Loading...
> >

GENERAL FREEBIE REQUESTS Part 2

1…1011131516…100

Comments

  • PookPook Posts: 121
    edited December 1969

    Thank you so much for both of those! I'd actually spotted that morph in passing, but didn't figure out that it worked with the basic Poser dog! I saw that it worked with the Zygote one, but didn't know it was the same thing!

  • KeryaKerya Posts: 10,943
    edited December 1969

    The old Zygote models ARE the old Poser models /animals.
    :)

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Kerya said:
    The old Zygote models ARE the old Poser models /animals.
    :)

    One warning/tip when using Lyne's changes...you may need to uncompress the geometry, if you are grabbing the originals from a fairly recent version of Poser. They weren't written to use the compressed files, so it will give a 'not found' error...

  • DollyGirlDollyGirl Posts: 2,656
    edited December 1969

    mjc1016 said:
    Kerya said:
    The old Zygote models ARE the old Poser models /animals.
    :)

    One warning/tip when using Lyne's changes...you may need to uncompress the geometry, if you are grabbing the originals from a fairly recent version of Poser. They weren't written to use the compressed files, so it will give a 'not found' error...

    And what mj means by that is the obj for the dog is in obz format. All you need to do is open the obz with winzip or something equivalent and then extract the obz file. It will then be an obj file and Lynn's cr2 will work just fine.

  • teriperkins_bfd4324187teriperkins_bfd4324187 Posts: 206
    edited December 1969

    Is there a morph anywhere that will turn the Mil Dog into a greyhound/whippet-like body? Also, is there a brindle texture map for the Mil dog like the one below? Thanks for your help.

    Brindle_greyhound.jpg
    500 x 369 - 159K
  • HeadwaxHeadwax Posts: 9,987
    edited December 1969

    looking for a model of da vinci glider - or similar - if anyone knows of one?

    http://www.leonardodavincisinventions.com/wp-content/uploads/2012/02/Da-Vinci-glider.jpg

    thanks in advance :)

  • KeryaKerya Posts: 10,943
    edited December 1969

    head wax said:
    looking for a model of da vinci glider - or similar - if anyone knows of one?

    http://www.leonardodavincisinventions.com/wp-content/uploads/2012/02/Da-Vinci-glider.jpg

    thanks in advance :)

    Similar
    http://www.ontarget3d.com/site/Products/1006-navicella-for-poser.aspx

  • TjebTjeb Posts: 507
    edited December 1969

    Or this one maybe:
    http://www.renderosity.com/mod/bcs/ms13-da-vinci-glider/99486/

    or a simple one...

    Glider.jpg
    680 x 384 - 38K
  • HeadwaxHeadwax Posts: 9,987
    edited January 2014

    Thankyou Kerya and Tjeb

    They look like they will both fit the bill admirably!
    Much obliged :)

    cheers!

    tjeb, did you model that last one//.? Nice work!

    Post edited by Headwax on
  • TjebTjeb Posts: 507
    edited December 1969

    No, I didn't. I found it somewhere.
    It's free. It's an .obj.
    Just played a bit with it in Blender.

  • HeadwaxHeadwax Posts: 9,987
    edited December 1969

    tjeb said:
    No, I didn't. I found it somewhere.
    It's free. It's an .obj.
    Just played a bit with it in Blender.

    thanks tjeb, nice find !

  • vesbin_8238e8e9f3vesbin_8238e8e9f3 Posts: 49
    edited February 2014

    RDuda once posted pictures of a Robotech Cyclone armor... I would very much like to have that set if its out there somewhere or maybe if someone is up for the challenge of building one....


    Thank you very much in advance

    Post edited by vesbin_8238e8e9f3 on
  • BlazeMystEraBlazeMystEra Posts: 464
    edited February 2014

    I downloaded this free plugin a while ago, that included a special option to save files with increasing numbers behind the filename. I tried finding it, but neither is it in my backups, nor do I find it here... I guess I'm using completely wrong keywords... anyone know what I'm talking about and where I can redownload it?

