Loading...
> >

* Released * Mask Builder II

TotteTotte Posts: 13,955
edited July 24 in Daz PA Commercial Products

Here it is:  https://www.daz3d.com/mask-builder-ii

 

 

 

 

popup1.jpg
1000 x 1300 - 770K
popup4.jpg
1300 x 1000 - 198K
popup5.jpg
1000 x 1300 - 520K
main.jpg
1000 x 1300 - 730K
Post edited by Totte on
«1

Comments

  • DoctorJellybeanDoctorJellybean Posts: 8,463

    Finally!

  • alexhcowleyalexhcowley Posts: 2,386

    Great! Now I can do my medieval village, in a forest.

    Cheers,

    Alex.

  • RandomRandom Posts: 205
    edited July 24

     Is there any distorting mechanism to alter the mask?  Can we design our own "swiggly" masks? Can we scatter some flower or whatever just in the mask area?

    Post edited by Random on
  • TotteTotte Posts: 13,955

    Random said:

     Is there any distorting mechanism to alter the mask?  Can we design our own "swiggly" masks? Can we scatter some flower or whatever just in the mask area?

    The masks are based on a rectangle and a circle, that can be changed, but you can add multiple masks.
    You can use the invert settings either on the mask itself or invert it for the layer in USC2, so for example if you add some makes and set them to minimum level, then set those to the biome you want at a certain place and use the "USC2" mask invert, you get plants where the masks are. 

  • RandomRandom Posts: 205

    Ok. Thanks. That's the flexibility I was looking for.

  • RexRedRexRed Posts: 1,323
    edited July 24

    I love the new Mask Builder II and its real-time features, but I can't figure out if certain things are is possible.

    I can only make circular or square masks, but in the promo images, there are rectangular and oval maps displayed.

    I can see how to make the circular and square maps larger, smaller, raise and lower the opacity and feather, but I cannot figure out if it is possible to move the location of the white part around.

    I would like to be able to create white lines, ovals, rectangles and, in general, "paint" blob layers that I can position in the black area as needed. None of that seems possible.

    And how do I add a height map mask to the landscape from within Mask Builder II?

    Post edited by RexRed on
  • TotteTotte Posts: 13,955

    RexRed said:

    I love the new Mask Builder II and its real-time features, but I can't figure out if certain things are is possible.

    I can only make circular or square masks, but in the promo images, there are rectangular and oval maps displayed.

    I can see how to make the circular and square maps larger, smaller, raise and lower the opacity and feather, but I cannot figure out if it is possible to move the location of the white part around.

    I would like to be able to create white lines, ovals, rectangles and, in general, "paint" blob layers that I can position in the black area as needed. None of that seems possible.

    And how do I add a height map mask to the landscape from within Mask Builder II?

    Resize the masks X/Z , rotade and scale 

  • RexRedRexRed Posts: 1,323

    Totte said:

    RexRed said:

    I love the new Mask Builder II and its real-time features, but I can't figure out if certain things are is possible.

    I can only make circular or square masks, but in the promo images, there are rectangular and oval maps displayed.

    I can see how to make the circular and square maps larger, smaller, raise and lower the opacity and feather, but I cannot figure out if it is possible to move the location of the white part around.

    I would like to be able to create white lines, ovals, rectangles and, in general, "paint" blob layers that I can position in the black area as needed. None of that seems possible.

    And how do I add a height map mask to the landscape from within Mask Builder II?

    Resize the masks X/Z , rotade and scale 

    Oh, that is a great idea! I thought about doing that, I can also stretch the mask to obtain oblong shapes thanks for your help!  

  • RexRedRexRed Posts: 1,323
    edited July 24

    How do I apply a Mask Builder mask (square or circle) to the Ultra Scenery terrrain within Mask Builder?

    I see the square view window for applying a mask on the right side, I just don't know how to apply one to it for height changes.

    How do I make the height parameter slider so it is not grayed out?

    Post edited by RexRed on
  • RexRedRexRed Posts: 1,323

    RexRed said:

    How do I apply a Mask Builder mask (square or circle) to the Ultra Scenery terrrain within Mask Builder?

    I see the square view window for applying a mask on the right side, I just don't know how to apply one to it for height changes.

    How do I make the height parameter slider so it is not grayed out?

    I figured it out, the height works beautifully! 

  • drucdruc Posts: 409

    Instant buy, haven't had a chance to try it yet. Installed and ready to go (I hope). Just working on an indoor scene at the moment. But this will be handy when a window, and outside, is required. 

  • RandomRandom Posts: 205

    Dual purpose for a mask. Use it as intended (inverted or not) and then use UltraScatter on it to add some more vegitation.

  • TotteTotte Posts: 13,955
    edited July 25

    Random said:

    Dual purpose for a mask. Use it as intended (inverted or not) and then use UltraScatter on it to add some more vegitation.

    Indeed - I used Ultrascatter to spread LowPi Heightmarkers then populated the scene with LowPis... based on a mask generated by MaskBuilder II

    the_rally.jpg
    2400 x 1020 - 459K
    Post edited by Totte on
  • RandomRandom Posts: 205

    Neat. Have to try that.

  • MelanieLMelanieL Posts: 7,378

    Quick question: can the masked area be lowered as well as raised? (i.e. can you make a dip in the landscape using the mask?)

