Why Is My Pie Crust Still Frozen Complaint Thread
This discussion has been closed.
Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2024 Daz Productions Inc. All Rights Reserved.
Comments
I need to be out of the house every weekday from 9 to 3:30. I am hoping to get one of my notebooks running. One of the computers is having power issues.
The other computer is having start up issues. It will get to the boot screen and tells me to press F2 to continue. The only keys that seem to do anything are the Caps lock and num lock. No other key seems to do anything.
dunkin donuts? :wub:
wishing for vanilla frosted with sprinkles. it's too far to walk there and there is no bus on Sunday. cries
Dunkin donuts is too far for me to walk to also. Fortunately I have a car, but gas is so darn expensive.
...for the second one, it sounds like it could be a hard drive issue. The same happened when my old HD died. Pressing F2 will take you to the system setup screen where you can view the setup specs. Someone else with more IT savvy than I needs to take it from here.
Morning. Whoa blustery windy under a pale grey sky today. Why are weekends so short and weekdays seem so long?
the hand looks soo huge. mantrid drone-ish
artefact of wide lens I think :)
Haz antique music on the ipod, Cole Porter and Night And Day evokes vague fantasies of ballrooms, sophisticated satin and pinstripe silk, long cigarette holders and pencil moustaches. Wonder if there really was a time like that, or was it all a Hollywood dream?
I'm very interested in the reason.
I'm very interested in the reason.
I live in a group home and that is apparently the rule for group homes in NC. Probably because they want the residents to be active in day programs.
No I can only work days. Actually it is not good for me to do those closings and be finished around three or four in the morning.
No I can only work days. Actually it is not good for me to do those closings and be finished around three or four in the morning.
So much building going on in my street arrgghh noise! I'm happy to get out of there during the day :)
No I can only work days. Actually it is not good for me to do those closings and be finished around three or four in the morning.
So much building going on in my street arrgghh noise! I'm happy to get out of there during the day :)
Least you didn't come off night shift and you're trying to sleep. :)
Well Monday turned out to be pretty boring so far, almost lunchtime and the office is deserted, the pavements outside are empty and even the traffic is thin. Mushy Monday brain craves stimulation maybe. Not going to wish for excitement 'cos sometimes there is too much :)
I am watching football while the tv is on mute. There is the yellow team and then the blue team.
So much building going on in my street arrgghh noise! I'm happy to get out of there during the day :)
Least you didn't come off night shift and you're trying to sleep. :)
I'm sure the builders would work nights if they were allowed to.
Called my brother for a bit today. He thought that nine gb of ram is good enough.
So much building going on in my street arrgghh noise! I'm happy to get out of there during the day :)
Least you didn't come off night shift and you're trying to sleep. :)
I'm sure the builders would work nights if they were allowed to.
But then when would the day walkers sleep? There'd be lots of complainers then.
Complaint...
It's already ridiculous that pubs and nightclubs on a Saturday night are called to the police on noise complaints! Seriously, Saturday night is the party night, always has been. You choose to move houses to one close to a nightclub or pub... Get over it it's Saturday.
Did you know that at the uni I must attend noise complaints. Some people are such bastards, I entered one of the common rooms and ended up in a fight with an idiot that refused to turn down the music who announced that he's a student of law and knows better of the law than a security officer that deals with the law on a nightly basis. Students think they're king sh** sometimes... the next time i saw the idiot away from his friends he totally avoids me like a cat to a dog. Go figure.
Fried Noodles in a cardboard box don't conveniently rhyme with lots, at least I get fed, 'nuff said.
Least you didn't come off night shift and you're trying to sleep. :)
I'm sure the builders would work nights if they were allowed to.
But then when would the day walkers sleep? There'd be lots of complainers then.
Complaint...
It's already ridiculous that pubs and nightclubs on a Saturday night are called to the police on noise complaints! Seriously, Saturday night is the party night, always has been. You choose to move houses to one close to a nightclub or pub... Get over it it's Saturday.
Did you know that at the uni I must attend noise complaints. Some people are such bastards, I entered one of the common rooms and ended up in a fight with an idiot that refused to turn down the music who announced that he's a student of law and knows better of the law than a security officer that deals with the law on a nightly basis. Students think they're king sh** sometimes... the next time i saw the idiot away from his friends he totally avoids me like a cat to a dog. Go figure.
Tough job, must be hard to keep a sense of humour dealing with adolescents whose brains haven't fully matured
Complaint (not really but sort of): Due to family matters (other threads) I must cut my night short. I have things that now must be done early in my day tomorrow. I'll peek in for about a hour at tops.
Sad thing is, they are my age! And prob why they think they can get away with things around me. I stood my ground and made an example out of him. I wasn't gonna let the massing crowd gain the opinion that they can walk over me like that. Fortunately, it seems to have worked, I was rather worked up about it all, just the lack of respect that was shown, not only by the individual I was at disagreement with but also the RA that chose a side. Res Admin should know better than to position themselves on one side of conflict. Especially against security whos job it is to ensure the rules of the campus and the law is followed accordingly.
