Loading...
> >

Star Trek Builders Thread!

1…2728303233…51

Comments

  • blutobluto Posts: 838
    edited December 1969

    nice work madd , im digging it !! are these going to be for shares after the book is out ?

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    bluto said:
    nice work madd , im digging it !! are these going to be for shares after the book is out ?

    If enough folks are intrested, I'll release the corridor and the computers once I get the corridor sections done.

  • crownlioncrownlion Posts: 117
    edited December 1969

    talk about having a bad day


    link to orc

    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=sixus1media&division_id=0&s=dd&pn=3

    orc from Sixus1

    bad_day.jpg
    1066 x 799 - 318K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Okay, door unit's done. Now I just need to build a piece to go across the end of the corridor. I also cut back on the texture files I was using and went with color from Poser's material room.

    TMP-Corridor-Door-test-WEB.jpg
    900 x 616 - 198K
  • Robert FreiseRobert Freise Posts: 4,444
    edited December 1969

    mdbruffy said:
    bluto said:
    nice work madd , im digging it !! are these going to be for shares after the book is out ?

    If enough folks are intrested, I'll release the corridor and the computers once I get the corridor sections done.

    I'm interested
    Looks good

  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    very interested :)

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Okay, don't know if this will be too big or not, but I couldn't make it any smaller. Here's the finished corridor kit. The first one to PM me gets to kick the tires and take it for a test drive.

    Corridor-lay-out-WEB.jpg
    1125 x 2000 - 195K
  • patience55patience55 Posts: 7,006
    edited December 1969

    HU - think we're all PC again for a few hours.

    http://www.daz3d.com/shop/defiant-for-genesis $1.99

    Required outfit for some of the recently released ST uniforms ;-)

  • rdudarduda Posts: 579
    edited December 1969

    mdbruffy said:
    Okay, door unit's done. Now I just need to build a piece to go across the end of the corridor. I also cut back on the texture files I was using and went with color from Poser's material room.

    Looking Really Awesome!!!

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Rduda said:
    mdbruffy said:
    Okay, door unit's done. Now I just need to build a piece to go across the end of the corridor. I also cut back on the texture files I was using and went with color from Poser's material room.

    Looking Really Awesome!!!

    Thank you. :-)

  • MattymanxMattymanx Posts: 6,905
    edited September 2012

    Since we are on the topic of interiors, I am in the process of converting a corridor set that covers Intrepid Class and Sovereign Class starships. I am still in the process of flipping normals and getting pieces finalized for poserization. The person who made these did a fantastic job. They are already setup so that the lights can be mesh lights for added realism. There are no textures, its all colour. I am not sure how much longer its going to take as I need to go through each piece and make sure all the normals are flipped. Anyways, just wanted to mention this before someone decided to try making their own. Not to discourage someone but I wouldn't want anyone to get extra discouraged by getting part way and then feeling bumed cause someone beat them to it. The modeler already stated in his readme that they can be distributed so if anyone wants to make deck layouts afterwards and distribute them, I know it will be ok. Best part is I did not need to scale anything. Fits perfectly with the DAZ people.

    I also have a quick fix in mind for the Voyager Bridge. I know the doors dont open like they were suppose to and the floor light is flipped but none the less, I may be able to finish it up afterwards. Along with one other Voyager set that has not yet been released! :D

    Post edited by Mattymanx on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    And finally, the purpose for which the corridor model was intended. (It grew a little on me, bu that's okay. I need it for later stories anyway.)

    I'll package up the computers and have them posted on DA soon.

    Comp-Core-with-Corridor-WEB.jpg
    900 x 616 - 190K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    The computers are now posted at my DA Gallery:

    http://mdbruffy.deviantart.com/gallery/#/d5der0m

    1701-Comp-core--WEB.jpg
    936 x 1306 - 195K
  • rdudarduda Posts: 579
    edited December 1969

    mdbruffy said:
    The computers are now posted at my DA Gallery:

    http://mdbruffy.deviantart.com/gallery/#/d5der0m

    THANK YOU!!!

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Rduda said:
    mdbruffy said:
    The computers are now posted at my DA Gallery:

    http://mdbruffy.deviantart.com/gallery/#/d5der0m

    THANK YOU!!!

    You're welcome.

  • rdudarduda Posts: 579
    edited December 1969

    bluto said:
    once again mylochka has come through for me and made my silly little project look wonderfull, but its up to you guys , please tell me if you think it looks ready to share with the rest of the class

    Has Cardasion vest been released yet?

  • wolfgang_1wolfgang_1 Posts: 0
    edited December 1969

    Oh yes.What about the Cardassian Vest

  • rdudarduda Posts: 579
    edited December 1969

    The ReadyRoom For the Enterprise 1701-E is up at:
    http://www.ShareCG.com/v/64506/view/11/Poser/ReadyRoom-E

    Enjoy, and post a render here if you can!!

