Loading...
> >

Ready!- Wall, Door, Knob, Hinges unit, highly morphable

mCasualmCasual Posts: 4,607
edited March 2015 in Freebies

Ready !

here take 1 or 2 :)

https://sites.google.com/site/mcasualsdazscripts5/mcjwalldoor

if you have trouble downloading the zip from my google site ( you gotta click on the little blue arrow )

then here's a direct link to the zip file

https://sites.google.com/site/mcasualsdazscripts5/mcjwalldoor/mcjWallDoor.zip?attredirects=0&d=1
=========


you'll be able to make the walls longer on either side, thicker,

same goes for the frame

and each panel of the door is resizable

there will be 2 other door models

---

i previously posted something similar but there were features i didn't like
that one https://sites.google.com/site/mcasualsdazscripts2/mcjdoor

wallunit.jpg
1280 x 720 - 458K
Post edited by mCasual on

Comments

  • StratDragonStratDragon Posts: 3,168
    edited December 1969

    Casual said:
    you'll be able to make the walls longer on either side, thicker,

    same goes for the frame

    and each panel of the door is resizable

    there will be 2 other door models

    ---

    i previously posted something similar but there were features i didn't like
    that one https://sites.google.com/site/mcasualsdazscripts2/mcjdoor

    all you need is baseboard and ceiling molding and I'll never have to build another interior in Blender ever!
    nice work!

  • mCasualmCasual Posts: 4,607
    edited March 2015

    StratDragon said:

    all you need is baseboard and ceiling molding and I'll never have to build another interior in Blender ever!
    nice work!

    for that, there's the stupendous 71-part mouldings pack right here :)

    https://sites.google.com/site/mcasualsdazscripts3/straightmoldspack

    ( and mcjBuilderA which should be finalized this spring )

    edgy1280.jpg
    1280 x 720 - 81K
    Post edited by mCasual on
  • teriperkins_bfd4324187teriperkins_bfd4324187 Posts: 206
    edited December 1969

    This looks great. Any chance there will be a window/wall version? Thanks for all your hard work.

  • mCasualmCasual Posts: 4,607
    edited December 1969

    Teri 2 said:
    This looks great. Any chance there will be a window/wall version? Thanks for all your hard work.

    well there's the mcjHole but no window yet

    holedemo.png
    600 x 490 - 89K
  • mCasualmCasual Posts: 4,607
    edited December 1969

    for the wall/door-Arch too there will be rounded-corners

    wall.jpg
    1920 x 1440 - 239K
  • mCasualmCasual Posts: 4,607
    edited March 2015

    here you can see that the wall/arches use 5 textures ( per wall face )

    so even if you stretch the wall left/right up and down, using carefull image editing practices you could have patterned wallpapers

    ( or you could us mcjBoxUV to create new UVs after the geometry stretching is finalized )

    bottomup.jpg
    1920 x 1440 - 863K
    aki2.jpg
    1920 x 1440 - 1M
    aki.jpg
    1920 x 1440 - 1M
    panels.jpg
    1920 x 1440 - 480K
    Post edited by mCasual on
  • mCasualmCasual Posts: 4,607
    edited March 2015

    still got to do wall, frame door, knobs, hinge thickness morphs
    and knob radii

    note that by making the door panels invisible, you could transform the door in a 2x3 panes window

    because everything is adjustable

    fig 5 luckily i caught before publish time the fact that the door panels had inverted normals
    which would make them pitch black when using complex or cartoony shaders
    and invisible in Poser

    repaired.jpg
    800 x 450 - 184K
    bythebeach.jpg
    1280 x 720 - 359K
    nearBlockQ.jpg
    1920 x 1080 - 706K
    inagoogleOrlando.jpg
    1920 x 1080 - 1M
    morphs.jpg
    1164 x 718 - 131K
    Post edited by mCasual on
  • mCasualmCasual Posts: 4,607
    edited December 1969

    Ready !

    here take 1 or 2 :)

    https://sites.google.com/site/mcasualsdazscripts5/mcjwalldoor

    if you have trouble downloading the zip from my google site ( you gotta click on the little blue arrow )

    then here's a direct link to the zip file

    https://sites.google.com/site/mcasualsdazscripts5/mcjwalldoor/mcjWallDoor.zip?attredirects=0&d=1

  • none01ohonenone01ohone Posts: 862
    edited December 1969

    That's a fine looking door there. Nice work and thanks Casual.

  • ChoholeChohole Posts: 33,604
    edited December 1969

    none01ohone said:
    That's a fine looking door there. Nice work and thanks Casual.

    I think he came and borrowed one of our doors, they look just like that

  • mCasualmCasual Posts: 4,607
    edited December 1969

    Teri 2 said:
    This looks great. Any chance there will be a window/wall version? Thanks for all your hard work.

    the window prop will be right here http://www.daz3d.com/forums/discussion/54463/

    and very adjustable

  • VilianVilian Posts: 292
    edited December 1969

    Thankies, your creations are always useful and well done :)

Sign In or Register to comment.