Loading...
> >

A Thank you to the PAs

124

Comments

  • tsroemitsroemi Posts: 2,871

    Lyoness said:

    tsroemi said:

    @Lyoness, thank you so much for the beautiful flannel nightie today, it's my favorite freebie ever!

    haha. ok. you are welcome

    Seriously, no kidding! I LOVE old-style clothing, and this is so detailed even, with those little frills. Adorable!

  • barbultbarbult Posts: 24,777
    edited December 2021

    I'm trying to create a scene with the nightgown, but when I simulate it, it is breaking up, like polygons aren't welded or something. Does anyone else see something like this?

    I fit the nightgown to the base G8F. I applied the two simulation settings in the product. I simulated with G8F still in the default A pose. This is a view of the front yoke area where the trim connects.

    This is before simulation.

    This is after simulation. There is a polygon in the yoke that appears to be connected only on one edge and is loose like a flap. The edge of the lace that should be connected is all jagged and broken looking. I haven't seen any simulation result like this before, and I don't know how to fix it. Is it like a dForce mesh explosion or a fault in the original mesh?

    Nightgown not simulated.jpg
    2000 x 1500 - 2M
    Nightgown simulated.jpg
    2000 x 1500 - 2M
    Post edited by barbult on
  • barbultbarbult Posts: 24,777
    edited December 2021

    Nobody Likes Mornings

    (I used Mesh Grabber to pull the vertices of the loose yoke polygon flap back into position. I ignored the lace separation. It is too small to see here.)

     

    Nightie Necklace Toothpaste.jpg
    2000 x 2600 - 2M
    Post edited by barbult on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,534

     

    granny looks lovely and warm in her flannel 

    that pixel is not actually a fault as she obviously caught it on something, you just darned it for her.cheeky

  • NerevarineNerevarine Posts: 175

    Absolutely lovely gifts, very versatile and I am sure they will come in handy. I think I missed one that I was excited for, but oh well. Generous as always, thank you PAs!

  • LinwellyLinwelly Posts: 5,977
    edited December 2021

    today Oskarson made us a lovely gift: https://www.daz3d.com/aviatrix-for-genesis-81-females

    that's a relly nice and detailed set, I love it

    Post edited by Linwelly on
  • tsroemitsroemi Posts: 2,871
    edited December 2021

    barbult said:

    I'm trying to create a scene with the nightgown, but when I simulate it, it is breaking up, like polygons aren't welded or something. Does anyone else see something like this?

    I fit the nightgown to the base G8F. I applied the two simulation settings in the product. I simulated with G8F still in the default A pose. This is a view of the front yoke area where the trim connects.

    This is before simulation.

    This is after simulation. There is a polygon in the yoke that appears to be connected only on one edge and is loose like a flap. The edge of the lace that should be connected is all jagged and broken looking. I haven't seen any simulation result like this before, and I don't know how to fix it. Is it like a dForce mesh explosion or a fault in the original mesh?

    That's a pity, could one maybe try to hide the lace while simulating? Or maybe @Lyoness will be so nice to give us a clue what's going on?

    Post edited by tsroemi on
  • BradCarstenBradCarsten Posts: 856

    Another top-notch Freebie. Thanks, Oskarsson. That must have taken a long time to make. 

  • barbultbarbult Posts: 24,777
    edited December 2021

    Up Up and Away!

    Sakura Aviatrix.jpg
    2000 x 1500 - 1M
    Post edited by barbult on
  • barbultbarbult Posts: 24,777
    edited December 2021

    Christmas Candy Poses and Props

    I ran into a little trouble with these poses. They apply the pose to G8F in Frame 0, instead of in the timeline frame I have selected. I wonder why.

    Christmas Candy Poses.jpg
    1600 x 2000 - 719K
    Olympia 8 mix Aviatrix Candy Cane_Default Camera.jpg
    2000 x 1500 - 933K
    Post edited by barbult on
  • nicsttnicstt Posts: 11,715

    Appreciate the gifts, thank you to all participants.

  • KCMustangKCMustang Posts: 114

    I would like to thank Daz & our PAs for the awesome gifts too :)

  • caravellecaravelle Posts: 2,489
    edited December 2021

    Again, a big THANK YOU to all PAs (and Daz!) for your wonderful presents, and HAPPY HOLIDAYS!

    Post edited by caravelle on
  • sdorseysdorsey Posts: 88

    Thanks to all the PAs and DAZ for the wonderful gifts! Happy Holidays!

  • Archangel FirewolfArchangel Firewolf Posts: 9

    Thanks to all the PA's and DAZ for all the presents. They're all great!

  • MelanieLMelanieL Posts: 7,470

    Thanks for all the lovely freebies, very generously offered. Merry Christmas and Happy New Year to all!

  • McGyverMcGyver Posts: 7,066
    edited December 2021

    Thank you to all the PAs for all the great holiday gifts this year, your generosity will not be forgotten!

