"Medieval Guillotine"? Really?

2»

Comments

  • McGyver said:

    Actually, it's original name was "The De-Headifier 2000", but before that it was originally designed to trim ponytails (which were very popular at the time)... Unfortunately it proved to be rather bad at only trimming the hair... after several attempts to reconfigure it they realized it was only good at cutting off heads, at which point they gave it the aforementioned moniker... it was then entered in a state run contest for ethical head removal devices where its virtues shone like a decapitated bald head in the midday sun... while it seems a bit naive now, it was very ethical at the time because the belief was that if you removed a head cleanly, it could grow back more enlightened and less stabby and crimey or what the reason you were chopping off the head in the first place. Sadly, in the entire history of the guillotine hardly any heads grew back, and its unknown if any that did were more enlightened than the original.

    That's what I heard. 

  • CybersoxCybersox Posts: 9,053

    Let's face it, very little in the DAZ store has much to do with historical accuracy. 

  • kyoto kidkyoto kid Posts: 41,044

    .. I got teh set anyway as could always find uses for it and the other props  The chopping block, gallows, pillory, and pyre are more authentic to the period

  • SimonJMSimonJM Posts: 5,980

    But why doesn't it have high heels?

  • AscaniaAscania Posts: 1,849

    RawArt said:

    how about "Mediaval Style Guillotine"   good enough?

    Not really. As the Halifax Gibbet shows, medieval style looks distinctly different. The one in the store is also far too short.

  • DiomedeDiomede Posts: 15,169
    edited January 20

    I want 'medieval guillotine.'

    I am searching all over the store for the (not historically accurate, Oh My!) prop named Medieval Guillotine.  I must add it to my guillotine collection!  Really.  I have more than one 3D public execution prop.  When I worked in DC, I got to witness first hand the symbolic public execution of quite a few public figures.  It is a fun hobby with my former colleagues to predict where some famous person stands in the queue for the allegorical guillotine, and then watch the headlines (head-line, queue, guillotine, get it? ugh).  I am very proud to have selected William Penn for my bingo card.  Cha-ching!  All in the spirit of nerdy fun among over-educated librarians.  

    Has the name of the prop been changed?  Is it one of these?  (I already have them both)

    https://www.daz3d.com/the-guillotine

    https://www.daz3d.com/la-guillotine

    With the store on sale, I must know now if there are any guillotines missing from my collection, historically inaccurate though they might be!

    Post edited by Diomede on
  • ColinFrenchColinFrench Posts: 647

    SimonJM said:

    But why doesn't it have high heels?

    I suppose it could be used to remove high heels if you very, very carefully positioned the subject wearing them so the blade only chopped off the appropriate bits.

  • Charlie JudgeCharlie Judge Posts: 12,732

    Diomede said:

    I want 'medieval guillotine.'

    I am searching all over the store for the (not historically accurate, Oh My!) prop named Medieval Guillotine.  I must add it to my guillotine collection!  Really.  I have more than one 3D public execution prop.  When I worked in DC, I got to witness first hand the symbolic public execution of quite a few public figures.  It is a fun hobby with my former colleagues to predict where some famous person stands in the queue for the allegorical guillotine, and then watch the headlines (head-line, queue, guillotine, get it? ugh).  I am very proud to have selected William Penn for my bingo card.  Cha-ching!  All in the spirit of nerdy fun among over-educated librarians.  

    Has the name of the prop been changed?  Is it one of these?  (I already have them both)

    https://www.daz3d.com/the-guillotine

    https://www.daz3d.com/la-guillotine

    With the store on sale, I must know now if there are any guillotines missing from my collection, historically inaccurate though they might be!

    It is this:  https://www.daz3d.com/capital-punishment

  • DiomedeDiomede Posts: 15,169
    edited January 20

    Charlie Judge said:

    Diomede said:

    I want 'medieval guillotine.'

    ...

    With the store on sale, I must know now if there are any guillotines missing from my collection, historically inaccurate though they might be!

