Loading...
> >

Bend Control for Genesis 3 Females and Males (Commercial)

124

Comments

  • BarubaryBarubary Posts: 1,211
    Cybersox13 said:
    Zev0 said:

    Sigh...Looks like there is no space for Glute Control this month. Pushing for early next month.

    I hate to say it, but that's probably a good thing. My CC could use a break of a week or two after the last two months. 

    Yep, same here. I mean, I would have been willing to skip a meal or two for this, but hey, if I can render AND eat, I'll take it ;D

  • Daywalker DesignsDaywalker Designs Posts: 3,586
    josh.pactor said:

    Out of curiosity, what's this "Tween Julie 7" that I've seen in morph compatibility lists?

    Picture a younger version of Teen Julie for Genesis and you'll probably be pretty close, or a younger version of Teen Josie 7.

  • CybersoxCybersox Posts: 9,058
    josh.pactor said:

    Out of curiosity, what's this "Tween Julie 7" that I've seen in morph compatibility lists?

    A new younger teenage base figure coming out in the near future.  Given the name, she'll probably be fairly similar to YT Julie for Genesis, though my guess is that she'll probably be a bit older in design.    

  • nicsttnicstt Posts: 11,715
    Cybersox13 said:
    josh.pactor said:

    Out of curiosity, what's this "Tween Julie 7" that I've seen in morph compatibility lists?

    A new younger teenage base figure coming out in the near future.  Given the name, she'll probably be fairly similar to YT Julie for Genesis, though my guess is that she'll probably be a bit older in design.    

    and really tall. :p

  • Rod Wise DriggoRod Wise Driggo Posts: 2,211

    No native speaker but does the name not suggest an older one? Teen = 13-19, Tween -> young twenties? I'm anyhow waiting for Belle 7.

  • LeanaLeana Posts: 11,728
    Rod Wise Driggo said:

    No native speaker but does the name not suggest an older one? Teen = 13-19, Tween -> young twenties? I'm anyhow waiting for Belle 7.

    No, tween is younger than teen, think 9-13.

  • EveniosEvenios Posts: 119

    yes the real question has finally been solved.

    will it bend? :-p

  • nicsttnicstt Posts: 11,715

    Finally succumed; I was going to wait until I bought a PC plus again, but figured it would be cheaper in the long run, buying PC plus, always seems to cost me cash for some reason. cheeky

  • kamikaze_lsd_5a50094086kamikaze_lsd_5a50094086 Posts: 9

    Hi, really cool product! I have watched the promo video you posted on Youtube, I have a question, how do you get that fast posing interactivity? It looks like when not posing the mesh, it is in high res then as soon as you start posing it seems like it is temporarily going down to base.

  • Zev0Zev0 Posts: 7,089
    edited May 2016

    Thank you. G3 comes with some pose presets eg like Bend Knee. I used some of those. Otherwise I am just clicking on the area I want bent and adjusting it. Also the figure will snap to base res when ever you are busy posing it and change back to the assigned res when you stop. That is how it normally works.

    Post edited by Zev0 on
  • kamikaze_lsd_5a50094086kamikaze_lsd_5a50094086 Posts: 9
    edited May 2016

    Well G3 comes with some pose presets eg like Bend Knee. I used some of those. Otherwise I am just clicking on the area I want bent and adjusting it. Also the figure will snap to base res when ever you are busy posing it and change back to the assigned res when you stop. That is how it normally works.

    Hmm, mine not behaving like that at all, I load genesis 3, put resolution level to 3 and when I try to pose its laggy as hell but not on subd level 1.

    Maybe its a new feature of 4.9? im still on 4.8 will update later in the week

     

    Post edited by kamikaze_lsd_5a50094086 on
  • Zev0Zev0 Posts: 7,089

    Remember I posed with no textures on. Posing with textures will make it more laggy.

  • kamikaze_lsd_5a50094086kamikaze_lsd_5a50094086 Posts: 9
    Zev0 said:

    Remember I posed with no textures on. Posing with textures will make it more laggy.

