Loading...
> >

Majestic GT - Wow, a British Sportscar

2»

Comments

  • MoreTNMoreTN Posts: 302

    Majestic GT $2.99 for a day. Bought. Now what am I going to render with it? Not sure, but now I need to buy a nice looking suit. Oh, and a modern pistol. Oh, and a spy pose set. Oh, and a smart, modern environment. Oh, now I see why they sell us stuff for $2.99

  • jakibluejakiblue Posts: 7,281

    well the Majestic GT turned up in the PC for a day for only $2.99 for those who have it in their wishlist:

    https://www.daz3d.com/majestic-gt

  • 3dLux3dLux Posts: 1,231
    edited April 2021

    MoreTN said:

    Majestic GT $2.99 for a day. Bought. Now what am I going to render with it? Not sure, but now I need to buy a nice looking suit. Oh, and a modern pistol. Oh, and a spy pose set. Oh, and a smart, modern environment. Oh, now I see why they sell us stuff for $2.99

    Protozoon has a great white tie and tails set.  The store may be borked so I get an Oops when I try to look for it so here's a link to his dA: https://www.deviantart.com/protozoon75 and the discussion thread on it: https://www.daz3d.com/forums/discussion/436427/prz-white-tie-outfit-for-genesis-8-male/p1

    Also @mal3Imagery has great stuff coming up: [WIP] Two Piece Suit & Winter Attire: https://www.daz3d.com/forums/discussion/459201/wip-two-piece-suit-winter-attire/p1

    Post edited by 3dLux on
  • vwranglervwrangler Posts: 4,901

    3dLux said:

    MoreTN said:

    Majestic GT $2.99 for a day. Bought. Now what am I going to render with it? Not sure, but now I need to buy a nice looking suit. Oh, and a modern pistol. Oh, and a spy pose set. Oh, and a smart, modern environment. Oh, now I see why they sell us stuff for $2.99

    Protozoon has a great white tie and tails set.  The store may be borked so I get an Oops when I try to look for it so here's a link to his dA: https://www.deviantart.com/protozoon75 and the discussion thread on it: https://www.daz3d.com/forums/discussion/436427/prz-white-tie-outfit-for-genesis-8-male/p1

    Also @mal3Imagery has great stuff coming up: [WIP] Two Piece Suit & Winter Attire: https://www.daz3d.com/forums/discussion/459201/wip-two-piece-suit-winter-attire/p1

    The store isn't borked -- not about that, anyway. Protozoon's storefront at Daz seems to be closed, and all products removed. No idea why.

  • 3dLux3dLux Posts: 1,231
    edited April 2021

    vwrangler said:

    3dLux said:

    MoreTN said:

    Majestic GT $2.99 for a day. Bought. Now what am I going to render with it? Not sure, but now I need to buy a nice looking suit. Oh, and a modern pistol. Oh, and a spy pose set. Oh, and a smart, modern environment. Oh, now I see why they sell us stuff for $2.99

    Protozoon has a great white tie and tails set.  The store may be borked so I get an Oops when I try to look for it so here's a link to his dA: https://www.deviantart.com/protozoon75 and the discussion thread on it: https://www.daz3d.com/forums/discussion/436427/prz-white-tie-outfit-for-genesis-8-male/p1

    Also @mal3Imagery has great stuff coming up: [WIP] Two Piece Suit & Winter Attire: https://www.daz3d.com/forums/discussion/459201/wip-two-piece-suit-winter-attire/p1

    The store isn't borked -- not about that, anyway. Protozoon's storefront at Daz seems to be closed, and all products removed. No idea why.