    It is this:  https://www.daz3d.com/capital-punishment

    Thank you!  Into the cart it goes.  Nice Daz+ price.  yes

    Post edited by Diomede on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,208

    I recently watched a Documentary on Franz Schmidt, Dusseldorf's prolific executioner who wrote a diary about his job.

    not the composer of the same name

    he often says he beheaded so and so as a favour

    because hanging really sucked, being broken on the wheel or hung and quartered was worse

    I think families could pay for the favour

    The guillotine would have been a blessing for those unfortunate to face the full brunt of the law, drowning or immolation certainly were not pleasant ends either.

     

  • Peter WadePeter Wade Posts: 1,623

    It doesn't actually say Medieval in the description but the wood tied together by rope look and the scenery used in the promo is definitely in the Daz Medieval style.

    It looks good to me. You're getting a scaffold, gallows with opening trap door, noose, pillory, chopping block and a pyre for buning witches as well as the guillotine and it has 3Delight shaders as well as Iray, something I always like to see. Just the thing for some of my more sinister medieval fantasy scenes. 

  • TorquinoxTorquinox Posts: 3,320
    edited January 20

    Nomenclature is frequently inaccurate. Doesn't really matter. Shiny new guillotine in store isn't medieval, except in the sense of being sort of barbaric and horrible. Still, it looks good. https://www.daz3d.com/infantry-fighting-vehicle lacks qualities of an infantry fighting vehicle. It would still work fine as an armed drone or robot. That's what it looks like in the promo images.  Daz+ folks even received free remotes. At least one of those could control it.

    Dozens of other examples of things in Daz store that fail in nomenclature or expected function. Yet they're still entertaining, attractive, and useful. No actual complaints.

    If you put the guillotine and the IFV in the cart, the price on them drops. That's kinda cool. Oh, wait! Add the bamboo furniture or the granite shaders and price on all of them drops even more! Can get IFV and guillotine for $2 ea, and 3rd item for similar discount. Guess I'm buying something after all!

    Added pricing example.

    Screenshot 2024-01-20 at 09-33-51 Daz 3D.png
    739 x 685 - 105K
    Post edited by Torquinox on
  • PixelSploitingPixelSploiting Posts: 898
    edited January 20

    I like the unmanned light vehicle way more than any other Daz combat robots. This thing might not look very hi-scifi, but it's way more functional. This is how I imagine functional combat robots when I do anything scifi.  It's just the unfortunate naming.

    Post edited by PixelSploiting on
  • McGyverMcGyver Posts: 7,050

    The link for the infantry fighting vehicle appeared on my iPhone split between lines, so I read it as "Infant Fighting Vehicle"...

    That could be cute or sinister depending on one's perspective and imagination.

  • NylonGirlNylonGirl Posts: 1,809

    McGyver said:

    Sadly, in the entire history of the guillotine hardly any heads grew back, and its unknown if any that did were more enlightened than the original.

    They... were not. 

  • MetalSunde94MetalSunde94 Posts: 99
    edited January 22

    "Fun" fact! The late great Sir Christopher Lee witnessed The Last Public Execution By Guillotine in 17 June 1939 in France!
    I think that is crazy to think.

    Source:

    https://www.unilad.com/celebrity/christopher-lee-witnessed-last-public-execution-guillotine-20220622

    Post edited by MetalSunde94 on
  • mwokeemwokee Posts: 1,275

    Does anything around here make sense? You can't find an airplane because when you search on AIRPLANE, actual airplanes do not use that keyword. Try searching on STEAMPUNK and see what comes up that isn't steampunk. To be fair, BatGirl in the 1960's Batman show did wear high heels. The old Batman was actually really bad which is why it was so good. But schlock is usually schlock. Daz products would greatly improve and PA's would make a lot more money if we were able to call out bad products, it's very rare when threads like this don't get deleted.

  • I have to admit I'd never look for an 'Airplane'. I might look for an 'Aeroplane', but that's due to my regional variation in English. What gets me is that looking for a 'Dragon' only gets one hit, SKU 00258, and misses out the Mil Dragon, Dragon 3 and every other dragonling/wyvern etc etc. And all those have the actual word 'Dragon' in the title. I can programme a better search (and have, in a text editor I wrote for myself). It really isn't hard.

    Ah well, it depends on availability of programmer time and desire to invest in it. I will confess there are things I'd prefer to be concentrated upon, but I'm not responsible for juggling those resources.

