Loading...
> >

Novica & Forum Members Tips & Product Reviews Pt 10

1…94959799100

Comments

  • LeanaLeana Posts: 11,737
    nonesuch00 said:
    Novica said:

    Be sure to check the featured stores in each banner sale, one is in multiple sales so you know what that means.

    I saw 3 PA featured stores in different sales but I don't know what that means.

    Stacking discounts

  • NovicaNovica Posts: 23,887
    edited May 2018

    If you meet the requirement for that sale (like if 2 from that page gets you an additional 20% (just making that up) and if that vendor is in another banner sale and you meet the requirements for that second page (say you buy 1 and get additional 10%) then that vendor will stack. Try DirtyFairy. Some go 70% or more. There's a lot of textures for bundle outfits, you may have the outfits but never got the textures.

    Post edited by Novica on
  • nonesuch00nonesuch00 Posts: 18,131

    Oh, thanks. I'll have to remember that after I recover from my Edie 8 Pro Bundle spending spree.

  • donovancolbertdonovancolbert Posts: 1,421

    So, I'm having terrible luck with the trailer crashing out as soon as I add any figures. I had to step down to smaller resolution textures on the figures, but changing to a more detailed Terradome3 HDR started crashing it out immediately again. This is on an 8gb 1070 card... and it starts, it just crashes out as it goes along... 

    So I don't think it is exactly a memory problem.

    Just realized it might be that my drive with my temporary file was off. Pretty sure that explains why it was getting started and then dumping. Operator error. :)  

    But there is a lot going on with that trailer, and you can't just load an external view that I can see... I guess I could go through and delete things not in the shot... but just be aware if you're ineterested in it, it wants a lot of horsepower. Especially if you're going to be doing wide shots with lots of other things going on. 

     

     

  • barbultbarbult Posts: 24,246
    nonesuch00 said:
    Novica said:

    Be sure to check the featured stores in each banner sale, one is in multiple sales so you know what that means.

    I saw 3 PA featured stores in different sales but I don't know what that means.

    Sometimes discounts compound when you satisfy the purchase requirements of multiple sales in a single cart, resulting in higher discounts than advertised for an individual sale.
  • NovicaNovica Posts: 23,887
    edited May 2018

    @barbult

    You sound like you'd be a great writer for the dictionary!  

    Stacking: when discounts compound with purchase requirements of multiple sales in a single cart, resulting in higher discounts than advertised for an individual sale. 

    Post edited by Novica on
  • FeralFeyFeralFey Posts: 3,928
    Novica said:

    @feralfey  A heads up. The Lawn Tool poses have an extra space in Genesis 8 Female so it's making a duplicate out in the main menu in Content Library where it says Genesis 8 Female. Yours is Genesis 8 (space space) Female. That needs to be fixed and updated so we don't have duplicate labels for main figures. 

    Thanks for letting me know. I'll get on it.

  • barbultbarbult Posts: 24,246
    Novica said:

    @barbult

    You sound like you'd be a great writer for the dictionary!  

    Stacking: when discounts compound with purchase requirements of multiple sales in a single cart, resulting in hiher discounts than advertised for an individual sale. 

    Ha! I  wrote that on my phone, before I could see that other people had already answered the question sufficiently. I didn't see that there was already another whole page of responses in the thread. It does sound a bit pedantic, but when typing on a phone keyboard, you must be succinct.

  • NovicaNovica Posts: 23,887

    @feralfey   Thanks so much! They're handy poses (if I ever get my characters around to doing yardwork. They're as bad as I am LOL) 

  • barbultbarbult Posts: 24,246
    edited May 2018
    Novica said:

    So you can see this out of the box. Be aware the 50's Fabulous Morphing Chair  wasn't quite so fabulous out of the box with a man. To get his feet on the floor for a regular sitting pose, the chair would have to be raised. Some scaling here and there will address it, or extending the legs of the character so they're more in front of them. I'm checking now to see if there were chair legs morphs, back in a few.

    Edit: Okay, there's a cushion tall which will put them up a few inches. Wouldn't have been enough with just that option (you can always undo the parameter limits, but I think any more height than the parameter would look a bit funky.)  Style 5 makes the entire chair larger. There isn't an extending the chair legs option that I could find. They are not selectable for morphing, only for surfaces. 

    The chair does have a lot of fun shapes, and the seat morphs to indent. I think with the combination of Styles sliders and cushion morphs it is workable. Just be aware out of the box may need some tweaking for taller individuals. 

    FWSA Zander HD (Gen8M)  reminds me of Paulo Benedeti  when the facial hair is applied, except he doesn't have thick enough eyebrows (or facial hair, and it needs to be darker) with the option I used. 

    I really like Osher Hair (Gen 3M/ Gen8M) 

    BUG ALERT:

    Apparently, changing your mind about what material preset you want is not allowed either. When you change materials presets, it adds another set of geometry shells to the scene, parented to the chair. I ended up with a big mess of 8 geometry shells, as I tried different presets. Try applying preset 1 then 2 then 3, and then 4. 4 is supposed to be a shiny black chair. See what you get. Yuck. I didn't even let it render past 0%.