    Thank you ever so much :)

    edit: Found it... looked in the wrong place ^^ if someone else is interested.

    Post edited by BlazeMystEra on
  • SassanikSassanik Posts: 340
    edited December 1969

    Looking for Buddhist style monk robes, doesn't need to be overly specific to one region. I tried the nagalines set, I think eblank put them out? But they don't work right on Genesis. Any idea's or suggestions?

    Amy

  • miss.terymiss.tery Posts: 0
    edited December 1969

    Does anybody know of a free dove that I can use? I'm using Daz Studio and really need a free dove ...

    http://www.daz3d.com/forums/discussion/21734/

    I saw that thread but there weren't any links...

    All help is gladly appreciated. Thanks.

  • robkelkrobkelk Posts: 3,259
    edited February 2014

    miss.tery said:
    Does anybody know of a free dove that I can use? I'm using Daz Studio and really need a free dove ...

    http://www.daz3d.com/forums/discussion/21734/

    I saw that thread but there weren't any links...

    All help is gladly appreciated. Thanks.

    Is non-commercial and 3DS format okay? (There are a few free converters out there that will convert 3DS to PP2, including PropViewer over on ShareCG)
    http://artist-3d.com/free_3d_models/dnm/model_disp.php?uid=1646
    Post edited by robkelk on
  • miss.terymiss.tery Posts: 0
    edited December 1969

    I think that should be ok... is non-commercial ok for a school project? And I think 3ds can be imported into Daz so yeah :D Thanks so much.

  • miss.terymiss.tery Posts: 0
    edited February 2014

    robkelk said:
    miss.tery said:
    Does anybody know of a free dove that I can use? I'm using Daz Studio and really need a free dove ...

    http://www.daz3d.com/forums/discussion/21734/

    I saw that thread but there weren't any links...

    All help is gladly appreciated. Thanks.

    Is non-commercial and 3DS format okay? (There are a few free converters out there that will convert 3DS to PP2, including PropViewer over on ShareCG)
    http://artist-3d.com/free_3d_models/dnm/model_disp.php?uid=1646

    -never mind... I worked it out... thanks :D-

    Post edited by miss.tery on
  • DollyGirlDollyGirl Posts: 2,656
    edited December 1969

    miss.tery said:
    robkelk said:
    miss.tery said:
    Does anybody know of a free dove that I can use? I'm using Daz Studio and really need a free dove ...

    http://www.daz3d.com/forums/discussion/21734/

    I saw that thread but there weren't any links...

    All help is gladly appreciated. Thanks.

    Is non-commercial and 3DS format okay? (There are a few free converters out there that will convert 3DS to PP2, including PropViewer over on ShareCG)
    http://artist-3d.com/free_3d_models/dnm/model_disp.php?uid=1646

    I was wondering, and it's probably a stupid question but, how do you download it?
    Where it says: Model download: free (.3ds) 3D Studio Max file/ Life Forms/ bird-dove.zip

    about half way down the page

  • miss.terymiss.tery Posts: 0
    edited December 1969

    Dollygirl said:
    miss.tery said:
    robkelk said:
    miss.tery said:
    Does anybody know of a free dove that I can use? I'm using Daz Studio and really need a free dove ...

    http://www.daz3d.com/forums/discussion/21734/

    I saw that thread but there weren't any links...

    All help is gladly appreciated. Thanks.

    Is non-commercial and 3DS format okay? (There are a few free converters out there that will convert 3DS to PP2, including PropViewer over on ShareCG)
    http://artist-3d.com/free_3d_models/dnm/model_disp.php?uid=1646

    I was wondering, and it's probably a stupid question but, how do you download it?
    Where it says: Model download: free (.3ds) 3D Studio Max file/ Life Forms/ bird-dove.zip

    about half way down the page

    Yes, I found it... thanks... but does anyone know of any textures for it? Thanks.

