, I need this working for 8.1, I use it A LOT! Thanks!

     

  • Zev0Zev0 Posts: 7,089
    edited February 2021

    Here is the updated script. Just overwrite the old one. It's the same update thats stuck in q/a at the moment.

    zip
    zip
    Pose Fusion.zip
    50K
    Post edited by Zev0 on
  • ChoppskiChoppski Posts: 509

    HI, will this or the plus work with DS 4.10?

  • Zev0Zev0 Posts: 7,089
    edited April 2021

    No. Think 4.12.0.86 is lowest.

    Post edited by Zev0 on
  • Zev0Zev0 Posts: 7,089

    Latest version - 1.4

    Pose Fusion 1.4 Update Improved some MacOS GUI issues. Fixed issue where script would not be added to Scripts menu in rare cases.

     

  • leo04leo04 Posts: 336
    edited December 2022

    This is for Pose Fusion and Pose Fusion Plus.

    I don't get a dialog or anything when I load this, just a sound indicating some kind of error or incorrect input.

    I have to hit the ESC key to get out of it and continue working.

    What is happening and what can I do to correct the issue?

    This happens with both items.

    Thanks.

    Post edited by leo04 on
Sign In or Register to comment.