Loading...
> >

Reproducing a 2d crartoon character in 3d

mechw8mechw8 Posts: 42
in Technical Help (nuts n bolts)

I'm looking to reproduce some famous cartoon characters in Daz, like Francine Smith from "American Dad" and Maddie Fenton from "Danny Fantom". I know about Toon Generations , but I'm not sure how well it would work for me. What would be the easiest way for me to achieve this? I know 2d characters don't always turn out right in 3d, but here's a 3d printed model of Francine, so this is actually what she would look like in 3d. I'm sure it was modeled in Blender or Maya, but I'd like to see if anyone knows a way to do it in Daz.Thanks.

 

png
png
Francine Smith 2.png
42K

Comments

  • Catherine3678abCatherine3678ab Posts: 8,335
    edited September 2022

    Daz is not a modeller.

    Using the existing base characters, one can dial in a great variety of morphs. The more morphs you have in the 'gene pool' - the greater the mixes you can put together to achieve the desired character(s).

    Alternatively one can make a separate figure altogether which requires the model, making the rigging, making a ton of adjustment morphs, etc. Not what I would call the easy way.

    eta: As it's the eyes that are the biggest challenge in getting the toon look, here are a few of the toon females I found in the store search. They have large eyes, the nose and jawlines are not the same as your guide picture. I did notice that the product page indicates the head morphs can be dialed in separately. So those mixed with other morphs [hundreds sold in the store] should give you a good start.

    https://www.daz3d.com/toon-princess-for-genesis-8-female

    https://www.daz3d.com/catara-for-genesis-8-female  

    https://www.daz3d.com/toon-generations-4-essentials-for-genesis-8-females

     

    Post edited by Catherine3678ab on
  • mechw8mechw8 Posts: 42

    Thanks; some of those I've never seen before. Isn't there a way to make the sliders in Daz go beyond their initial settings to acheive that toon body look as well? Like to get that really tiny waist and wide hips that some toon females have like Maddie Fenton?

  • felisfelis Posts: 4,311

    On a morph you can click on the gear icon and turn limits off. But it might not give the result you had expected.

  • 31415926543141592654 Posts: 975

    Trying to match an existing / known figure can be difficult. Just to throw in the option, if you send the figure to Hexagon, you can make your own morphs to help shape it ... this is far easier than starting a figure from scratch, texturing, rigging, etc. If you have not done this before, it can take a little getting used to ... but it is an option.

  • mechw8mechw8 Posts: 42
    edited September 2022

    3141592654 said:

    Trying to match an existing / known figure can be difficult. Just to throw in the option, if you send the figure to Hexagon, you can make your own morphs to help shape it ... this is far easier than starting a figure from scratch, texturing, rigging, etc. If you have not done this before, it can take a little getting used to ... but it is an option.

    I don't know anything about Hexagon, but I do have Blender; I'm still a beginner, but I'm far more comfortable with the basic controls, and there's a alot of support for Blender. Could I do the same thing with Blender?

    Post edited by mechw8 on
  • mechw8mechw8 Posts: 42

    felis said:

    On a morph you can click on the gear icon and turn limits off. But it might not give the result you had expected.

    I'll give it a go; the worst that can happen is it doesn't work. I'll do it on a test model just to experiment and see what happens. Thanks.

  • mechw8mechw8 Posts: 42

    Catherine3678ab said:

    Daz is not a modeller.

    Using the existing base characters, one can dial in a great variety of morphs. The more morphs you have in the 'gene pool' - the greater the mixes you can put together to achieve the desired character(s).