  • moneypot_f68538fe57moneypot_f68538fe57 Posts: 2
    edited December 1969

    How do I put the freebees into daz3d? I'm new

  • 3dOutlaw3dOutlaw Posts: 2,471
    edited December 1969

    Does anyone know of a "No Nostril" morph for V4 or A4? I've been trying to make one, but it's not coming out very well... (link)

    ...or know of an anime style nose (no nostrils) out there?

  • dakkuuandakkuuan Posts: 305
    edited December 1969

    Anyone know of a Japanese male morph for genesis, not an anime one, which seems like all i can find. I have the evolution bundle. I'll also work with G2M, but I don't have any daz morphs for that.

  • DoctorJellybeanDoctorJellybean Posts: 8,465
    edited December 1969

    In the old forum, there was a Marijuana texture addon for a Lisa Botanical plant. Does anyone have a link, and which LB plant is required? Failing that, any marijuana plants around?

  • ChoholeChohole Posts: 33,604
    edited February 2014

    DoctorJellybean said:
    In the old forum, there was a Marijuana texture addon for a Lisa Botanical plant. Does anyone have a link, and which LB plant is required? Failing that, any marijuana plants around?

    http://www.sharecg.com/v/38610/gallery/21/DAZ-Studio/Cannabis-Sativa-240?interstitial_displayed=Yes

    It is for the Coleus

    Post edited by Chohole on
  • DoctorJellybeanDoctorJellybean Posts: 8,465
    edited December 1969

    chohole said:
    DoctorJellybean said:
    In the old forum, there was a Marijuana texture addon for a Lisa Botanical plant. Does anyone have a link, and which LB plant is required? Failing that, any marijuana plants around?

    http://www.sharecg.com/v/38610/gallery/21/DAZ-Studio/Cannabis-Sativa-240?interstitial_displayed=Yes

    It is for the Coleus

    That's the one I was looking for, thank you!

  • 3dOutlaw3dOutlaw Posts: 2,471
    edited February 2014

    3doutlaw said:
    Does anyone know of a "No Nostril" morph for V4 or A4? I've been trying to make one, but it's not coming out very well... (link)

    ...or know of an anime style nose (no nostrils) out there?

    Disregard, I bought Anime Doll by StudioMaya for $5...works perfect.

    Post edited by 3dOutlaw on
  • ChronopunkChronopunk Posts: 292
    edited December 1969

    I could really use an Elegant Gothic Lolita outfit that isn't for V4 exclusively and will work with Genesis or Genesis 2 on a range from "adequately" to "quite well."

    There are a couple over on Rendo, but as I actually know and hang out with a few ladies who are very in to the whole EGL scene, I can attest that they are not (in fact) actually EGL-based. They're similar, but not "it" really.

    I could also use a sleeveless, long-hem, Cheongsam dress, if anyone knows where such a thing might exist. Also for use on Genesis/G2.

    Any pointers in right directions would be greatly appreciated.

  • robkelkrobkelk Posts: 3,259
    edited February 2014

    Chronopunk said:
    ...
    I could also use a sleeveless, long-hem, Cheongsam dress, if anyone knows where such a thing might exist. Also for use on Genesis/G2.
    ...

    I know of one for Aiko 3. Do you have the Gen3 Iconic Shapes for Genesis?
    http://www.sharecg.com/v/21817/
    Post edited by robkelk on
  • ChronopunkChronopunk Posts: 292
    edited December 1969

    robkelk said:
    Chronopunk said:
    ...
    I could also use a sleeveless, long-hem, Cheongsam dress, if anyone knows where such a thing might exist. Also for use on Genesis/G2.
    ...

    I know of one for Aiko 3. Do you have the Gen3 Iconic Shapes for Genesis?
    http://www.sharecg.com/v/21817/

    I do not. I've been attempting to avoid legacy shapes as much as possible. If I can't find another resource, I'll look in to this one. Thank you for pointing me at it! I'll keep looking a bit more before I make up my mind. :)

This discussion has been closed.