Realistic Renders... NOT!! 12 "And we're back in the room!"

1272830323350

Comments

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    I get the feeling that journey won't end well!

    CHEERS!

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    Michael 4

    signsofleadership-sml.jpg
    1200 x 675 - 63K
  • kyoto kidkyoto kid Posts: 41,213
    edited July 2013

    ...well, you won't see much new stuff from me for a few days as my monitor just croaked. New one should arrive by Wednesday (hopefully).

    Post edited by kyoto kid on
  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    m4 ironman

    ironman1-sml.jpg
    936 x 1200 - 308K
  • BobvanBobvan Posts: 2,652
    edited July 2013

    Kyoto you have the worse puter luck. Hope it all works out..Roger no it don't here is one from the 1st story the rest dont suit this site http://bobvan.deviantart.com/art/Terrace-maids-7-381294750

    9158226678_7f10452fce_c.jpg
    800 x 426 - 264K
    Post edited by Bobvan on
  • BobvanBobvan Posts: 2,652
    edited December 1969
    9158226678_7f10452fce_c.jpg
    1024 x 545 - 364K
  • BobvanBobvan Posts: 2,652
    edited December 1969
    9158226678_7f10452fce_c.jpg
    800 x 426 - 163K
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    MotoTsume said:
    Michael 4

    Pretty cool, did you autofit the uniform?

    Michael 6 can't be far off, how time flies!

    CHEERS!

  • RarethRareth Posts: 1,462
    edited December 1969

    Rogerbee said:
    Rareth said:
    well its not a Lux render,
    this is just messing around with the new Base SS shader in DAZ 4.6

    Looks good,

    How did you get one with the SS shader and how did you set it up?

    CHEERS!

    There is a new base SSS shader that comes with DAZ 4.6 might be a separate download/install in DIM,

    the figure is a combination of M5 and Mr. Hyde.. the Mr. Hyde mats are used for the initial setup,
    I then changed the shader (keeping the textures) to the new subsurface base shader for all skin surfaces (excludeing finger and toe nails, eyes and stuff inside the mouth.

    there are several presets for SSS material type, I set it to skin A then tweaked it from there..

    a PDF manual comes with the shader

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Kyoto Kid said:
    ...well, you won't see much new stuff from me for a few days as my monitor just croaked. New one should arrive by Wednesday (hopefully).

    Oh no!

    It never rains...

    Hope you're back in action soon.

    CHEERS!

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    MotoTsume said:
    m4 ironman

    Pretty cool,

    Where did you get the gear from?

    CHEERS!

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Rareth said:
    Rogerbee said:
    Rareth said:
    well its not a Lux render,
    this is just messing around with the new Base SS shader in DAZ 4.6

    Looks good,

    How did you get one with the SS shader and how did you set it up?

    CHEERS!

    There is a new base SSS shader that comes with DAZ 4.6 might be a separate download/install in DIM,

    the figure is a combination of M5 and Mr. Hyde.. the Mr. Hyde mats are used for the initial setup,
    I then changed the shader (keeping the textures) to the new subsurface base shader for all skin surfaces (excludeing finger and toe nails, eyes and stuff inside the mouth.

    there are several presets for SSS material type, I set it to skin A then tweaked it from there..

    a PDF manual comes with the shader

    Oh, right, I've got that and I read the manual. I set mine to skin too. I didn't really have much to compare it to. Male M3dia will probably do a character that uses it so I'll steal their presets.

    CHEERS!

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Nice stuff as always Bob!

    CHEERS!

  • RarethRareth Posts: 1,462
    edited December 1969

    Rogerbee said:
    Rareth said:
    Rogerbee said:
    Rareth said:
    well its not a Lux render,
    this is just messing around with the new Base SS shader in DAZ 4.6

    Looks good,

    How did you get one with the SS shader and how did you set it up?

    CHEERS!

    There is a new base SSS shader that comes with DAZ 4.6 might be a separate download/install in DIM,

    the figure is a combination of M5 and Mr. Hyde.. the Mr. Hyde mats are used for the initial setup,
    I then changed the shader (keeping the textures) to the new subsurface base shader for all skin surfaces (excludeing finger and toe nails, eyes and stuff inside the mouth.

    there are several presets for SSS material type, I set it to skin A then tweaked it from there..

    a PDF manual comes with the shader

    Oh, right, I've got that and I read the manual. I set mine to skin too. I didn't really have much to compare it to. Male M3dia will probably do a character that uses it so I'll steal their presets.

    CHEERS!

    it does require some tweaking and a lot of test renders.

