Loading...
> >

virtual penny 4 yor carrara thoughts ?

1…6791112…59

Comments

  • wgdjohnwgdjohn Posts: 2,634
    edited June 2016

    Gee... I didn't know that it mattered which way the target help was faceing... I've always thought of it a single point and only used it to point the a Camera at. When would you want to rotate it?

    Post edited by wgdjohn on
  • de3ande3an Posts: 915
    wgdjohn said:

    Gee... I didn't know that it mattered which way the target help was faceing... I've always thought of it a single point and only used it to point the a Camera at. When would you want to rotate it?

    If you use it with the Track modifier you can make other objects track the target's rotation.

  • wgdjohnwgdjohn Posts: 2,634

    Now it makes sense.

  • MistaraMistara Posts: 38,675

    the hot point of camera doesnt seem to point forward from the lens?  sending it to irigin, the lens is on the batting cage floor.

    lightbulb hotpoint is facing out the bottom?

    thinkin to group target helper, camera, and sunlight, so that camera is always seeing the sun (or moon) wherever it is in the sky.,

    or point at sun/moon

  • wgdjohnwgdjohn Posts: 2,634
    edited June 2016
    MistyMist said:

    the hot point of camera doesnt seem to point forward from the lens?  sending it to irigin, the lens is on the batting cage floor.

    lightbulb hotpoint is facing out the bottom?

    For an image showing where it loads and how I think it should load w/settings see http://www.daz3d.com/forums/discussion/comment/1308431/#Comment_1308431. My post before that is similar but sitting on a plane after making additional changes.

    MistyMist said:
    thinkin to group target helper, camera, and sunlight, so that camera is always seeing the sun (or moon) wherever it is in the sky.,

    or point at sun/moon

    If the sun/moon you mention are actual 3d models then you can simply use point at in your camera Modifiers. Both Camera/modifiers Point at and Track point at and track the sun/moon light themselves from what I have been able to do. Using Track Position put the camera into an upside down position, sky at bottom/land at top of screne, and I've not been able to correct it. :(

    Help... Misty lead me down into the dark forsest then ran off... now let's see what direction did we come from.

    Post edited by wgdjohn on
  • MistaraMistara Posts: 38,675
    edited June 2016

    i'm using the sunlight/moonlight from the light types.  testing moving the hotpoint on the light >.<

     

    epically wanting to render like in rara. but with floating fortresses instead of sea ships

     

    this too, yearns

     

    more cores!!!!!!!

    Post edited by Mistara on
  • wgdjohnwgdjohn Posts: 2,634

    Kewl Idea.

  • MistaraMistara Posts: 38,675

    can only see the sun squiggle when light is selected ... well, if cant bring the camera to sun squiggle, bring the squiggle to the camera?

  • MistaraMistara Posts: 38,675
    edited July 2016

    tee hee heeeee

    dust in the wind

     

    cant find the physics demo i was remembering, it showed a ball rolling around like a roller coaster

     

    so this is what puppeteer is  

     

    rofl

     

    ahaa

     

    start at :51

     

     

     

    Post edited by Mistara on
  • MistaraMistara Posts: 38,675

    dreamin  Vray plugin for carrara

    https://www.vray.com/newsletter/learn_vray/

  • FifthElementFifthElement Posts: 569
    MistyMist said:

     

     

    cant find the physics demo i was remembering, it showed a ball rolling around like a roller coaster

    One of my very old Carrara videos have that wink

     

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,202

    I even did a silly try

     

  • MistaraMistara Posts: 38,675

    heartheart luvvv the roller coaster physics!!!!

    was just thinkin, fun idea, like make the track part invisible?

  • MistaraMistara Posts: 38,675

    would like to do render some arch vis stuff like in rara.

    zen of lighting and shadows smiley

    https://www.amazon.com/DOSCH-3D-Building-Interiors-Cinema4D/dp/B0030WOGG4

     

    tee hee - translate klingon 

  • PhilWPhilW Posts: 5,145

    MistyMist - I would venture to say that you can achieve renders like this in Carrara already, and there are a number of ways to achieve it.  My "Realism in Carrara" videos go into detail about how to use Carrara's native render engine to produce very realistic results, including interiors.  Your other choices include Luxrender and Octane, both of which will produce extremely realsitic results (and Octane very fast as well, albeit at a higher cost).