    Egh... that sounded ominous... like something some evil overlord villain might say... "Your generosity... will not be forgotten..."

    I guess you'd have to say that in a British accent and a low gravelly voice... not too Darth Vader, not too Saruman... maybe a little Vodemort... for full effect... 

    If you were trying to sound ominous... which I'm not...

    I'm genuinely appreciative.

    But still... Thank you for all the amazing gifts your hard work and generosity will not be forgotten and you alone shall be spared for your kindness!

    Woah... I don't know where that came from... that definitely didn't sound right...

    I don't even have to say that one out loud to know that sounded ominous...

    I actually was wringing my hands after I wrote that, and cackling madly... It's probably this cursed cloak of foreboding I'm wearing...

    I got it years ago from a little shop on main street that sold monkey paws and other interesting knick-knacks... not Nick Nack, the henchman of the bond villain Scaramanga, but collectible decorations... like monkey paws and other mildly cursed objects.

    I put it in a box years ago and wrote "Never, never, never wear! Evil cursed cloak! Burn ASAP!" all over it, but I guess I never got around to burning it... I'm a bit lazy about stuff like that sometimes... generally I do like burning stuff though.

    I should probably take off this cloak... but it's kind of cold in here and my sweatshirt is all the way across the room...

    Anyway...

    Thank you all for the great gifts!

    Phew... that took some effort to not mess up.

    Oh, and...

    HAPPY HOLIDAYS!!

     

    Post edited by McGyver on
  • IceCrMnIceCrMn Posts: 2,142

    Merry Christmas :)

    Thank you PA's for all the great gifts.

  • radiaradia Posts: 128

    Thank you all - such generosity and creativity!

  • smoke14smoke14 Posts: 261

    Thank you PAs so much for all the wonderful gifts. Your generosity is greatly appreciated. Wishing you all a wonderful Christmas season & a happy and healthy New Year!

  • tsroemitsroemi Posts: 2,871

    Thank you everyone, wishing you all the best!

  • 3Ddreamer3Ddreamer Posts: 1,312

    Thanks PA for the generious gifts and I hope you ahve a great New Year

  • FenixPhoenixFenixPhoenix Posts: 3,114
    edited December 2021

    Thank you to all PAs who've provided wonderful gifts this year! And thank you to all customers for your support this year! Thanks to you we can do what we love. I hope you enjoy our holiday gift this year (we were running out of time so we didn't managed to do anything more elaborate than beauty marks this time around)! Still, we hope it's useful! <3 Happy Holidays!

     

    PS: @Barbult, your renders are so creative! I love them!

    Post edited by FenixPhoenix on
  • HeavyRayHeavyRay Posts: 176

    No renders to show, but wanted to add my "THANKS" to all the artsts who donated goodies.  Very generous of all of you!!!  - Ray

  • xmasrosexmasrose Posts: 1,406

    Thank you all PAs for the generous gifts, @FenixPhoenix I love the beauty marks!

    Happy Holidays!

  • The Blurst of TimesThe Blurst of Times Posts: 2,410

    The PA freebies have been appreciated for sure.

    https://www.daz3d.com/m3d-christmas-knitted-hat-for-genesis 8-and-81-male

    Now I can render some Real Canadians™, eh!

    laugh

  • ArtiniArtini Posts: 9,680
    edited December 2021

    Thanks a lot for the freebies.

    Used below:

    https://www.daz3d.com/lalis-scene--lights-for-iray

    https://www.daz3d.com/fm-glowing-star

    https://www.daz3d.com/ibot-a2

    image

    image

    image

    Capricorn01pic05.jpg
    1200 x 1300 - 305K
    Dwight01pic01.jpg
    1000 x 1200 - 208K
    iBotA2sc01pic01.jpg
    1000 x 1300 - 208K
    Post edited by Artini on
  • NadalinaNadalina Posts: 23

    I am looking forward for these gifts every day. I will miss them when they stop appearing. Thank you so much, wonderful artists!

  • Matari3DMatari3D Posts: 9
    edited December 2021

    Thank you very much for the comments, it really makes me very happy to be able to offer something in gratitude to a community that makes it possible for me to make my passion my profession.
    I hope I can give better gifts next year !!!
    I hope you have a very happy holiday season !!
    Thanks a lot!!!!!smileyheart

    Post edited by Matari3D on
  • barbultbarbult Posts: 24,777
    FenixPhoenix said:

    Thank you to all PAs who've provided wonderful gifts this year! And thank you to all customers for your support this year! Thanks to you we can do what we love. I hope you enjoy our holiday gift this year (we were running out of time so we didn't managed to do anything more elaborate than beauty marks this time around)! Still, we hope it's useful! <3 Happy Holidays!

     

    PS: @Barbult, your renders are so creative! I love them!

    Thanks for the feedback! I've fallen behind on rendering the last several gifts, because I've been sick. I'll try to catch up when I'm feeling better. Don't think I don't appreciate those unrendered items!
Sign In or Register to comment.