     

    broken heart  Thanks for the confirmation crying

    He still has 2 items (the only ones I don't have) so I may as well pick them up. surprise

    EDIT:  Even if they show up and can be put into the cart, they're not reflected in the total crying

    Post edited by 3dLux on
  • SevrinSevrin Posts: 6,309

    3dLux said:

    vwrangler said:

    3dLux said:

    MoreTN said:

    Majestic GT $2.99 for a day. Bought. Now what am I going to render with it? Not sure, but now I need to buy a nice looking suit. Oh, and a modern pistol. Oh, and a spy pose set. Oh, and a smart, modern environment. Oh, now I see why they sell us stuff for $2.99

    Protozoon has a great white tie and tails set.  The store may be borked so I get an Oops when I try to look for it so here's a link to his dA: https://www.deviantart.com/protozoon75 and the discussion thread on it: https://www.daz3d.com/forums/discussion/436427/prz-white-tie-outfit-for-genesis-8-male/p1

    Also @mal3Imagery has great stuff coming up: [WIP] Two Piece Suit & Winter Attire: https://www.daz3d.com/forums/discussion/459201/wip-two-piece-suit-winter-attire/p1

    The store isn't borked -- not about that, anyway. Protozoon's storefront at Daz seems to be closed, and all products removed. No idea why.

     

    broken heart  Thanks for the confirmation crying

    He still has 2 items (the only ones I don't have) so I may as well pick them up. surprise

    I only see one, and it's a Daz Original, so not technically his anymore. 

  • 3dLux3dLux Posts: 1,231
    edited April 2021

    Sevrin said:

    3dLux said:

    vwrangler said:

    3dLux said:

    MoreTN said:

    Majestic GT $2.99 for a day. Bought. Now what am I going to render with it? Not sure, but now I need to buy a nice looking suit. Oh, and a modern pistol. Oh, and a spy pose set. Oh, and a smart, modern environment. Oh, now I see why they sell us stuff for $2.99

    Protozoon has a great white tie and tails set.  The store may be borked so I get an Oops when I try to look for it so here's a link to his dA: https://www.deviantart.com/protozoon75 and the discussion thread on it: https://www.daz3d.com/forums/discussion/436427/prz-white-tie-outfit-for-genesis-8-male/p1

    Also @mal3Imagery has great stuff coming up: [WIP] Two Piece Suit & Winter Attire: https://www.daz3d.com/forums/discussion/459201/wip-two-piece-suit-winter-attire/p1

    The store isn't borked -- not about that, anyway. Protozoon's storefront at Daz seems to be closed, and all products removed. No idea why.

     

    broken heart  Thanks for the confirmation crying

    He still has 2 items (the only ones I don't have) so I may as well pick them up. surprise

    I only see one, and it's a Daz Original, so not technically his anymore. 

    The cowbell, right?  The cello and Chinese Ehru still appear for me.  Sent him a message on dA sad

    Post edited by 3dLux on
  • kyoto kidkyoto kid Posts: 41,205
    edited April 2021

    ...sad as I have been hoping to build a complete symphony orchetra. 

    Post edited by kyoto kid on
  • ProtozoonProtozoon Posts: 554

    Hi!

    Just a little rearrangement. Takes only a short while.

    -P-

  • 3dLux3dLux Posts: 1,231

    Protozoon said:

    Hi!

    Just a little rearrangement. Takes only a short while.

    -P-

    WooHoo!  Thanks muchly for the clarification, @Protozoon  laugh  yes  yes

  • FirstBastionFirstBastion Posts: 7,830

    I certainly was planning on getting the fantastic Protozoon Grand Piano,  I hope that re arranging doesn't take too long.

  • HaruchaiHaruchai Posts: 1,977
    edited April 2021

    Sevrin said:

    kyoto kid said:

    As to to turning a LHD car into a RHD one applying - 100% scaling also reverses all the lettering, licence, and instruments which requires more painstaking work in a 2D programme to correct those details if they're going to be visible in the final image.

    It's not all that painstaking.  Took a couple of minutes to change the front and rear licence plates in the samples shown above, and that's only because I had the wrong layer selected at one point.  Licence plates should be localized, anyway, so that's another minute googling a licence plate.  It was the fastest texture editing I've ever done, since it's just copy/paste/flip.  The dashboard instruments would be about the same.

    Point is, doing that little bit of editing oneself is faster than waiting for someone to bring it to market, and provides a wider selection of vehicles.

    Licence plates yes, symmetrical. Other instruments no. I recently UK'd the Limousines by Polish and the dashboards/interior details take a lot more work.

