Loading...
> >

3D Printing Plugin for Daz Studio - GamePrint [Commercial]

1…2729313233

Comments

  • 70xploitation70xploitation Posts: 8
    edited March 2018

    Hi, 

    I sent my daz Character by Gameprint Plug in  But i've no result preview stay blocked " your  model is being processed, this may take Couple of minutes...."

    So i sent my render pic like that to complete my order : 

    Post edited by Chohole on
  • 70xploitation70xploitation Posts: 8
    edited March 2018
    70xploitation said:

    This Nzinga The Queen Amazon From Conan The Barbarian 

     

    Hi, 

    I sent my daz Character by Gameprint Plug in  But i've no result preview stay blocked " your  model is being processed, this may take Couple of minutes...."

    So i sent my render pic like that to complete my order : 

     

    Post edited by Chohole on
  • GamePrintGamePrint Posts: 539
    AntMan said:

    WOW, just got my model back. I felt kinda bad giving you one of my more complex models but you hit a homerun!!! Can't say enough about how cool this was to open up and see the real deal. 

    Hey Antman, we are always up for a challenging model. Don't feel bad! Glad you like it!

  • wsterdanwsterdan Posts: 2,379
    AntMan said:

    WOW, just got my model back. I felt kinda bad giving you one of my more complex models but you hit a homerun!!! Can't say enough about how cool this was to open up and see the real deal. 

    Very, very impresive. Like you, they do very good work. wink

    -- Walt

  • GamePrintGamePrint Posts: 539
    wsterdan said:
    AntMan said:

    WOW, just got my model back. I felt kinda bad giving you one of my more complex models but you hit a homerun!!! Can't say enough about how cool this was to open up and see the real deal. 

    Very, very impresive. Like you, they do very good work. wink

    -- Walt

    Thanks Walt!

  • GamePrintGamePrint Posts: 539
    70xploitation said:

    Hi, 

    I sent my daz Character by Gameprint Plug in  But i've no result preview stay blocked " your  model is being processed, this may take Couple of minutes...."

    So i sent my render pic like that to complete my order : 

    Thanks for sending us in your order.

    Could you DM us the email associated with you order, and we will review it?

     

  • GamePrintGamePrint Posts: 539

    If you print at home, show us your prints! 

    https://daz3d.gameprint.net/​

     

  • GamePrintGamePrint Posts: 539

    If you could pick any Daz Character for a collectible, which one would one would you pick?

  • SimonJMSimonJM Posts: 5,997
    GamePrint said:

    If you could pick any Daz Character for a collectible, which one would one would you pick?

    A really nice, big, Dragon - of almost any ilk, would be rather excellent in my humble opinion.

  • zombietaggerungzombietaggerung Posts: 3,756
    SimonJM said:
    GamePrint said:

    If you could pick any Daz Character for a collectible, which one would one would you pick?

    A really nice, big, Dragon - of almost any ilk, would be rather excellent in my humble opinion.

    Oh yeah, that would be cool.

  • XtraDimensionalXtraDimensional Posts: 509
    Any more progress on the miniatures?
  • FSMCDesignsFSMCDesigns Posts: 12,774
    GamePrint said:

    If you could pick any Daz Character for a collectible, which one would one would you pick?

    Female centaur

  • SylvanSylvan Posts: 2,718
    GamePrint said:

    If you could pick any Daz Character for a collectible, which one would one would you pick?

    The new Edward character would make for some awesome possibilities :D
  • SylvanSylvan Posts: 2,718
    edited March 2018
    GamePrint said:

    If you print at home, show us your prints! 

    https://daz3d.gameprint.net/​

     

    What do you mean by "If you print at home"? As in I would use my own 3D printer?
    Post edited by Sylvan on
  • BeeMKayBeeMKay Posts: 7,019
    FSMCDesigns said:
    GamePrint said:

    If you could pick any Daz Character for a collectible, which one would one would you pick?

    Female centaur

    I got myself a male centaur (with wings)... They look totally amazing!

  • nonesuch00nonesuch00 Posts: 18,288

    A unaltered except for pose DAZ Original?