    RR.jpg
    600 x 500 - 127K
  • mdbruffymdbruffy Posts: 2,345
    edited September 2012

    Rduda said:
    The ReadyRoom For the Enterprise 1701-E is up at:
    http://www.ShareCG.com/v/64506/view/11/Poser/ReadyRoom-E

    Enjoy, and post a render here if you can!!

    Thank you! This will definately get used- and I'll post a pic in few minutes.
    I'm going to ask this , but don't think I'm singling you out- I've seen this in other model files, too.
    What does it mean when one - or several-of the png files is all B&W checker board?

    Madison

    Post edited by mdbruffy on
  • MotoTsumeMotoTsume Posts: 520
    edited December 1969

    thanks RDuda, still waiting on that -STII Bridge :)

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Okay. Here's my render of Rduda's Ready Room. Played with the traqnsparency of the viewport and the fishtank. Rendered with the raytracing turned on for the view port reflections.

    Captain Picard is done with M4 and Wertz's morph- did anyone ever find out what happened to him? The Uniform is DS9 for Valiant.

    Picard,here--WEB._.jpg
    1000 x 636 - 193K
  • patience55patience55 Posts: 7,006
    edited September 2012

    @ mdbruffy The black and white images can be deleted ... I tend to keep one hanging around called "CheckerT" in case Poser has a fit insisting to have such a file [even though it's not going to show when the item finishes loading]. Hexagon loves to create them. Makes one for every mat zone and then some I think.

    .....................

    Post edited by patience55 on
  • patience55patience55 Posts: 7,006
    edited December 1969

    Rduda said:
    The ReadyRoom For the Enterprise 1701-E is up at:
    http://www.ShareCG.com/v/64506/view/11/Poser/ReadyRoom-E

    Enjoy, and post a render here if you can!!

    Thank you!

  • mdbruffymdbruffy Posts: 2,345
    edited September 2012

    Patience55 said:
    @ mdbruffy The black and white images can be deleted ... I tend to keep one hanging around called "CheckerT" in case Poser has a fit insisting to have such a file [even though it's not going to show when the item finishes loading]. Hexagon loves to create them. Makes one for every mat zone and then some I think.

    .....................


    Okay. Just wondered. Thanks.

    Post edited by mdbruffy on
  • patience55patience55 Posts: 7,006
    edited December 1969

    mdbruffy said:
    The computers are now posted at my DA Gallery:

    http://mdbruffy.deviantart.com/gallery/#/d5der0m

    THANK YOU!!!!

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Patience55 said:
    mdbruffy said:
    The computers are now posted at my DA Gallery:

    http://mdbruffy.deviantart.com/gallery/#/d5der0m

    THANK YOU!!!!

    You're welcome. The TMP corridor should be along soon.

  • patience55patience55 Posts: 7,006
    edited September 2012

    Oh good.

    I have been busy working on a few ideas too.

    First there's a free morph [not mine], post is here: http://www.daz3d.com/forums/discussion/6752/P15/#88507 for the D/S4.0 morph
    which I used on Genesis in this render with the Defiant ST uniform by PDSmith.
    http://www.daz3d.com/forums/discussion/187/P615/#76642

    IF one happens to have this item:

    http://www.daz3d.com/shop/carnival-big-tent

    I made for myself so will share a flag texture for its circus flag.
    http://www.mediafire.com/?618gwrw8gsj7bg2

    Please do not circulate or post anywhere said flag texture in general for ST because it is not to specifications for regular flags. I do plan on making a proper set of flags, hopefully this month.

    Any suggestions for colour scheme for re-texturing this tent?

    newworld2.jpg
    600 x 600 - 287K
    newworld.jpg
    600 x 600 - 216K
    Post edited by patience55 on
  • patience55patience55 Posts: 7,006
    edited December 1969

    Some of the images I came across are for items that 'gee wouldn't that be nice to have' but in lacking time and/or skill to 'make everything' [no kidding] for some I've been experimenting with using planes. Any interest for these types of background props?

    Here's one example, not ready to leave home yet but first in line ...

    anidea.jpg
    600 x 600 - 170K
  • patience55patience55 Posts: 7,006
    edited December 1969

    I miss not being able to post 'after' the pictures!

    Okay ... here are a few 'free' items from another company. They all have .obj files BUT some will crash Hexagon. The tree will load but takes it's time. One can then resize, 0/0/0 the position and export out, import into their program and make a prop!

    The bathroom set is what crashing Hexagon over here BUT the textures!!! Those look to be great textures for to make sashes with!


    http://www.cgaxis.com/product-info.php?CGAxis_Models_Volume_2_Bathrooms-pid172.html

    http://www.cgaxis.com/product-info.php?Office_Chair-pid467.html

    http://www.cgaxis.com/product-info.php?Office_Desk-pid466.html

    http://www.cgaxis.com/product-info.php?Butia-Yatay-Palm-Free-pid678.html

  • Robert FreiseRobert Freise Posts: 4,444
    edited December 1969

    Grrr wasn't getting notifications guess that means things are getting back to normal

    Thanks for the new toys

This discussion has been closed.