I just work though it, sometimes p**t off inside but smiling on the outside. (Best I can obviously).
If it happened again, I'd be issuing him with a warning, one which would heavily bring into consideration of his likely hood of studying further with the university. Recently about five of them were expelled on reports of drug use in their rooms. Another security officer caught them with a bong ... Funny cos the user thought it wouldn't be noticed if he put it in his pocket with smoke and all lol ... They were expelled in 12hrs, no warnings.
EDIT: so you know, i'm not officially a 'uni guard', I work for a patrol company, we were contracted with the uni with static guard duties cos the uni guards don't work weekends.
can i have a glass of water?
my feet are warming under the blankie, don't wanna untuck.
my peanut doll is too far to reach. stretchhh. nope, can't reach it.
Here ya go. watta and peanut. Snuggle good, nite.
Hm I forgot the VTC DvD on introducing Maxwell Render on my wishlist. I guess that's gonna have to wait an extra month. Again X3
Hm.... Nope. Digital Tutors doesn't have any videos on Lightwave. I guess I was thinking of XSI ^_^;
.
.
http://www.cmivfx.com/store Isn't much better off. They have one single video. They've got more Cinema4D videos than Max, Maya, and XSI combined o_O (nineteen videos! Maya has like three, Max one, and XSI less than seven)
Hmm... Just for fun D=
Cinema 4D + Indigo.
A boredom reliever essentially and not a serious scene. My attempts to use deformers to make the ship shatter where the tentacles struck it... Didn't work out. Oh well.
Anyway, will be scrapped later if I get a completed version of it finished :XD:
Oh yeah, and the water is WAY too calm. Unnaturally calm. I uh... Well I never addressed that XD
The sky is an JPG image that I used photoshop to convert to a 32bit EXR image, which I loaded as a material in Indigo and applied to a sphere with 1mi in diameter. Because Indigo materials default to white in the viewport I had a standard C4D material with the same image mapped to it to position the texture. I replaced it with the Indigo material when I was ready. I had to reverse the normals on the sphere for it to emit any light though X3
I rigged the tentacles myself X3
Not very difficult... So nothing to be proud of there =(
Navigating the viewport in Lightwave reminds me of trying to navigate in Blender. A lot different than how Cinema navigates. I like being able to (Rotate?) the camera while viewing through it, but I keep doing so while trying to zoom in and stuff X3
Going to take some getting used to :)
Perspective viewport is what you want, make one using the drop down at the top left of each viewport. Use ShadedWireframe while you get used to it (use top left right most drop down) VPR can be sluggish on older graphic adaptors and pointless until surfaces are happening properly. Use a keyboard num pad to switch between views.
Camera view actually moves the camera around, is best to add a null (items -> add -> null) and move it to where you want and hit the little crossbar icon to the top right of a viewport to centre a view on it.
No real need to buy LW training videos to begin with, Newtek have hundreds on their YouTube channel. Rebel Hill makes the best LW vids I reckon, but if you google Lightwave video tutes you will see thousands, mostly free.
Fire up Layout and load some particle emitters and Import an object and make a flock of them fly through the particles, you won't regret it :)
Luck hey :)
Perspective viewport is what you want, make one using the drop down at the top left of each viewport. Use ShadedWireframe while you get used to it (use top left right most drop down) VPR can be sluggish on older graphic adaptors and pointless until surfaces are happening properly. Use a keyboard num pad to switch between views.
Camera view actually moves the camera around, is best to add a null (items -> add -> null) and move it to where you want and hit the little crossbar icon to the top right of a viewport to centre a view on it.
No real need to buy LW training videos to begin with, Newtek have hundreds on their YouTube channel. Rebel Hill makes the best LW vids I reckon, but if you google Lightwave video tutes you will see thousands, mostly free.
Fire up Layout and load some particle emitters and Import an object and make a flock of them fly through the particles, you won't regret it :)
Luck hey :)
Yeah I figured that out ^_^
It's the having to hold multiple keys down to move the camera about that's throwing me off =P
I was using a null object to help move around the scene =3
Wonders what the difference between Layout and Modeler is...
Yeah I figured that out ^_^
It's the having to hold multiple keys down to move the camera about that's throwing me off =P
I was using a null object to help move around the scene =3
Wonders what the difference between Layout and Modeler is...
You use the two interfaces together, in the top right hand corner of each UI you will see a button to send a selection to one or the other. Modeller is where you manipulate polys, Layout is where you manipulate objects, broadly speaking. But each is much more than that, cameras are only accessible in Layout, for example, and points only accessible in modeller :)
Reminds myself to post a link to a video about render settings when I get home, should be soon, a couple of hours or so :)
Complaint: I'm hungry, but I don't know what I feel like eating.