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Very true,

    I only did what I did as I was curious to see what V6 looked like.

    CHEERS!

  • RarethRareth Posts: 1,462
    edited July 2013

    ok I did some more test renders (not the most flattering camera angle, and I have the HARDEST time getting the eyes to look properly at the camera. )

    here we have the same scene, same shaders/textures, one with the SSS ON the other with the SSS off (based on shader settings.)

    Top picture is SSS ON, bottom is SSS OFF

    base-ssOFF-test.jpg
    1024 x 768 - 335K
    base-ssON-test.jpg
    1024 x 768 - 337K
    Post edited by Rareth on
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    There's definitely a difference. Do you think it's any better than the HSS, UberSurface or Interjection?

    CHEERS!

  • RarethRareth Posts: 1,462
    edited December 1969

    Rogerbee said:

    There's definitely a difference. Do you think it's any better than the HSS, UberSurface or Interjection?

    CHEERS!

    I don't think I've used interjection, and I definitely like this better than HSS as for UberSurface I was never a big fan of it.
    render times do not take a huge hit when using this shader.

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    The Star Trek uniform is available at sharecg and is for Valiant for m4 and courages for V4 so no need to fit.
    the ironman suit for m4 is available here: http://inlitestudio.com/3d/ , and is free.

  • BobvanBobvan Posts: 2,652
    edited July 2013

    A little glossyish on the skin but nice renders Rareth more vore!!!! http://bobvan.deviantart.com/art/Island-336-382019372

    9181993984_397275c_bc7_c.jpg
    800 x 426 - 228K
    Post edited by Bobvan on
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Rareth said:
    Rogerbee said:

    There's definitely a difference. Do you think it's any better than the HSS, UberSurface or Interjection?

    CHEERS!

    I don't think I've used interjection, and I definitely like this better than HSS as for UberSurface I was never a big fan of it.
    render times do not take a huge hit when using this shader.

    I see, I'll have to have more of a go sometime.

    CHEERS!

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    MotoTsume said:
    The Star Trek uniform is available at sharecg and is for Valiant for m4 and courages for V4 so no need to fit.
    the ironman suit for m4 is available here: http://inlitestudio.com/3d/ , and is free.

    Thanks,

    I'll grab that Iron Man suit and have a play. I used to use Starship Crew for MOS Invasion when i wanted anything Trek like.

    CHEERS!

  • BobvanBobvan Posts: 2,652
    edited December 1969
    9179778283_8c1c106ae3_c.jpg
    800 x 426 - 264K
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Rogerbee said:
    MotoTsume said:
    The Star Trek uniform is available at sharecg and is for Valiant for m4 and courages for V4 so no need to fit.
    the ironman suit for m4 is available here: http://inlitestudio.com/3d/ , and is free.

    Thanks,

    I'll grab that Iron Man suit and have a play. I used to use Starship Crew for MOS Invasion when i wanted anything Trek like.

    CHEERS!

    Nice site!

    I grabbed Supes and Spidey too!

    CHEERS!

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Bobvan said:

    Hopefully she has a knife up her skirt and will cut her way out.

    CHEERS!

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    Mila Kunis - using PD-Nina mat and Cd2011 Mila morph he made for me for step4

    mila-pd-nina-mat-sml.jpg
    936 x 1200 - 162K
  • kyoto kidkyoto kid Posts: 41,213
    edited December 1969

    ...well back in business. Arrived yesterday, setup this morning. Looks really good.

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    Here is a second Mila render

    mila-pd-nina-mat2-sml.jpg
    927 x 1200 - 200K
  • Lissa_xyzLissa_xyz Posts: 6,116
    edited July 2013

    Trying to teach myself lighting with latex. The face is horribly unrealistic, need to use a different skin.

    The massive head/facemask is by ChrisT, the corset is from the Roxana Yargowhatever chick, the boots are OTK, and the entire thing is shaded with Fisty's Hardcore latex shaders. The main 'bodysuit' is actually Genesis' body itself textured with a latex shader. Lights: IG Photostudio (backdrop too) and a UE2 sphere. Pose is by Laticis in his Watchers Fall pack (modified to bring the head up).

    Latex_Testing.jpg
    500 x 1000 - 295K
    Post edited by Lissa_xyz on
  • RarethRareth Posts: 1,462
    edited December 1969

    more playing around with SSS shaders
    This is a scene I did previously, I used the !Subsurface Base Shader that was a freebie with DAZ 4.6 on the skin this time around,
    oh and changed the backdrop to something less busy.

    Pinup-Flannel-newSSS.jpg
    1024 x 768 - 320K
This discussion has been closed.