    Post edited by Haruchai on
  • SevrinSevrin Posts: 6,309

    Well, with the Majestic GT, it's excruciating.  The gauges's textures are separate from the rest of the dash and we have to flip the entire image horizontally, which can take hours.  As for the doors, we'd have to turn off limits to open them correctly, which is nearly impossible.

     

    Majestic GT Flipped.jpg
    1920 x 1440 - 1M
  • TorquinoxTorquinox Posts: 3,576

    Sevrin said:

    Well, with the Majestic GT, it's excruciating.  The gauges's textures are separate from the rest of the dash and we have to flip the entire image horizontally, which can take hours.  As for the doors, we'd have to turn off limits to open them correctly, which is nearly impossible.

    Warning: Extreme sarcasm detected. enlightened

  • 3DSaga3DSaga Posts: 434

    I just picked up the Majestic GT. It's the first car I saw on DAZ when I first joined last year (the longest year of my life). I held off getting it because as a newbie, I was a bit overwhelmed with learning basic stuff on DAZ (still am, actually). Yesterday I saw the pose set for it, and I passed because I didn't have the GT... ah well...

  • RSand55RSand55 Posts: 161

    This prop is amazing! And, for $2.99? A no brainer!

    Congrats to the artist, Human.

  • kenmokenmo Posts: 923

    jakiblue said:

    well the Majestic GT turned up in the PC for a day for only $2.99 for those who have it in their wishlist:

    https://www.daz3d.com/majestic-gt

     

    Wow...thanks very much for the headsup. I just nabbed it. Awesome!!!!!

  • HaruchaiHaruchai Posts: 1,977

    Torquinox said:

    Sevrin said:

    Well, with the Majestic GT, it's excruciating.  The gauges's textures are separate from the rest of the dash and we have to flip the entire image horizontally, which can take hours.  As for the doors, we'd have to turn off limits to open them correctly, which is nearly impossible.

    Warning: Extreme sarcasm detected. enlightened

    Oh yeah, I got that, but again the Majestic dashboard image is symetrical so bloody easy. Here is the Long Limousine with dashboard flipped.

    limo_flipped.png
    600 x 338 - 294K
  • TorquinoxTorquinox Posts: 3,576

    Haruchai said:

    Torquinox said:

    Sevrin said:

    Well, with the Majestic GT, it's excruciating.  The gauges's textures are separate from the rest of the dash and we have to flip the entire image horizontally, which can take hours.  As for the doors, we'd have to turn off limits to open them correctly, which is nearly impossible.

    Warning: Extreme sarcasm detected. enlightened

    Oh yeah, I got that, but again the Majestic dashboard image is symetrical so bloody easy. Here is the Long Limousine with dashboard flipped.

    That's a bit more of a problem!

  • FirstBastionFirstBastion Posts: 7,830

    Certainly a nice addition for the garage.

    1stbastionThegarage logo700.jpg
    700 x 298 - 85K
  • Dave SaxhamDave Saxham Posts: 3

    A bit of a work in progress - it had to be done!
     

    AM07a.jpg
    768 x 1024 - 649K
  • NorthOf45NorthOf45 Posts: 5,538

    There was an update to correct the "Majestic Gauges ON" which now works, but you can't turn them off with "Majestic Gauges OFF". I know, I know, set luminance to 0.0, but still...

  • kyoto kidkyoto kid Posts: 41,205

    Dave Saxham said:

    A bit of a work in progress - it had to be done!
     

    ...nice. 

    Did something similar to the old Spy Car years ago.  A little difficult to see so click to expand (3DL image).

     

    Night Angel.jpg
    1200 x 1200 - 819K
  • VenomisbeautyVenomisbeauty Posts: 110
    Dave Saxham said:

    A bit of a work in progress - it had to be done!
     

    Top!
  • EnoughButterEnoughButter Posts: 103

    I just purchased this and have a question:

    Is there a way to access the 'emissive' surfaces, specifically the headlights? I can turn them on, but do not see any part for them in the Scene pane to modfiy/change them. 

    I am trying to use the iRAY matte setting to get emissives to cast onto a shadow catcher, but apparently I need to set the headlight emissives to Matte as well? Or something?

    https://www.daz3d.com/forums/discussion/327516/iray-shadow-catcher-matte-with-emissives

Sign In or Register to comment.