    Yeah I know, I did the tests in smooth shaded view still have the problem, thanks for the replies though I will see what happens after I remove 4.8 and install 4.9

     

  • Richard HaseltineRichard Haseltine Posts: 100,963

    Draw Settings pane, in the Manipulation group set SubDivision DrawStyle to Delayed(Off)

  • Zev0Zev0 Posts: 7,089
    edited May 2016

    Ah mine was set at off by default. Probably why it was fast.

    Post edited by Zev0 on
  • kamikaze_lsd_5a50094086kamikaze_lsd_5a50094086 Posts: 9
    edited May 2016

    Draw Settings pane, in the Manipulation group set SubDivision DrawStyle to Delayed(Off)

    Wow! that did the trick, awesome thanks! I dont think I ever touched that, only thing I changed in that pane was selection highlighting. Thanks alot!

    Post edited by kamikaze_lsd_5a50094086 on
  • Zev0Zev0 Posts: 7,089

    There will be a male version of Bend Control.

  • SorelSorel Posts: 1,395
    Zev0 said:

    There will be a male version of Bend Control.

    omg thank you I can't wait :D

  • L'AdairL'Adair Posts: 9,479
    Zev0 said:

    There will be a male version of Bend Control.

    OMG! Doing my happy dance... instant buy here.

  • KnittingmommyKnittingmommy Posts: 8,191
    Zev0 said:

    There will be a male version of Bend Control.

    It will be in my cart first day!! Thank you!!!!

    L'Adair said:
    Zev0 said:

    There will be a male version of Bend Control.

    OMG! Doing my happy dance... instant buy here.

    Happy dancing going on here, too!

  • Serene NightSerene Night Posts: 17,648

    Thanks for the male version. This will be the first version I'll pick up! =-)

  • Zev0Zev0 Posts: 7,089
    edited May 2016

    Some Promos.

    Main.jpg
    1000 x 1300 - 688K
    Popup_1.JPG
    1000 x 1300 - 571K
    Popup_2.jpg
    2000 x 1066 - 825K
    Popup_3.jpg
    2000 x 1066 - 796K
    Popup_6.jpg
    1000 x 1300 - 384K
    Popup_8.jpg
    1000 x 1300 - 476K
    Popup_9.jpg
    1000 x 1300 - 498K
    Popup_10.jpg
    1000 x 1300 - 534K
    Popup_11.jpg
    1000 x 1300 - 655K
    Post edited by Zev0 on
  • KnittingmommyKnittingmommy Posts: 8,191

    They look really good, Zev0!  I'm excited we're getting these for the guys!

  • L'AdairL'Adair Posts: 9,479
    Knittingmommy said:

    They look really good, Zev0!  I'm excited we're getting these for the guys!

    +1

    smiley heart

  • ErdehelErdehel Posts: 386

    +1 heart

  • L'AdairL'Adair Posts: 9,479

    In my cart immediately. Got the extra 20% one time discount message, so probably won't checkout until after Thursday's new releases have been revealed. But I'm not waiting any longer than that.
    smiley

  • Kev914Kev914 Posts: 1,113
    edited May 2016

    I bought Bend Control for Genesis 3 male. And then I used Daz Connect to install everything that I just bought...at least I think I did. I installed everything in the new panel that appeared new. But I don't recall seeing the Bend Control. Is it available for install using Daz Connect? The product page says that it is. I looked in the Content Library under Products\B but there was no bend control there. So can I assume it wasn't installed if I didn't find it there? I can use the DIM to install it if necessary. But mostly I try to use Daz Conect these days. Thanks.

    It just occurred to me that these are probably morphs/dials so they won't appear in the product list.

    I did find it in the store panel and I installed it there. So maybe I installed it twice. Not sure.

    Post edited by Kev914 on
  • KnittingmommyKnittingmommy Posts: 8,191

    Well, I had already used my 20% discount the day before this came out. However, since I've desparately been wanting this, I bought it anyway!  Can't wait to try it out with one of the guys in my runtime!  So, thanks, Zev0!

  • limitedhatsukoilimitedhatsukoi Posts: 3

    hi zev0, can you also do a shoulder bend or shoulder fix?

  • Zev0Zev0 Posts: 7,089

    I have plans on expanding the series to tackle the upper body. Just need time to get around doing it.

Sign In or Register to comment.