Loading...
> >

Linwelly's Grove

1…1920222425…44

Comments

  • LinwellyLinwelly Posts: 5,948
    Mustakettu85 said:
    Linwelly said:

    The beauty of digital art.. there is always the orignal to start something else with.

    Unless you get distracted and save over =P Happened to me a couple of times.

    Luckily i avoided that most of the times, happened to me once with a texture I prepared for a render in Gimp from a DAZ product so I could download that again, but I was a bit panicky then...

    Mustakettu85 said:

     

    Linwelly said:

    Funny thing, you'r kind of preachign to the choir, laugh there are some links to useful armor for females on the front page of my group on dA (well for now its mostly my group, the founder is mostly inactive) http://fightin-females.deviantart.com/

    I was just checking your and your thread visitors' general stance on the topic because I had no idea about your level of involvement either.

    *sighs* For someone whose sole active social network is dA, I navigate it terribly. I managed to locate a number of links but they were either about drawing female anatomy or dead. Did you mean links to 3D stuff or something more generic?

    Speaking of 3D, there is this one in the store here which makes sense in terms of the breastplate: https://www.daz3d.com/joan-of-arc-for-v3

    Xurge has a couple of nice ones in his personal store, like Peacemaker for V4 and some sci-fi ones (not all sadly), but his fantasy ones are, well, very much fantasy save for Fantasy Knight and Battle Mage expansion to a lesser degree.

    I don't know of any other sets =(

    The links from the group are more generic as the group itself is not restricted to 3d stuff.

    I kind of inherited the group, took over as a mod when they asked for help and for the moment I only manage the submissions as time to do that is restricted. So I do need to look up if the links still all work and generate some general activity there. I probably have more time for that next week as I'm off work for some days. There is a Log entry all the way down on the front page that contains a title convincing armor and clothing, after that the links follow.

    I've seen the joan of arc armor as well but for now I'm not in real need and converting and adapting usefully from v3 is a bit a of work so I probabyl would use a make one and adapt it.... well time will tell

  • KnittingmommyKnittingmommy Posts: 8,191
    Linwelly said:

    Thanks a lot Novica, I'm glad you like it! here is some more Ahmad in his djinn form, this time makin a promise : your sweetest nightmare           ( honit soit qui mal i pense)

    as naughty as it goes for my, Iray render with postwork in Gimp

    That is really well done!  I love this!  :)

     

  • Mustakettu85Mustakettu85 Posts: 2,933
    Linwelly said:
    Mustakettu85 said:
    Linwelly said:

    The beauty of digital art.. there is always the orignal to start something else with.

    Unless you get distracted and save over =P Happened to me a couple of times.

    Luckily i avoided that most of the times, happened to me once with a texture I prepared for a render in Gimp from a DAZ product so I could download that again, but I was a bit panicky then...

    Mustakettu85 said:

     

    Linwelly said:

    Funny thing, you'r kind of preachign to the choir, laugh there are some links to useful armor for females on the front page of my group on dA (well for now its mostly my group, the founder is mostly inactive) http://fightin-females.deviantart.com/

    I was just checking your and your thread visitors' general stance on the topic because I had no idea about your level of involvement either.

    *sighs* For someone whose sole active social network is dA, I navigate it terribly. I managed to locate a number of links but they were either about drawing female anatomy or dead. Did you mean links to 3D stuff or something more generic?

    Speaking of 3D, there is this one in the store here which makes sense in terms of the breastplate: https://www.daz3d.com/joan-of-arc-for-v3

    Xurge has a couple of nice ones in his personal store, like Peacemaker for V4 and some sci-fi ones (not all sadly), but his fantasy ones are, well, very much fantasy save for Fantasy Knight and Battle Mage expansion to a lesser degree.

    I don't know of any other sets =(

    The links from the group are more generic as the group itself is not restricted to 3d stuff.

    I kind of inherited the group, took over as a mod when they asked for help and for the moment I only manage the submissions as time to do that is restricted. So I do need to look up if the links still all work and generate some general activity there. I probably have more time for that next week as I'm off work for some days. There is a Log entry all the way down on the front page that contains a title convincing armor and clothing, after that the links follow.