  • DoctorJellybeanDoctorJellybean Posts: 8,463

    MelanieL said:

    Quick question: can the masked area be lowered as well as raised? (i.e. can you make a dip in the landscape using the mask?)

    Yes.

  • MelanieLMelanieL Posts: 7,378

    DoctorJellybean said:

    MelanieL said:

    Quick question: can the masked area be lowered as well as raised? (i.e. can you make a dip in the landscape using the mask?)

    Yes.

    Thanks for the info.

    That makes it even more versatile. It's in my cart but I'm waiting a little to see whether anything else grabs me today (e.g. lightning deal) before I hit that pay button.  

  • ArtiniArtini Posts: 9,454

    Totte said:

    Random said:

    Dual purpose for a mask. Use it as intended (inverted or not) and then use UltraScatter on it to add some more vegitation.

    Indeed - I used Ultrascatter to spread LowPi Heightmarkers then populated the scene with LowPis... based on a mask generated by MaskBuilder II

    Great example of placing LowPi folks. Have not thought of such usage, yet.

     

  • echristopherclarkechristopherclark Posts: 248

    I cannot, for the life of me, figure out how to get it to work. Following the instructions but I must be missing something. Is there a video somewhere? All I'm getting when I go into the script is a black square in the mask area with no indication that there's a mask anywhere. 

  • TotteTotte Posts: 13,955
    edited August 19

    echristopherclark said:

    I cannot, for the life of me, figure out how to get it to work. Following the instructions but I must be missing something. Is there a video somewhere? All I'm getting when I go into the script is a black square in the mask area with no indication that there's a mask anywhere. 

    Did you by any chance install it using DazConnect?
    And do you have the C66 Graphics Plugin installed?

    Post edited by Totte on
  • echristopherclarkechristopherclark Posts: 248

    Thanks for the quick reply and apologies for my delayed response. No, I didn't install via DazConnect and yes, I do have the C66 Graphics Plugin installed. Thanks for any additional assistance or suggestions you can provide.

  • TotteTotte Posts: 13,955

    echristopherclark said:

    Thanks for the quick reply and apologies for my delayed response. No, I didn't install via DazConnect and yes, I do have the C66 Graphics Plugin installed. Thanks for any additional assistance or suggestions you can provide.

    Can you provide a screenshot of the window?
     

  • echristopherclarkechristopherclark Posts: 248

    Totte said:

    echristopherclark said:

    Thanks for the quick reply and apologies for my delayed response. No, I didn't install via DazConnect and yes, I do have the C66 Graphics Plugin installed. Thanks for any additional assistance or suggestions you can provide.

    Can you provide a screenshot of the window?
     

    Yes, happy to. I should note that I just tried it on a different machine (I normally work on my PC because of it's NVidia card) and I can make it work if I do "Both," but not if I do "Mask," unless maybe I'm misunderstanding how things work.

    Screenshot 2024-08-19 at 1.14.13 PM.png
    2024 x 1880 - 1M
  • TotteTotte Posts: 13,955

    echristopherclark said:

    Totte said:

    echristopherclark said:

    Thanks for the quick reply and apologies for my delayed response. No, I didn't install via DazConnect and yes, I do have the C66 Graphics Plugin installed. Thanks for any additional assistance or suggestions you can provide.

    Can you provide a screenshot of the window?
     

    Yes, happy to. I should note that I just tried it on a different machine (I normally work on my PC because of it's NVidia card) and I can make it work if I do "Both," but not if I do "Mask," unless maybe I'm misunderstanding how things work.

    That is correct, the title for the "black square" is  Current Custom Heightmap Overlay, and you have no heightmaps set, only mask.

     

  • DoctorJellybeanDoctorJellybean Posts: 8,463

    Quite a large Mask Scale .... 2000%

  • TotteTotte Posts: 13,955

    DoctorJellybean said:

    Quite a large Mask Scale .... 2000%

    Big ground calls for a big mask ;-) 

  • echristopherclarkechristopherclark Posts: 248

    I'm working on a 256 width scene, to explain the 2000% scale. And now, mysteriously, it's working. A few trees appear to peak through in the non-iray preview but when I go to render it looks clean. I have no idea what I did differently today, except to use my Mac instead of my PC.

    test.png
    1000 x 1000 - 3M
  • TotteTotte Posts: 13,955

    Works on both (but developed on Mac). Could be USC2 just didnt decide to update the scene fast enough.

  • echristopherclarkechristopherclark Posts: 248
    edited August 19

    Totte said:

    Works on both (but developed on Mac). Could be USC2 just didnt decide to update the scene fast enough.

    I think the .duf file I was working in got corrupted somehow. I was also seeing some other annoyances (not USC2 or Mask Builder II related). Anyway, I'm starting from scratch and everything's working now. I'll see what happens when I transfer this file back to my PC tonight. But for now: back to the day job!

    Post edited by echristopherclark on
  • DoctorJellybeanDoctorJellybean Posts: 8,463
    edited August 19

    echristopherclark said:

    Totte said:

    Works on both (but developed on Mac). Could be USC2 just didnt decide to update the scene fast enough.

    I think the .duf file I was working in got corrupted somehow. I was also seeing some other annoyances (not USC2 or Mask Builder II related). Anyway, I'm starting from scratch and everything's working now. I'll see what happens when I transfer this file back to my PC tonight. But for now: back to the day job!

    For some using DAZ is a day job! Glad it's working now.

    Post edited by DoctorJellybean on
Sign In or Register to comment.