    I'd probably pose the DAZ Horse 2 or the DAZ Big Cat 2 or the Eastern Dragon into a good pose.

  • GamePrintGamePrint Posts: 539

    Yes thats exactly what we mean? Do you have a 3D Printer? Which one?

     

    If you could pick any Daz Character for a collectible, which one would one would you pick?

    Estroyer said:
    GamePrint said:

    If you print at home, show us your prints! 

    https://daz3d.gameprint.net/​

     

     

    What do you mean by "If you print at home"? As in I would use my own 3D printer?

     

    Estroyer said:
    GamePrint said:

    If you print at home, show us your prints! 

    https://daz3d.gameprint.net/​

     

     

    What do you mean by "If you print at home"? As in I would use my own 3D printer?

     

  • GamePrintGamePrint Posts: 539
    Hanabi said:
    Any more progress on the miniatures?

    Honeslty, we are still on this and have not yet cracked the code. 

    Sorry for making you wait so long. We promise the outcome will be worth it.

  • GamePrintGamePrint Posts: 539
    70xploitation said:

    Hi, 

    I sent my daz Character by Gameprint Plug in  But i've no result preview stay blocked " your  model is being processed, this may take Couple of minutes...."

    So i sent my render pic like that to complete my order : 

    Could you DM your account email, and I will check your upload. If it successfully went through I should be able to tell you its status. 

     

  • GamePrintGamePrint Posts: 539

    A picture of a wing before and after adding the final details.

    You can find the full story here. 

    https://www.daz3d.com/forums/discussion/210041/turning-daz-3d-models-into-3d-printable-and-hand-painted-figures#latest

    image

     

     

  • GamePrintGamePrint Posts: 539
    edited April 2018

    $2 special on download and print your own models. #Daz3D.

    https://daz3d.gameprint.net/

    image

     

    Post edited by GamePrint on
  • HoMartHoMart Posts: 480
    edited April 2018
    GamePrint said:

    Yes thats exactly what we mean? Do you have a 3D Printer? Which one?

    Estroyer said:
    GamePrint said:

    If you print at home, show us your prints!

    I have a Creality CR10 - used it to build my own printer ( based on the HyperCubeEvolution by Scott3D on thingiverse)

    Submitted Daveyabbo´s "Borg for Genesis 8" to GamePrint for the "repair"/prepair.

    Here´s the render

    Printed it on my selfbuild printer (was the second "testprint) - just after removing supports

    Due to poor supportstructure she`s lost her left pinkie.

    Material:         PLA
    Weight:          280g (with support)

    Size:             12"
    Layerheight:  0,1mm
    Printtime:       53 hours

    Animated Gif from the print can be seen here http://fav.me/dc84zg9

    WP_20180402_14_11_51_Pro.jpg
    800 x 1065 - 606K
    2OT - GwenBorg - _ IRAY_002 small.jpg
    800 x 1131 - 147K
    collage.jpg
    800 x 941 - 506K
    Post edited by HoMart on
  • ploosmaploosma Posts: 2

    What is the status on using nude models? And if we can use them what are the dos and don'ts ?

  • GrazeGraze Posts: 418
    ploosma said:

    What is the status on using nude models? And if we can use them what are the dos and don'ts ?

    On page 9 of this thread, GamePrint says, "It is on a model by model basis, our production team will review it and decide if it meets our terms of use "

    So basically you have to summit your nude models to find out.  But GamePrint did say they don't print out life size nudes.

     

  • ploosmaploosma Posts: 2
    Graze said:
    ploosma said:

    What is the status on using nude models? And if we can use them what are the dos and don'ts ?

    On page 9 of this thread, GamePrint says, "It is on a model by model basis, our production team will review it and decide if it meets our terms of use "

    So basically you have to summit your nude models to find out.  But GamePrint did say they don't print out life size nudes.

     

    Oh I see. I'm just looking for what is acceptable and what is sexual content. 

  • GamePrintGamePrint Posts: 539
    edited April 2018
    ploosma said:
    Graze said:
    ploosma said:

    What is the status on using nude models? And if we can use them what are the dos and don'ts ?