    Help request submitted.

    Post edited by barbult on
  • Robert FreiseRobert Freise Posts: 4,448
    Novica said:

    @feralfey   Thanks so much! They're handy poses (if I ever get my characters around to doing yardwork. They're as bad as I am LOL) 

    Yardwork?? you should see the mess stacked up on my patio and in my garage waiting on me to do something with it

  • NovicaNovica Posts: 23,887
    edited May 2018

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    Post edited by Novica on
  • barbultbarbult Posts: 24,246
    edited May 2018
    Novica said:

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

    Post edited by barbult on
  • nonesuch00nonesuch00 Posts: 18,131
    barbult said:
    Novica said:

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

    Whoa! Fearing peace would poison her, some abstract modern saint. A painting, or a sculpture, or a culture of restraint. 

    ...as Deborah Harry sings in 'Inner City Spillover'. She's one of the better lyricists I think.

  • zombietaggerungzombietaggerung Posts: 3,726
    barbult said:
    Novica said:

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

    You really nailed it! ;D

  • firewardenfirewarden Posts: 1,482
    edited May 2018
    nonesuch00 said:
    barbult said:
    Novica said:

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

     

    Wow! Creatively cool! Gotta love the originality and ingenuity of folks on this forum!

    Post edited by firewarden on
  • barbultbarbult Posts: 24,246
    zombietaggerung said:
    barbult said:
    Novica said:

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

    You really nailed it! ;D

    I love your comment!

  • firewardenfirewarden Posts: 1,482
    barbult said:
    zombietaggerung said:
    barbult said:
    Novica said:

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

    You really nailed it! ;D

    I love your comment!

    I agree! Gave me a good chuckle!

  • Robert FreiseRobert Freise Posts: 4,448
    firewarden said:
    barbult said:
    zombietaggerung said:
    barbult said:
    Novica said:

    Well, that figures.  I didn't test the material presets for the chair because I was preoccupied with trying to find leg morphs for the stubby chair. Then decided I wouldn't be using it very often, if at all. Glad you caught it @barbult   and love your sense of humor, as always. ("Apparently changing your mind about what preset you want isn't allowed either.") 

    This is the gallery image I finally made with it. I didn't have quite the same scaling issues you had. My pose was more reclined. In the end, I zoomed in and you can't see his feet anyway. Do you like his hairdo?

    You really nailed it! ;D

    I love your comment!

    I agree! Gave me a good chuckle!

    Ditto

  • NovicaNovica Posts: 23,887

    I think I have the wittiest thread contributors on the entire planet. First Barbult, now @zombietaggerung   BTW, I really am curious as to how that forum member name came about. Is it something I just don't know about? 

    And yes, LOVE the hairdo. Watch some vendor make a product like that. You should go copyright it! 

  • NovicaNovica Posts: 23,887

    Barbult, I'm also wondering if his height had something to do with it. He appears quite tall to me. Perhaps yours wasn't as tall. 

  • zombietaggerungzombietaggerung Posts: 3,726
    edited May 2018
    Novica said:

    I think I have the wittiest thread contributors on the entire planet. First Barbult, now @zombietaggerung   BTW, I really am curious as to how that forum member name came about. Is it something I just don't know about? 

    And yes, LOVE the hairdo. Watch some vendor make a product like that. You should go copyright it! 

    Haha! Thank you! It's not a really terribly exciting story of my username, I really enjoyed the Redwall books by Brian Jaques when I was a kid, and I loved the name of one of the characters; an otter called Taggerung, but I didn't think i should just use the name as is, so I stuck zombie in front of it and voila! A username was born.

    Post edited by zombietaggerung on
  • NovicaNovica Posts: 23,887
    edited May 2018

    I had to look him up because he sounds adorable. Aren't you cute! Not quite a zombie, but he'll do.

    TaggerungUS.jpg
    445 x 648 - 57K
    Post edited by Novica on
  • zombietaggerungzombietaggerung Posts: 3,726

    Aw thank you! laugh That one was one of my favorites.

  • NovicaNovica Posts: 23,887
    edited May 2018

    I assumed a "he?"  for the beaver?

    Post edited by Novica on
  • zombietaggerungzombietaggerung Posts: 3,726

    Yes, Tagg is a male. I however am a girl.

  • Robert FreiseRobert Freise Posts: 4,448

    Has anyone seen any hair with rollers ?

  • OdaaOdaa Posts: 1,548
    Robert Freise said:

    Has anyone seen any hair with rollers ?

    Used to be one at Rendo, I think. Goldtassel, SWAM, or that other PA with a similar approach to hair.

  • NathNath Posts: 2,808
    Robert Freise said:

    Has anyone seen any hair with rollers ?

    There is an old one for V4 - but I'm not on my render machine so can't look it up

  • Robert FreiseRobert Freise Posts: 4,448

    Thanks I was kinda hopeing for something a little newer for convenience sake

This discussion has been closed.