  • MistaraMistara Posts: 38,675

    the lighting in bottom image looks soft

  • DUDUDUDU Posts: 1,945

    Hi Misty !

    Thanks for let me know the video about UV mapping, I made some tests and I can use this very interesting feature now.

    ... and thank you for referencing my video! smiley

  • MistaraMistara Posts: 38,675
    DUDU said:

    Hi Misty !

    Thanks for let me know the video about UV mapping, I made some tests and I can use this very interesting feature now.

    ... and thank you for referencing my video! smiley

     

    which one is it?  smiley
    guessing utoob name is different?

  • DUDUDUDU Posts: 1,945

    Crash !!!

  • MistaraMistara Posts: 38,675
    DUDU said:

    Crash !!!


    Thanks for posting Crash.  collision distance!

  • MistaraMistara Posts: 38,675
    edited July 2016
    Sad said:

    I even did a silly try

     

     

    admiring your water work!

    i know i'se doing it wrong.  i enable the light through transparency in both checkboxes, then have to walk away from my render rig for a week. 

    i'se a fool for the pumped up settings.  and it's prolly unnecessary on so many levels.

    need more cores!!

    Post edited by Mistara on
  • MistaraMistara Posts: 38,675

    oh my gooooodness

    4,500greenbacks for a 12core / 24thread

     

    W7370-387

    Case

    CoolerMaster HAF X Full Tower Chassis

    • IO Panel:
      • USB 3.0 x 2
      • USB 2.0 x 2
      • Audio x 1
      • Mic x 1
      • e-SATA x 1
      • 1394a x 1
    • Dimensions: (W x D x H): 230 x 550 x 590 mm / 9.1 x 21.7 x 23.2 inch
    • Bays: 6 5.25", 5 3.5" (hidden)
    • Fans:
      • Front: 230 x 30 mm red LED on/off
      • Top: 200 x 30 mm fan x 2
      • Side: 200 x 30 mm fan x 1
      • Rear: 140 x 25 mm fan x 1

    Power Supply

    EVGA SuperNOVA NEX650G

    • 650 Watt ATX PS2
    • Rails:
      • 3.3V: 25A
      • 5V: 25A
      • 12V: Split 53A/53A
      • 5Vsb: 3A
      • -12V: .8A
    • Dimensions: 85mm x 150mm x 180mm
    • Efficiency: 90%
    • Warranty: 10 Year, requires EVGA Registration

    Motherboard

    SuperMicro X10DAI Workstation Motherboard

    • Form Factor: EATX (12" x 13")
    • Processors: Dual Intel® Xeon™ model E5 26xx v3 (2011-3)
    • Chipset: Intel® C612
    • Slots:
      • 3 PCI-E 3.0 x16
      • 2 PCI-E 3.0 x8
      • 1 PCI-E 2.0 x4 (in x8)
    • Memory: Up to 512GB ECC (16x 288-pin DDR4 DIMM sockets)
    • SATA: 10x on-board SATA 3.0 (6 Gbps) ports
    • Network: Dual i210 Gigabit Ethernet
    • Audio: HD Audio (Realtek ALC888 with s/PDIF header, Optical S/PDIF)
    • USB 3.0: (6: 4 rear + 2 via header)
    • USB 2.0 (5: 1 2 rear, 2 via header + 1 Type A)
    • Other: TPM 1.2 20-pin header, 2x COM Ports (1 rear, 1 header)

    CPU

    (2) Intel® Xeon™ E5-2650 v4

    • 12-Core
    • 24-thread
    • 2.20 GHz Processor - Socket R3 (LGA2011-3)
    • 30MB Cache
    • 105W

    CPU Cooling Solution

    (2) Gelid Socket 2011 Cooling Solution

    Memory

    32GB DDR4-2133

    • Crucial or Kingston RDIMMs
    • DDR4-2133
    • 8 Modules 4GB
    • ECC Registered Low Voltage (1.2v)

