Loading...
> >

Will there be an Autofit update for Genesis 3?

Peter WadePeter Wade Posts: 1,642
edited December 1969 in The Commons

I've read comments in this forum saying that Genesis 3 is a significant change in rigging technology, so is it too different to make Autofit with Genesis 1 and 2 impossible?

Autofit made the transition to Genesis 2 a bit less painful since you could still use the clothes you bought for Genesis 1 and the generation 4 figures. If Genesis 3 is completely incompatible I'm not sure I want to start down this road.

And it's a bit annoying that Daz sprung this on us just after the Callie and Cory in space bundle. If I'd known so many bundles were coming in quick succession I'd have hesitated a bit deciding what to buy. And the Vicky 7 bundles are nice, but neither of them include the morphs and expressions that you really need to make the best use of Vicky 7. I know Daz are out to make as much money as they can, but I seem to remember in the old days of Vicky and Mike 4 you used to get some morphs in the pro bundle.

Comments

  • JimmyC_2009JimmyC_2009 Posts: 8,891
    edited December 1969

    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

  • NadinoNadino Posts: 258
    edited December 1969

    The Genesis 3 Female Starter Essentials is available for download in either you product library or in DIM.
    You may have to search "Genesis 3" for it to appear in DIM by some customer's comments.

    Like Jimmy said, the clone is included with the base figure of the Essentials pack. :)

  • Peter WadePeter Wade Posts: 1,642
    edited December 1969

    JimmyC_2009 said:
    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

    Thank you for this update. I didn't think we were getting this since there is no mention of Autofit in the Vicky 7 product page. I assumed if it was available Daz would be keen to point it out.

    Does this clone also allow fitting of Genesis 1 and Generation 4 and 3 clothing? I have bought some updates to autofit, I think they were necessary for Genesis 2 male to female, or possibly Genesis 1 to Genesis 2, I can't remember which, and one of them added Generation 3 to the list.

  • NadinoNadino Posts: 258
    edited December 1969

    Peter Wade said:
    JimmyC_2009 said:
    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

    Thank you for this update. I didn't think we were getting this since there is no mention of Autofit in the Vicky 7 product page. I assumed if it was available Daz would be keen to point it out.

    Does this clone also allow fitting of Genesis 1 and Generation 4 and 3 clothing? I have bought some updates to autofit, I think they were necessary for Genesis 2 male to female, or possibly Genesis 1 to Genesis 2, I can't remember which, and one of them added Generation 3 to the list.

    The included clone is a Genesis 2 Female (G2F) clone. So clothing from Gen4, G1 and G2M should be first converted to G2F then it can be converted via Auto-Fit to G3F.

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Autofit from G2 to G3 can be done. Some have expressed concern about footwear, but, hair and clothing look to be ok so far. I've not done much, but, the 2 renders below show G3F with G2F items fitted.

    CHEERS!

    G3F_Bkini.jpg
    577 x 750 - 118K
    G3F_01.jpg
    577 x 750 - 194K
  • NadinoNadino Posts: 258
    edited December 1969

    Rogerbee said:
    Autofit from G2 to G3 can be done. Some have expressed concern about footwear, but, hair and clothing look to be ok so far. I've not done much, but, the 2 renders below show G3F with G2F items fitted.

    CHEERS!

    Agree Roger, I have yet to find a pair of shoes that convert nicely lol.
    Kind of used to it by now though (previous generation shoes didn't play nice before)

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Gen4 stuff from other non Daz vendors could get nicely mangled too.

    CHEERS!

  • almahiedraalmahiedra Posts: 1,353
    edited December 1969

    Footware from G2F to G3F.

    boots3.png
    500 x 650 - 213K
    boots.png
    500 x 650 - 190K
  • almahiedraalmahiedra Posts: 1,353
    edited December 1969

    Not perfect. Big toe deform sole, but is not much. Sandal G2F to G3F

    heels.png
    500 x 650 - 314K
  • HavosHavos Posts: 5,404
    edited December 1969

    Peter Wade said:
    JimmyC_2009 said:
    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

    Thank you for this update. I didn't think we were getting this since there is no mention of Autofit in the Vicky 7 product page. I assumed if it was available Daz would be keen to point it out.