    I've seen the joan of arc armor as well but for now I'm not in real need and converting and adapting usefully from v3 is a bit a of work so I probabyl would use a make one and adapt it.... well time will tell

    Aha, so I guess those were the links I found originally. These don't work anymore:

    Why the shape of breasts in plate armor doesn't work
    Folds & Clothing Tutorial for Women

    In case you ever need to use older armour, what I think is adapting armour from old figures is not that difficult IMO, unless you want it to be a conformer - but why? Armour doesn't bend. So it's possible to just take the obj files apart and parent the right bits to the right body parts, with some scaling.

  • LinwellyLinwelly Posts: 5,948
    Mustakettu85 said:

    Aha, so I guess those were the links I found originally. These don't work anymore:

    Why the shape of breasts in plate armor doesn't work
    Folds & Clothing Tutorial for Women

    In case you ever need to use older armour, what I think is adapting armour from old figures is not that difficult IMO, unless you want it to be a conformer - but why? Armour doesn't bend. So it's possible to just take the obj files apart and parent the right bits to the right body parts, with some scaling.

    Thanks for pointing that out, I hope I get some of that group stuff done, though I'm back struggeling with some stupid flue, so I'm afraid i will spend most of my free time sleeping and the rest doing necessary chores...

  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    Here is my latest entry for Llola Llanes render a month. I call this Dooms edge

    and instead of taking jsut some character I already have I made a new one from scratch, So I made a new skin with SB3 and used the UV swap to put it on an Ekko base, then I diales around a lot ( bit of Ahmad, bit of Leo and a lot of morph dials in general. The marks on his skin are made with a LIE map in the top coat layer as they would have gone lost in the base colour. I will triy to use one of the tricks for lighter skin marks on darker skin I've read about now for the next time. They all sound like something I#d like to try.

    I made the eyes a bit glowy by putting the original Iris colour map into the emissive and add a red tint to it. I like that a lot and I guess I should give that guy some screen time where he's in focus LOL. the eyebrows are Alfreds.

    And as there is a new thread with older sets around, in the background is DMR Lynettes dark rites https://www.daz3d.com/dmr-lynettes-dark-rites

    now here he is

     

     

    Dooms_edge.png
    1414 x 2000 - 4M
    Post edited by Linwelly on
  • Mustakettu85Mustakettu85 Posts: 2,933

    Is the focus really on the blade or are my eyes too tired to see the dude clearly? It's 3AM here...

  • IceDragonArtIceDragonArt Posts: 12,548

    Love the fact that you used DOF to emphasize the sword instead of the camera

     

  • LinwellyLinwelly Posts: 5,948
    Mustakettu85 said:

    Is the focus really on the blade or are my eyes too tired to see the dude clearly? It's 3AM here...

    I know it's unnerving after some time but yes the focus is on the blade as it was to show off the edge of the blade. I'll do one with the focus switched soon ( for my own sanity as well)

     

     

    Ice Dragon Art said:

    Love the fact that you used DOF to emphasize the sword instead of the camera

     

    Thanks Sonja I guess you meant the guy, not the camera.. . must be a side effect of this render ;)

  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    so for everyone who's been thinking of making an appointment with their eye specialist ( ok, I looked up the word, it's ophthalmologist, which would bring me to my ear, nose an throat doctor...)

    here is is Doom ( thats what stas if the focus is off the edge I guess, so he seems to have adopted that name) in all his beauty

     

    Doom.png
    1414 x 2000 - 5M
    Post edited by Linwelly on
  • Mustakettu85Mustakettu85 Posts: 2,933

    Now I see a nice Drow dude. Thanks =D

    I have no knowledge of any characters or products that come after the original Genesis - are these Alfred eyebrows fibermesh or transmapped?

  • IceDragonArtIceDragonArt Posts: 12,548

    Linwelly said:

    Is the focus really on the blade or are my eyes too tired to see the dude clearly? It's 3AM here...

    I know it's unnerving after some time but yes the focus is on the blade as it was to show off the edge of the blade. I'll do one with the focus switched soon ( for my own sanity as well)

     

     

    Love the fact that you used DOF to emphasize the sword instead of the camera

     

    Thanks Sonja I guess you meant the guy, not the camera.. . must be a side effect of this render ;)

    Lol yes, I meant the character not the camera!

  • IceDragonArtIceDragonArt Posts: 12,548

    Gorgeous character!

  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    Thanks Sonja! I believe he will reappear with some more screen time.

    What i used in the abckground of the Doom render was a part form DMR Lynettes dark rites https://www.daz3d.com/dmr-lynettes-dark-rites up there is in iray but I wanted to try around a bit what to make with 3DL. So what I did was 

    1) remove all the original lights and use Marshians reflective radiance

    2) move the flame map into the ambient channel  of the candle flames, give the ambient colour a candle flame tone and dial it up to 200 % and prop a linear point light to every candle flame ( looking at it now i should have turned the surface of the canlde flame to cast shadows off..)