    @MetalSunde94, I had no idea about Christopher Lee and the execution. It sounds almost bizzare enough to be a Wikipedia invented fact, but there seem to be enough other attributions of sufficient age for it to be a real bizzare fact. Just nuts.

    Regards,

    Richard

  • mwokeemwokee Posts: 1,275

    richardandtracy said:

    I have to admit I'd never look for an 'Airplane'. I might look for an 'Aeroplane', but that's due to my regional variation in English. What gets me is that looking for a 'Dragon' only gets one hit, SKU 00258, and misses out the Mil Dragon, Dragon 3 and every other dragonling/wyvern etc etc. And all those have the actual word 'Dragon' in the title. I can programme a better search (and have, in a text editor I wrote for myself). It really isn't hard.

    I was a data analyst for 16 years. I could show Daz how to increase sales by 10% without them adding a single new product. It frustrates me to no end that simple changes would allow buyers to find existing products. Their only solution for decreasing revenue is to increase prices which causes buyers to purchase even less. A good example is right here, who the heck would ever seach using CAPTIAL PUNISHMENT?

  • nabob21nabob21 Posts: 993

    Torquinox, did you say that your Infantry Fighting Vehicle came with a remote control for it?

  • Charlie JudgeCharlie Judge Posts: 12,732

    nabob21 said:

    Torquinox, did you say that your Infantry Fighting Vehicle came with a remote control for it?

    The Infantry Fighting Vehicle does not come with a remote control. I think Torquinox was refering to the DAZ weekly freebie which was a set of remotes. 

  • TorquinoxTorquinox Posts: 3,320

    Charlie Judge said:

    nabob21 said:

    Torquinox, did you say that your Infantry Fighting Vehicle came with a remote control for it?

    The Infantry Fighting Vehicle does not come with a remote control. I think Torquinox was refering to the DAZ weekly freebie which was a set of remotes. 

    This^

  • StezzaStezza Posts: 8,060

    Three men are sentenced to death by the guillotine.. surprise

    The first man was a priest. The executioner says, “You can go on the guillotine either face up or face down.”

    The priest says, “I want to die face up, looking up to the heavens.”

    So the priest lies face up. The executioner releases the blade; the blade falls rapidly but suddenly stops just 1 inch from the priest’s neck. Given the miracle, the priest is allowed to walk free.

    The next man was an alcoholic. The executioner offers him the same choice, “Do you want to lie facing up or facing down?”

    The alcoholic says, “I want to face up … to remember my glorious drinking days.”

    So the alcoholic lies face up. The executioner releases the blade, and again, it suddenly stops just 1 inch from the man’s neck. Given the miracle, the alcoholic is allowed to walk free.

    Finally, it’s the last man’s turn. He’s an engineer. Once again, the executioner offers him the same choice, “Face up or face down?”

    The engineer scratches his head and says, “Face up I guess.”

    So the engineer lies face up. Just as the executioner is about to release the blade, the engineer starts shouting. “Wait! Wait! I’ve found the problem!”

  • Silent WinterSilent Winter Posts: 3,721
    edited January 23

    ^LMAO laugh

    Post edited by Silent Winter on
  • nabob21nabob21 Posts: 993

    Thanks for the clarification Charlie Judge and Torquinox.

  • MarcCCTxMarcCCTx Posts: 924

    Are there  any poses for this?? I'm having problems getting shoulders correct so the arms line with the holes.

  • felisfelis Posts: 4,320
    edited January 23

    MarcCCTx said:

    Are there  any poses for this?? I'm having problems getting shoulders correct so the arms line with the holes.

     Not that I am aware of.

    I assume you refer to the pillory. A pose wouldn't match if the character has a different hight.

    In my view the key to get it posed is a combination of shoulder and upper arm.

    Pilory_pose.png
    1200 x 1200 - 2M
    Post edited by felis on
  • fixmypcmikefixmypcmike Posts: 19,583

    MarcCCTx said:

    Are there  any poses for this?? I'm having problems getting shoulders correct so the arms line with the holes.

    That's where the chopper comes in -- just remove those recalcitrant body parts. 

Sign In or Register to comment.