Loading...
> >

SereneNight's Sci-fi Fun

1…7778808283…100

Comments

  • AJ2112AJ2112 Posts: 1,416

    @aj2112 - if you go to the thread Serene pointed you to, the PA made a video showing how to use the product.  

    Thanks for the tip, I'll check it out yes

  • AJ2112AJ2112 Posts: 1,416
    edited June 2018

    Wow ! fantastic job ! image is balanced well.  I've always tried to get that type of effect in Photoshop, with family pictures, I gave up, Lol !!  

    Post edited by AJ2112 on
  • Serene NightSerene Night Posts: 17,651

    The image was rendered in daz studo with the manga skin filters and eye filters and toenails and lips darkened . and taken into Topaz Labs. Topaz labs is free and offers many great free filters to enjoy playing with. =-)

  • Serene NightSerene Night Posts: 17,651
    edited June 2018

    Here's Owen wearing the my guy outfit. Pretty nice looking I must say. It dforces quickly too. Some outfits take a long time.  I think Owen's found another of Boyd's shoes.wink

    myguy.png
    1400 x 1800 - 2M
    Post edited by Serene Night on
  • FishtalesFishtales Posts: 6,119

    The last Attachment is coming up with a Page Not Found error.

  • Serene NightSerene Night Posts: 17,651

    Okay try again. It’s there now.

  • FishtalesFishtales Posts: 6,119

    It's fine now.

  • FishtalesFishtales Posts: 6,119

    It's fine now.

  • Richard HaseltineRichard Haseltine Posts: 101,014
    Serene Night said:

    I haven't worked with it sufficiently, however I like it enough to keep it.

    I like the fact that it has some wrinkles grooves, and definition and that there are rumples and creases in the shirt without using dfoce. Most dforce models are smooth and you can't get the elbow folds at all.

    The collar seems rumpled by nature and loads that way as you can see on toony sam. I haven't figured out if there is a way to get it loaded straight.

    When dforced the shirt will open up but dforced is limited to poses where there is no touching and that is hard to really do in DAZ- one wants to have poses where people touch and fold their arms. So you can get those really cool poses if you are willing to contort your character.

    You can try posing to just before the touch (or, more to the point, intersection), drape, and then finish the pose off - dForce, unlike OptiTex, doesn't clear if you adjust the pose. You could also use dForms to pull the contacta reas apart. An update of X-Away to deal with things like this would be useful, or maybe Zev0 will do something.

  • Serene NightSerene Night Posts: 17,651
    edited June 2018

    I’m getting deja vu between this pose in the  best friends pose sets released today and the gen 7 brotherly pose sets with this pose.

    I only recall it since I just rendered this  pose last page....wink

     

    E7B16E9F-CF24-4156-90FB-CBA45B448BB7.jpeg
    775 x 1316 - 283K
    E7BD8717-BE79-46B1-B758-759312A561FC.jpeg
    879 x 1426 - 188K
    Post edited by Serene Night on
  • Serene NightSerene Night Posts: 17,651

     

     

    Richard Haseltine said:
    Serene Night said:

    I like the fact that it has some wrinkles grooves, and definition and that there are rumples and creases in the shirt without using dfoce. Most dforce models are smooth and you can't get the elbow folds at all.

    The collar seems rumpled by nature and loads that way as you can see on toony sam. I haven't figured out if there is a way to get it loaded straight.

    When dforced the shirt will open up but dforced is limited to poses where there is no touching and that is hard to really do in DAZ- one wants to have poses where people touch and fold their arms. So you can get those really cool poses if you are willing to contort your character

    You can try posing to just before the touch (or, more to the point, intersection), drape, and then finish the pose off - dForce, unlike OptiTex, doesn't clear if you adjust the pose. You could also use dForms to pull the contacta reas apart. An update of X-Away to deal with things like this would be useful, or maybe Zev0 will do something.

    Thanks I’ll do that.

  • Phoenix1966Phoenix1966 Posts: 1,681
    Serene Night said:

    I’m getting deja vu between this pose in the  best friends pose sets released today and the gen 7 brotherly pose sets with this pose.

    I only recall it since I just rendered this  pose last page....wink

     

    I thought of your image when I saw the new product and wondered if you had been a tester for it. smiley

  • SummerhorseSummerhorse Posts: 684
    Serene Night said:

    I tested out the new CC shave this product and found it turned out nice. Very nice selection of blonde hairs and you can go from subtle to strong. Boyd has very little body hair, so that works well for him. The shorts are Dudetrunks from rendo. A nice amount of morphs with those. Converts well to Gen 8.

    Looks really great on him! I was actually on the fence about getting this hair until I saw this.

  • Serene NightSerene Night Posts: 17,651
    edited June 2018
    Summerhorse said:
    Serene Night said:

    I tested out the new CC shave this product and found it turned out nice. Very nice selection of blonde hairs and you can go from subtle to strong. Boyd has very little body hair, so that works well for him. The shorts are Dudetrunks from rendo. A nice amount of morphs with those. Converts well to Gen 8.

    Looks really great on him! I was actually on the fence about getting this hair until I saw this.

    Yes, I think the light subtle hair with the numerous colors is an improvement on the many manle hair products I own. Plus the hair doesn't float as much as other hairs I've owned.

     

    Phoenix1966 said:
    Serene Night said:

    I’m getting deja vu between this pose in the  best friends pose sets released today and the gen 7 brotherly pose sets with this pose.

    I only recall it since I just rendered this  pose last page....wink

     

    I thought of your image when I saw the new product and wondered if you had been a tester for it. smiley

    Sadly there aren't enough male/male friends/brother/boyfriends sets that similar ones don't stand out. I'm sure I'd have trouble recognizing Vicky repeats though and I'm sure there are a sizeable amount of those.  the leaning pose is also a bit similar, but not as close as this one. wink 

    And I like Zeddicus poses. Less one thinks I diss them.  I bought the set... I just hate that 4 are repeats.