    Does this clone also allow fitting of Genesis 1 and Generation 4 and 3 clothing? I have bought some updates to autofit, I think they were necessary for Genesis 2 male to female, or possibly Genesis 1 to Genesis 2, I can't remember which, and one of them added Generation 3 to the list.

    You can make your own clones of Genesis 1, V4, or even Gen 3 shapes for G3F, it requires a few steps, but it is not rocket science.

  • DeeKayDeeKay Posts: 36
    edited June 2015

    Havos said:
    Peter Wade said:
    JimmyC_2009 said:
    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

    Thank you for this update. I didn't think we were getting this since there is no mention of Autofit in the Vicky 7 product page. I assumed if it was available Daz would be keen to point it out.

    Does this clone also allow fitting of Genesis 1 and Generation 4 and 3 clothing? I have bought some updates to autofit, I think they were necessary for Genesis 2 male to female, or possibly Genesis 1 to Genesis 2, I can't remember which, and one of them added Generation 3 to the list.

    You can make your own clones of Genesis 1, V4, or even Gen 3 shapes for G3F, it requires a few steps, but it is not rocket science.

    For a complete newbe could you post a link to how creating a clone is done. I have only just started with daz studio.

    Post edited by DeeKay on
  • HavosHavos Posts: 5,404
    edited December 1969

    DeeKay said:
    Havos said:
    Peter Wade said:
    JimmyC_2009 said:
    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

    Thank you for this update. I didn't think we were getting this since there is no mention of Autofit in the Vicky 7 product page. I assumed if it was available Daz would be keen to point it out.

    Does this clone also allow fitting of Genesis 1 and Generation 4 and 3 clothing? I have bought some updates to autofit, I think they were necessary for Genesis 2 male to female, or possibly Genesis 1 to Genesis 2, I can't remember which, and one of them added Generation 3 to the list.

    You can make your own clones of Genesis 1, V4, or even Gen 3 shapes for G3F, it requires a few steps, but it is not rocket science.

    For a complete newbe could you post a link to how this is done. I have only just started with daz studio

    It is discussed in this thread:

    http://www.daz3d.com/forums/discussion/58108/

    For a complete newbie I might recommend you get comfortable with DS before attempting this, but it just involves various steps using daz studio. No other tools are needed, and you don't have to do any sculpturing, or very advanced stuff like that.

  • DeeKayDeeKay Posts: 36
    edited December 1969

    Havos said:
    DeeKay said:
    Havos said:
    Peter Wade said:
    JimmyC_2009 said:
    When you install Genesis 3 Female Starter Essentials, there is a clone already available in AutoFit for G2 clothing.

    Thank you for this update. I didn't think we were getting this since there is no mention of Autofit in the Vicky 7 product page. I assumed if it was available Daz would be keen to point it out.

    Does this clone also allow fitting of Genesis 1 and Generation 4 and 3 clothing? I have bought some updates to autofit, I think they were necessary for Genesis 2 male to female, or possibly Genesis 1 to Genesis 2, I can't remember which, and one of them added Generation 3 to the list.

    You can make your own clones of Genesis 1, V4, or even Gen 3 shapes for G3F, it requires a few steps, but it is not rocket science.

    For a complete newbe could you post a link to how this is done. I have only just started with daz studio

    It is discussed in this thread:

    http://www.daz3d.com/forums/discussion/58108/

    For a complete newbie I might recommend you get comfortable with DS before attempting this, but it just involves various steps using daz studio. No other tools are needed, and you don't have to do any sculpturing, or very advanced stuff like that.

    Wow! Thanks for the fast response

Sign In or Register to comment.