    3) turned the stained glass opacity down (they are almost not see through in the original version, the opacity map is a bit strange) and moved the clour map into the ambient channel of the glass, dial tht up to 100%

    4) give the metalware a polish: turned the DS basic shader from plastic to metal added reflectivity and tinted that and the speculer according to their metall colour. I guess using a real metall shader and then reapplying the bum maps etc would have been the better  result.

    5) the skull is from the monstrous skulls and comes with Iray only shader, I turend that to 3DL with the bone and Nails basic (ctrl doubleclick/ignore to keep the original information intact) from marshians refelctive radiance adjustment shaders

    What I didn't do yet: The set is not gamma correction  friendly as it comes so I let the gamma correction to off for now. Correcting that would lead to a more crisp result I believe. Same goes for displacement. The maps only use the Bump channel, setting up the displacement would make this an extra fine set. I guess I'll get to that later

    So there are a lot of very nicely mader materials, the wood looks like old wood even from close up. And this is just one scene out of the set, there are like 4 or 5 different ready sets, all this for 0.60$, thank you very much DAZ

     

    dark-rites.png
    1000 x 800 - 1M
    Post edited by Linwelly on
  • Richard HaseltineRichard Haseltine Posts: 101,065
    Linwelly said:
    3) turned the stained glass opacity down (they are almost not see through in the original version, the opacity map is a bit strange) and moved the clour map into the ambient channel of the glass, dial tht up to 100%

    Another thing you might try is invert the diffuse colour map and apply that to opacity.

  • LinwellyLinwelly Posts: 5,948
    Richard Haseltine said:
    Linwelly said:
    3) turned the stained glass opacity down (they are almost not see through in the original version, the opacity map is a bit strange) and moved the clour map into the ambient channel of the glass, dial tht up to 100%

    Another thing you might try is invert the diffuse colour map and apply that to opacity.

    Thanks Richard, yes I have done that in some cases as well ...  I don't remember, maybe the one with the castillo del diabolo window?

  • KnittingmommyKnittingmommy Posts: 8,191
    Linwelly said:

    so for everyone who's been thinking of making an appointment with their eye specialist ( ok, I looked up the word, it's ophthalmologist, which would bring me to my ear, nose an throat doctor...)

    here is is Doom ( thats what stas if the focus is off the edge I guess, so he seems to have adopted that name) in all his beauty

     

    Really nice DOF!  I like this one.  Very nicely done.  :)

     

    Linwelly said:

    'snip'

    So there are a lot of very nicely mader materials, the wood looks like old wood even from close up. And this is just one scene out of the set, there are like 4 or 5 different ready sets, all this for 0.60$, thank you very much DAZ

     

    You just had to go there didn't you?  ;)  Very nicely done.  It looks fantastic.  :)  Geesh, I'm really sorry now that I let that one slip away!  :(

  • LinwellyLinwelly Posts: 5,948
    Knittingmommy said:

    Really nice DOF!  I like this one.  Very nicely done.  :)

     

    Linwelly said:

    'snip'

    So there are a lot of very nicely mader materials, the wood looks like old wood even from close up. And this is just one scene out of the set, there are like 4 or 5 different ready sets, all this for 0.60$, thank you very much DAZ

     

    You just had to go there didn't you?  ;)  Very nicely done.  It looks fantastic.  :)  Geesh, I'm really sorry now that I let that one slip away!  :(

    Ah, Sorry Knitting, It wil come back, there is always a second chance.. but did you notice that skull (ducks and runns)

    I#m glad that you like Mr. Doom, He'll came back for more, I'm sure ;)

  • KnittingmommyKnittingmommy Posts: 8,191
    Linwelly said:
    Knittingmommy said:

    Really nice DOF!  I like this one.  Very nicely done.  :)

     

    Linwelly said:

    'snip'

    So there are a lot of very nicely mader materials, the wood looks like old wood even from close up. And this is just one scene out of the set, there are like 4 or 5 different ready sets, all this for 0.60$, thank you very much DAZ

     

    You just had to go there didn't you?  ;)  Very nicely done.  It looks fantastic.  :)  Geesh, I'm really sorry now that I let that one slip away!  :(

