GENERAL FREEBIE REQUESTS Part 2

DoctorJellybean

Any Door knobs and locks, like this

https://www.cgtrader.com/3d-models/architectural-details/door-window/door-knob-hardware-2

Hopefully cheaper or even better free

ModernWizard

Anyone seen any headscarves similar to this? https://www.renderosity.com/mod/bcs/?ViewProduct=108769 All I need is the headscarf, so would rather not pay like $14.00. Thanks.

V4, Genesis, G2F, G3F okay.

EDIT: This is for my Muslim characters, so it needs to cover all hair on the head.

--MW

 

Charlie Judge

ModernWizard said:

Anyone seen any headscarves similar to this? https://www.renderosity.com/mod/bcs/?ViewProduct=108769 All I need is the headscarf, so would rather not pay like $14.00. Thanks.

V4, Genesis, G2F, G3F okay.

EDIT: This is for my Muslim characters, so it needs to cover all hair on the head.

--MW

 

Freebie for V4: http://www.sharecg.com/v/54886/browse/11/Poser/V4DrapedHood

ETA Slightly less expensive than the one you listedd but by the same artist: https://www.renderosity.com/mod/bcs/modern-muslim-girl/88021/

 

ModernWizard

Thank you thank you thank you! I can definitely use the hood by Lyrra and pull it closer around the face so that no hair shows!

--MW

Charlie Judge

ModernWizard said:

Thank you thank you thank you! I can definitely use the hood by Lyrra and pull it closer around the face so that no hair shows!

--MW

And load the figure without hair so you won't have to worry about poke-thru

ModernWizard

Anyone seen a free modern video camera? Not a shoulder-mounted one, but a hand-held for personal use.

--MW

Charlie Judge

Free includes obj format: http://www.turbosquid.com/3d-models/free-3ds-model-samsung-video-camera/503997

Free unknown format: https://www.cgtrader.com/free-3d-models/electronics/video/camcorder

Paid: https://www.renderosity.com/mod/bcs/video-camera-by-truform/82850

and a little more eloborate: http://inlitestudio.com/3d/product/3d-professional-video-camera/

Kerya

ModernWizard said:

Anyone seen a free modern video camera? Not a shoulder-mounted one, but a hand-held for personal use.

--MW

http://www.sharecg.com/v/67916/browse/11/Poser/HD1000_MiniCam

 

FWIW

About two computer crashes ago I had a nice freebie chess set (For DS) that I apparently no longer have, and can not seem to find on Rendo or Sharecg. Does anyone know where I can find a decent free chess set?

Kerya

Are you a PC member? There is a free chess set http://www.daz3d.com/forums/discussion/8880/daz-platinum-club-freebies-reloaded/p1

 

Charlie Judge

WinterFlame said:

About two computer crashes ago I had a nice freebie chess set (For DS) that I apparently no longer have, and can not seem to find on Rendo or Sharecg. Does anyone know where I can find a decent free chess set?

There are a lot of free sets over at Rendo:

https://www.renderosity.com/mod/freestuff/?item_id=24403

https://www.renderosity.com/mod/freestuff/?item_id=62483

https://www.renderosity.com/mod/freestuff/?item_id=31574

https://www.renderosity.com/mod/freestuff/?item_id=74469

https://www.renderosity.com/mod/freestuff/?item_id=75190

https://www.renderosity.com/mod/freestuff/?item_id=69101

https://www.renderosity.com/mod/freestuff/?item_id=70800

 

ModernWizard

Has anyone seen a decent raincoat? I don't care what figure it's for. It just needs to have a hood all the way up. the front all the way closed, and a relatively loose fit throughout the body, kind of like this:

This G2F coat and dress set by Cybrea is the closest I've found, but the coat doesn't close up the front, making it useless for rain protection. >_> https://www.renderosity.com/mod/freestuff/genesis-2-female---dress-amp-coat/73569

 

--MW

will shetterly

This raincoat looks good in the pics: http://contentparadise.com/productDetails.aspx?id=842

Kerya

Dazdynamic and a Poncho ... http://www.optitex-dynamiccloth.com/FreebieDownload02.php

 

FrankTheTank

Hello all,

I'm looking for fast rendering creepy trees similar to this one, but preferably without the face, I want just a little a little more realism.