    Alternatively one can make a separate figure altogether which requires the model, making the rigging, making a ton of adjustment morphs, etc. Not what I would call the easy way.

    eta: As it's the eyes that are the biggest challenge in getting the toon look, here are a few of the toon females I found in the store search. They have large eyes, the nose and jawlines are not the same as your guide picture. I did notice that the product page indicates the head morphs can be dialed in separately. So those mixed with other morphs [hundreds sold in the store] should give you a good start.

    https://www.daz3d.com/toon-princess-for-genesis-8-female

    https://www.daz3d.com/catara-for-genesis-8-female  

    https://www.daz3d.com/toon-generations-4-essentials-for-genesis-8-females

     

    If I'm understanding you right, the more chrachters or morphs I have in Daz, the more i can mix and match them to get something totally original?

  • Catherine3678abCatherine3678ab Posts: 8,335
    edited September 2022

    Yes, for your own use. {not to be redistributed free or for sale} {with the standard licenses}

    eta: And in today's sale, if a certain amount is purchased, there is a free morph pack for G8 which includes lips :-)

    https://www.daz3d.com/face-morph-collection-for-the-girl-8

     

    Post edited by Catherine3678ab on
  • pwiecekpwiecek Posts: 1,577

    There are actually 4 Toon Generations

    The original was stand alone and is MUCH less human looking

    Toon Generations 2 was  for Genesis 3

    Toon Generations 3 & 4 are both for Genesis 8

    Before you buy, you should look at both. Clothing should autofit just like any other genesis 8 character. i.e.  beware of extreme garments

  • TheCedizTheCediz Posts: 172

    Alternatively, I know a guy you can find on DeviantArt. He does conversions of 3D models to Genesis base figures for Daz3D. If you have some $ to put into and some time for the wait as he is in quite high demand. The great thing is that most of his conversions are available for free to anyone. 

    Check him out:

    www.deviantart.com/shinteo

     

  • 31415926543141592654 Posts: 975

    mechw8 said:

    I don't know anything about Hexagon, but I do have Blender; I'm still a beginner, but I'm far more comfortable with the basic controls, and there's a alot of support for Blender. Could I do the same thing with Blender?

    I have not done the export / inport with blender, but the same process should work ... send it over, make a morph, send it back.  Hexagon works well with Daz Studio and will automatically make a slider for your morph ... I do not know about blender.

  • robertswwwrobertswww Posts: 790

    @mechw8 Another good Toon character to check out is...
    Toon Girl and Girlish Outfit for Genesis 8 Female(s)
    https://www.daz3d.com/toon-girl-and-girlish-outfit-for-genesis-8-females

    And a good starting point for Francine Smith and Maddie Fenton might be...
    Chibi Girl for Genesis
    https://www.daz3d.com/chibi-girl-for-genesis

  • wsterdanwsterdan Posts: 2,344

    robertswww said:

    @mechw8 Another good Toon character to check out is...
    Toon Girl and Girlish Outfit for Genesis 8 Female(s)
    https://www.daz3d.com/toon-girl-and-girlish-outfit-for-genesis-8-females

    And a good starting point for Francine Smith and Maddie Fenton might be...
    Chibi Girl for Genesis
    https://www.daz3d.com/chibi-girl-for-genesis

    Both good suggestions, but I think a better starting place might be: 

    Toon Mom for Genesis 8 Female

    https://www.daz3d.com/toon-mom-for-genesis-8-female 

    It starts you off iwth a "mom" character with Hartman Hips so outer half-way thre. Plus it's on sale at the moment (not sure how long that will last).

  • mechw8mechw8 Posts: 42

    TheCediz said:

    Alternatively, I know a guy you can find on DeviantArt. He does conversions of 3D models to Genesis base figures for Daz3D. If you have some $ to put into and some time for the wait as he is in quite high demand. The great thing is that most of his conversions are available for free to anyone. 

    Check him out:

    www.deviantart.com/shinteo

     

    Yes, I have talked to Shinteo. He uses 3d Wrap to do his conversions. He has a YouTube video on it. Thanks.

  • mechw8mechw8 Posts: 42

    Thanks for your help everone.

  • tomascolt12tomascolt12 Posts: 15

    hello I'm working on recreating Francine Smith but not really toon is there any dresses that match hers from the show?

Sign In or Register to comment.