    Ah, Sorry Knitting, It wil come back, there is always a second chance.. but did you notice that skull (ducks and runns)

    I#m glad that you like Mr. Doom, He'll came back for more, I'm sure ;)

    lol, yes, I'm sure it will be back.  I'll pick it up at some point.  There's always the next PC Anniversary sale if nothing else.  Yep, that skull was kind of hard to miss.  :)

  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    Ok, I got my first promo ever! This is MY DAY! Thanks to @Marshian for that, its for Marshians Heavy Rain https://www.daz3d.com/heavy-rain-for-3delight-and-iray

    Rainy_Japan.png
    2000 x 1120 - 4M
    Post edited by Linwelly on
  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    and here is George as dragon bath master which is for Sonja! George made ist newly to my runtime, and the rest is foam party by Marshian

     

    Dragon_bubble_bath.png
    2000 x 1600 - 6M
    Post edited by Linwelly on
  • MN-150374MN-150374 Posts: 923
    edited June 2017
    Linwelly said:

    Ok, I got my first promo ever! This is MY DAY! Thanks to @Marshian for that, its for Marshians Heavy Rain https://www.daz3d.com/heavy-rain-for-3delight-and-iray

    Congratulations! Very beautiful image and interesting product!

    Also love the Dragon Bath! Funny scene! Very well done!

    Post edited by MN-150374 on
  • Mustakettu85Mustakettu85 Posts: 2,933
    Linwelly said:

    Ok, I got my first promo ever! This is MY DAY! Thanks to @Marshian for that, its for Marshians Heavy Rain https://www.daz3d.com/heavy-rain-for-3delight-and-iray

    Congrats =) Those leaves with DoF are so cool, and they match her outfit, nice touch!

    ...and just how much time does it take to bathe a dragon?..

  • IceDragonArtIceDragonArt Posts: 12,548

    Congrats on the promo!  Its a gorgeous render!

    And thank you again, I am very touched that you did the dragon!  He is hysterically funny!

  • KnittingmommyKnittingmommy Posts: 8,191

    Oh, congrats on the promo!  So, how was it?  Were you flying high when you saw it in the store?  I'm so glad you got one of your images accepted as a promo.  It looks great.  I'm so happy for you. I just saw that it got posted to Art of the Promo thread, too!  Double kudos.   :)

    Haha, George as a dragon master giving a dragon a bath!  Love that!  :)

  • LinwellyLinwelly Posts: 5,948

    Thanks everybody, I was definitely flying high, and still am, finding the render in the Art of the promo thread was so unexpected on top of everything, that sunday was like birthday when i still was a kid!

    I went and used all that positive energy to get my head wrapped around blender... Found a tutorial that is exactly my style of learning. Feels like the perfect wave right now laughyes

  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    I just noticed I didN#t post this render here yet, so another one with the heavy rain, 3DL, no postwork

    only when it rains

    only_when_it_rains.png
    1500 x 844 - 2M
    Post edited by Linwelly on
  • IceDragonArtIceDragonArt Posts: 12,548
    Linwelly said:

    I just noticed I didN#t post this render here yet, so another one with the heavy rain, 3DL, no postwork

    only when it rains

    I loved this when I saw in the promos and knew right away it was yours.  Very well done!

  • KnittingmommyKnittingmommy Posts: 8,191

    I love the mermaid tail sticking out.  Very nice image!  

  • LinwellyLinwelly Posts: 5,948

    Thank you bot a lot! I got that idea from a render long time ago by conlaod where a mermaid was sitting in a bath tub, the tail hanging out.

     

     

    Ice Dragon Art said:

    I loved this when I saw in the promos and knew right away it was yours.  Very well done!

    this was never in the promos though, I just posted in the PA thread ;)

     

  • LinwellyLinwelly Posts: 5,948
    edited June 2017

    Here is a shoutout to everyone who got their DAZ stuff on a separate HD adn uses the DIM:

    Attention, with the new DIM donload it forgets that you want to save and install you stuff somewhenre else, so you need to establich your own ne path and select that in the DIM details for the products!

    So if you got weird results with products you downloaded after the new DIM, there is why.

     

    On a different note after I finally installed this one https://www.daz3d.com/epic-props-godrays-volumetric-light-for-iray to where it belonged and took a look at the instructions I had the funniest surprise:

    it loads as a prop into the scene:

     

    LOL.png
    500 x 500 - 157K
    Post edited by Linwelly on
Sign In or Register to comment.