Charlie Judge

DvoraszeniaStudios said:

Hello all,

I'm looking for fast rendering creepy trees similar to this one, but preferably without the face, I want just a little a little more realism.

Free:http://www.sharecg.com/v/56289/favorite/5/3D-Model/Spooky-Tree

Some paid ones:

http://www.daz3d.com/spooky-trees

http://www.daz3d.com/dms-sacrifice

http://hivewire3d.com/creepy-trees.html

http://hivewire3d.com/creepy-trees-ii.html

FrankTheTank

Charlie Judge said:

DvoraszeniaStudios said:

Hello all,

I'm looking for fast rendering creepy trees similar to this one, but preferably without the face, I want just a little a little more realism.

Free:http://www.sharecg.com/v/56289/favorite/5/3D-Model/Spooky-Tree

Some paid ones:

http://www.daz3d.com/spooky-trees

http://www.daz3d.com/dms-sacrifice

http://hivewire3d.com/creepy-trees.html

http://hivewire3d.com/creepy-trees-ii.html

Thanks, the free one is 3ds though, I can't import it. But that one would have worked well.

The "spooky trees" look interesting, and it even has a billboard background which could come in handy to fill out the scene. I'm wish-listing those, but I'm gonna keep looking for freebies. (I need to save my money for some bigger purchases right now with all these sales. And this tree scene I'm working is just a one time thing, so I don't want to spend money if I don't have to.) But thanks for the links.

Charlie Judge

DvoraszeniaStudios said:

Charlie Judge said:

DvoraszeniaStudios said:

 

Thanks, the free one is 3ds though, I can't import it. But that one would have worked well.

 

True; BUT it can be converted to obj which you can then import. Either Blender or Prop Viewer can convert it and both those programs are free. Also some online sevices such  as GreenToken will convert it for free.

And I almost forgot this one: http://www.daz3d.com/one-tree-hill It's not free but it is currently on sale for $6

FrankTheTank

Charlie Judge said:

DvoraszeniaStudios said:

Charlie Judge said:

DvoraszeniaStudios said:

 

Thanks, the free one is 3ds though, I can't import it. But that one would have worked well.

 

True; BUT in can be converted to obj which you can then import. Either Blender or Prop Viewer can convert it and both those programs are free. Also some online sevices such  as GreenToken will convert it for free.

Well greentoken worked like a charm, I had never heard of that site. That was awesome and painless! Thanks so much. I just wish I had known of that sooner, a while back I deleted a bunch of free stuff I had downloaded in 3ds version, and deleted it all as I didn't want to be troubled with converting it. Very much appreciated sir!

ModernWizard

Kerya said:

ModernWizard said:

Anyone seen a free modern video camera? Not a shoulder-mounted one, but a hand-held for personal use.

--MW

http://www.sharecg.com/v/67916/browse/11/Poser/HD1000_MiniCam

 

Thanks Kerya! I used this in my scene to great effect. The details are wonderfu.

will shetterly said:

This raincoat looks good in the pics: http://contentparadise.com/productDetails.aspx?id=842

Thanks will. This is the only raincoat of that type that I've seen anywhere, so I ended up purchasing it and converting it to G3F.

 

In other news, has anyone seen a rack of taxidermy antlers? Deer or moose would be best. I thought to use those from AdamThwaites' free moose prop, but they're too low-res. :(

--MW

Eustace Scrubb

ModernWizard said:

In other news, has anyone seen a rack of taxidermy antlers? Deer or moose would be best. I thought to use those from AdamThwaites' free moose prop, but they're too low-res. :(

--MW

If toon ones work, check 'Rosity for the "Reindeer" add-on to LD original "Furette".  Otherwise, looke at Lynne's moose or deer figures.

will shetterly

ModernWizard said:

Kerya said:

ModernWizard said:

In other news, has anyone seen a rack of taxidermy antlers? Deer or moose would be best. I thought to use those from AdamThwaites' free moose prop, but they're too low-res. :(

--MW

I just noticed this, and am now agonizing over whether to buy it: http://www.daz3d.com/kelly-lodge You can see the antlers in the pics.

ModernWizard

will shetterly said:

ModernWizard said:

Kerya said:

ModernWizard said:

In other news, has anyone seen a rack of taxidermy antlers? Deer or moose would be best. I thought to use those from AdamThwaites' free moose prop, but they're too low-res. :(

--MW

I just noticed this, and am now agonizing over whether to buy it: http://www.daz3d.com/kelly-lodge You can see the antlers in the pics.