    On page 9 of this thread, GamePrint says, "It is on a model by model basis, our production team will review it and decide if it meets our terms of use "

    So basically you have to summit your nude models to find out.  But GamePrint did say they don't print out life size nudes.

     

    Oh I see. I'm just looking for what is acceptable and what is sexual content. 

    Hey, its really on a case by case basis. We ask that you send us the model, and our team will review it.

     

     

    Post edited by GamePrint on
  • GamePrintGamePrint Posts: 539
    HoMart said:
    GamePrint said:

    Yes thats exactly what we mean? Do you have a 3D Printer? Which one?

    Estroyer said:
    GamePrint said:

    If you print at home, show us your prints!

    I have a Creality CR10 - used it to build my own printer ( based on the HyperCubeEvolution by Scott3D on thingiverse)

    Submitted Daveyabbo´s "Borg for Genesis 8" to GamePrint for the "repair"/prepair.

    Here´s the render

    Printed it on my selfbuild printer (was the second "testprint) - just after removing supports

    Due to poor supportstructure she`s lost her left pinkie.

    Material:         PLA
    Weight:          280g (with support)

    Size:             12"
    Layerheight:  0,1mm
    Printtime:       53 hours

    Animated Gif from the print can be seen here http://fav.me/dc84zg9

    Ouch! and suprising she's pink as well! 

  • nonesuch00nonesuch00 Posts: 18,288
    edited April 2018
    HoMart said:
    GamePrint said:

    Yes thats exactly what we mean? Do you have a 3D Printer? Which one?

    Estroyer said:
    GamePrint said:

    If you print at home, show us your prints!

    I have a Creality CR10 - used it to build my own printer ( based on the HyperCubeEvolution by Scott3D on thingiverse)

    Submitted Daveyabbo´s "Borg for Genesis 8" to GamePrint for the "repair"/prepair.

    Here´s the render

    Printed it on my selfbuild printer (was the second "testprint) - just after removing supports

    Due to poor supportstructure she`s lost her left pinkie.

    Material:         PLA
    Weight:          280g (with support)

    Size:             12"
    Layerheight:  0,1mm
    Printtime:       53 hours

    Animated Gif from the print can be seen here http://fav.me/dc84zg9

     I guess I shouldn't say that is my favorite print in this thread so far, but it is! Correction - because it's a render. The print is good to but hard to discern details. I like the pink.

    Post edited by nonesuch00 on
  • RGcincyRGcincy Posts: 2,837
    edited April 2018

    Back in December I got my first GamePrint model, a primed 7 inch figurine. I finally got around to painting it using a combination of airbrush and a small round brush (3/0 size which is 1/64"). I used a variety of Vallejo paints. mixing the colors to get the variety of earth tones I was looking for. Below are some photos of the finished figure. This is the first one I've ever painted, so there's a few things I would do better in the future. It helps to have a steady hand and a magnifying glass!

    The primed figure as received:

    The painted figure:

     

    A closeup of the face. In person, you would never see it this close as the face from lips to forehead is only 1/2 inch high.

    Viking GamePrint figurine primed.jpg
    1065 x 1420 - 191K
    IMG_5090.JPG
    2448 x 3264 - 2M
    IMG_5094.JPG
    2448 x 3264 - 2M
    IMG_5095.JPG
    2448 x 3264 - 2M
    IMG_5102.JPG
    1850 x 1705 - 571K
    Post edited by RGcincy on
  • GamePrintGamePrint Posts: 539
    RGcincy said:

    Back in December I got my first GamePrint model, a primed 7 inch figurine. I finally got around to painting it using a combination of airbrush and a small round brush (3/0 size which is 1/64"). I used a variety of Vallejo paints. mixing the colors to get the variety of earth tones I was looking for. Below are some photos of the finished figure. This is the first one I've ever painted, so there's a few things I would do better in the future. It helps to have a steady hand and a magnifying glass!

    The primed figure as received:

    The painted figure:

     

    A closeup of the face. In person, you would never see it this close as the face from lips to forehead is only 1/2 inch high.

    Wow, it looks awesome! Great work! How long did it take you? Definitely, a magnifying glass is needed or even magnifying glasses work as well.

     

Sign In or Register to comment.