    Video Card (Or Select 'Video-Onboard' to use onboard video)

    EVGA GT730 (01G-P3-2731-KR)b>

    • Specs & Pictures

    • Superclocked
    • Memory: 1024MB, DDR5 64bit
    • GPU Clock Speed: 902MHz
    • Processing Cores: 384
    • Memory Clock Speed: 5000Mhz
    • Memory Bandwidth: 40GB/sec
    • Bus: PCI-E 2.0
    • Interface: DVI-D, HDMI, VGA
    • Concurrent Display: 3 Monitors
    • Resolution Max
      • Digital: 4096x2160
      • Analog: 2048x1536
    • Slots: 2
    • Supports: DirectX 11, Blu-ray 3D
    • Choose Minimum 300 Watt Power Supply

    PCIe SSD

    Item Not Selected

    SSD 1 - 2.5"

    Item Not Selected

    SSD 2 - 2.5"

    Item Not Selected

    Hard Drive 1

    Western Digital Model WD2003FZEX

    • Caviar™ Black Edition
    • 2 Tb SATA 600, 64mb Cache
    • 7200RPM

    Hard Drive 2

    Not Selected

    Professional Video Cards (AutoCad, Solidworks, etc)

    No Professional Video Card Selected

    Primary Optical Drive

    LG Blu-ray Rewriter

    • Max CD Read Speed: 16x
    • Max CD Write Speed: 48x
    • Max CD Rewrite Speed: 24x
    • Max BD Read Speed: 12x
    • Max BD Write Speed: 16x
    • Max BD Rewrite Speed: 12x
    • Max DVD Read Speed: 16x
    • Max DVD Write Speed: 16x
    • Max DVD Rewrite Speed: 8x
    • Optical Media Supported: BD-R/RE
    • Media Layer Supported: Double-layer

    Productivity Software

    Not Selected

    Operating System

    Microsoft Windows 7 Professional 64-bit

    • OEM System Builder Packaging
    • Includes DVD & Key

    LCD Monitor

    No Monitor Selected

    Keyboards

    No Keyboard Selected

    Network Cable, Category 6

    No Network Cable Cable Selected

     

    12-core 4527.JPG
    1099 x 636 - 122K
  • TangoAlphaTangoAlpha Posts: 4,584

    Bung a pair of water cooled Titan-Xs in it (while you can still get them) and it'll render Iray too . . . wink

  • MistaraMistara Posts: 38,675

    i need the cores to render 60fps.  vrooooom vroom

  • wgdjohnwgdjohn Posts: 2,634

    I felt a disturbance in the force... oh yeah... prolly just MistyMist with all dem cores.

  • MistaraMistara Posts: 38,675
    wgdjohn said:

    I felt a disturbance in the force... oh yeah... prolly just MistyMist with all dem cores.

    Let the spice flow - pumpkin spice

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,202

    So beautiful http://www.daz3d.com/wildenlander-watch-hd-for-genesis-3-male-s

    so incompatible with Carrara crying

    I just cry

    I shall buy it

    I shall fight to fit it on G2M and render it in my one true software loves I shall not be defeated

    maybe even rig a polygonal obj exported HD version using the Transfer Utility in DS on the converted original though it ahall grind Carrara to its knees.

    (or at least try running it through Xnormal if it helps)

    Gianni 6 shall wear it Misty and He shall look AWESOME!!!!!!!!!!

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,202
    edited July 2016

    OK need bit of work still may need to use the sheaf as a prop, hid it for  now but SickleYields merge heirachies suggestion in Transfer Utility after converting to triax worked well, cape even has all the g3m facial bones!!!

    1.jpg
    1920 x 1080 - 1M
    Post edited by WendyLuvsCatz on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,202

    click to play

  • MistaraMistara Posts: 38,675

    looks good.

    merge heirarkies, interresting

     

    ise working on this between challenge projects

    want color animate go-for-launch sequence.   sky hammer launcher needs special effects

    trying to remember what millenium falcon animated for launch.

     

    cold beer helps think  lol

Sign In or Register to comment.