Yeah, I saw that and got inspired to construct my own out of models that I had or could get for free. I'm just lacking antlers, however. :D

 

--MW

Charlie Judge

ModernWizard said:

will shetterly said:

ModernWizard said:

Kerya said:

ModernWizard said:

In other news, has anyone seen a rack of taxidermy antlers? Deer or moose would be best. I thought to use those from AdamThwaites' free moose prop, but they're too low-res. :(

--MW

I just noticed this, and am now agonizing over whether to buy it: http://www.daz3d.com/kelly-lodge You can see the antlers in the pics.

Yeah, I saw that and got inspired to construct my own out of models that I had or could get for free. I'm just lacking antlers, however. :D

 

--MW

Have you considered Lynne's free animals:

Reindeer: http://www.lynescreations.com/lynefree15.htm

Elk: http://www.lynescreations.com/lynefree16.htm

Moose: http://www.lynescreations.com/lynesfree3.htm

Big Horn Sheep: http://www.lynescreations.com/lynefree20.htm

ModernWizard

Charlie Judge said:

ModernWizard said:

will shetterly said:

ModernWizard said:

Kerya said:

ModernWizard said:

In other news, has anyone seen a rack of taxidermy antlers? Deer or moose would be best. I thought to use those from AdamThwaites' free moose prop, but they're too low-res. :(

--MW

I just noticed this, and am now agonizing over whether to buy it: http://www.daz3d.com/kelly-lodge You can see the antlers in the pics.

Yeah, I saw that and got inspired to construct my own out of models that I had or could get for free. I'm just lacking antlers, however. :D

 

--MW

Have you considered Lynne's free animals:

Reindeer: http://www.lynescreations.com/lynefree15.htm

Elk: http://www.lynescreations.com/lynefree16.htm

Moose: http://www.lynescreations.com/lynesfree3.htm

Big Horn Sheep: http://www.lynescreations.com/lynefree20.htm

Hi Charlie -- yes, I did try those, and the textures just weren't sufficient for the requisite front-on view.

I did, however, find this white-tailed deer by Wind Trees that I'm going to work with:

http://www.turbosquid.com/3d-models/real-time-deer-3d-model/240485

 

--MW

Kerya

http://www.123dapp.com/Search/Antler/content/all

 

will shetterly

Flat top or crew cut for Kids 4? I have the Morphing Flat Top, but I can't find a K4 fit for it and my attempts to make it fit have been laughable. I keep thinking there must be something like a crew cut for K4 because it was such a common hair style. Am I googling the wrong terms?

Charlie Judge

will shetterly said:

Flat top or crew cut for Kids 4? I have the Morphing Flat Top, but I can't find a K4 fit for it and my attempts to make it fit have been laughable. I keep thinking there must be something like a crew cut for K4 because it was such a common hair style. Am I googling the wrong terms?

There is this for M4: http://www.daz3d.com/flat-top-hair. It is on sale today at a very low price but I'm not sure if you could fit it to Kids 4.

will shetterly

Charlie Judge said:

will shetterly said:

Flat top or crew cut for Kids 4? I have the Morphing Flat Top, but I can't find a K4 fit for it and my attempts to make it fit have been laughable. I keep thinking there must be something like a crew cut for K4 because it was such a common hair style. Am I googling the wrong terms?

There is this for M4: http://www.daz3d.com/flat-top-hair. It is on sale today at a very low price but I'm not sure if you could fit it to Kids 4.

Thanks—that's a possibility. I found something on sharecg that claims to adapt M4 and V4 hairs to K4, but I haven't had time to experiment with it yet: http://www.sharecg.com/v/41903/gallery/11/Poser/V4-and-M4-hair-fits-for-Kid-4

I've got Prae's free crew cut, so I'll probably use it for my experiment. But Prae's crew cut is not buzzed at the neck like a traditional crew cut, so it's not quite what I'm after, and the one you linked to it is a bit more stylized. I'm hoping for that simple cut that kids used to get because their parents could do it themselves quickly.

Charlie Judge

Well this not a flat top but but if you just want a close cropped homestyle hair this one is for K4 and might work: http://www.daz3d.com/joeyducky-hairstyle