    This pose I'm very curious about? Is he pulling off the other dudes shirt?

    Capture.JPG
    392 x 556 - 31K
    Post edited by Serene Night on
  • nonesuch00nonesuch00 Posts: 18,131
    Serene Night said:
    Summerhorse said:
    Serene Night said:

    I tested out the new CC shave this product and found it turned out nice. Very nice selection of blonde hairs and you can go from subtle to strong. Boyd has very little body hair, so that works well for him. The shorts are Dudetrunks from rendo. A nice amount of morphs with those. Converts well to Gen 8.

    Looks really great on him! I was actually on the fence about getting this hair until I saw this.

    Yes, I think the light subtle hair with the numerous colors is an improvement on the many manle hair products I own. Plus the hair doesn't float as much as other hairs I've owned.

     

    Phoenix1966 said:
    Serene Night said:

    I’m getting deja vu between this pose in the  best friends pose sets released today and the gen 7 brotherly pose sets with this pose.

    I only recall it since I just rendered this  pose last page....wink

     

    I thought of your image when I saw the new product and wondered if you had been a tester for it. smiley

    Sadly there aren't enough male/male friends/brother/boyfriends sets that similar ones don't stand out. I'm sure I'd have trouble recognizing Vicky repeats though and I'm sure there are a sizeable amount of those.  the leaning pose is also a bit similar, but not as close as this one. wink 

    And I like Zeddicus poses. Less one thinks I diss them.  I bought the set... I just hate that 4 are repeats.

    This pose I'm very curious about? Is he pulling off the other dudes shirt?

    Well it looks like a cuffing move if the guy in back had a police uniform on but maybe he's just plucking a tick or something off the guy in front or re-locating a dislocation.

    I once had a doctor trick me into letting him re-locate my dislocated thumb that was pointing backwards. My thumb was pointing back toward me armpit and he non-chalantly asked to see it and was looking at it non-chalantly with my wrist in his hand & boom, LOL laugh, he seized my arm & my thumb and put it back into place and it didn't even hurt. I guess he & other doctors had enough experience to know that it is not as easy as it should be if you tell the patient you are going to re-locate a dislocation because they'll tense their muscles and make it more difficult. I was like a lion that had a thorn pulled from his paw after that. I didn't start following the doctor around though. laugh

  • Serene NightSerene Night Posts: 17,651

    Whatever is going on the guy in front doesn't look too happy. Thats nice of that doctor to spare you the anxiety of anticipation before fixing your thumb. I admit I tend to have anticipation anxiety, and things are rarely as bad as I think they will turn out to be- so I can relate.

  • Serene NightSerene Night Posts: 17,651
    edited June 2018

    I will be finishing the car crush and daddies sets, but my next is going to be cowboys. I'm really intrigued by cowboys (not gunfighters, they are so over represented in western fiction), but well, I like difficult posing issues, and you've got the horse, those hats, and, well the horse.....  Unfortunately, the poses will likely be bareback... Because the saddles bridles and tack don't function properly... But, you'll at least get a few romantic looking cowboys. I'm glad I added the hats, because.... The broad brims add a layer of posing difficulty. Without tack though, not sure what I will do with the  main rider's hands.

    cowboy.JPG
    674 x 527 - 59K
    cowboy2.JPG
    680 x 528 - 59K
    Post edited by Serene Night on
  • Serene NightSerene Night Posts: 17,651
    edited June 2018

    Hmm. So my next car crush pose will feature the little tractor. https://www.daz3d.com/tractor-f9n   It definitely needs a new coat of paint! what farmboy in his right mind would let it get THAT rusty?

    I wanted to paint it classic John Deere colors but sadly the body and tire rims are one piece!

    Post edited by Serene Night on
  • Phoenix1966Phoenix1966 Posts: 1,681
    Serene Night said:

    I will be finishing the car crush and daddies sets, but my next is going to be cowboys. I'm really intrigued by cowboys (not gunfighters, they are so over represented in western fiction), but well, I like difficult posing issues, and you've got the horse, those hats, and, well the horse.....  Unfortunately, the poses will likely be bareback... Because the saddles bridles and tack don't function properly... But, you'll at least get a few romantic looking cowboys. I'm glad I added the hats, because.... The broad brims add a layer of posing difficulty. Without tack though, not sure what I will do with the  main rider's hands.

    These are looking great.

    For the lead rider, maybe just position his hands in the general area/pose of someone holding reins and folks can paint in reins, or whatever they do with the squirrly tack.

  • nonesuch00nonesuch00 Posts: 18,131
    Serene Night said:

    Hmm. So my next car crush pose will feature the little tractor. https://www.daz3d.com/tractor-f9n   It definitely needs a new coat of paint! what farmboy in his right mind would let it get THAT rusty?

    I wanted to paint it classic John Deere colors but sadly the body and tire rims are one piece!

    Holland or IH (International Harvester) would work too...

  • Serene NightSerene Night Posts: 17,651
    Phoenix1966 said:
    Serene Night said:

    These are looking great.

    For the lead rider, maybe just position his hands in the general area/pose of someone holding reins and folks can paint in reins, or whatever they do with the squirrly tack.

    That's a good idea. I shall do that.

     

    nonesuch00 said:
    Serene Night said:

    Hmm. So my next car crush pose will feature the little tractor. https://www.daz3d.com/tractor-f9n   It definitely needs a new coat of paint! what farmboy in his right mind would let it get THAT rusty?

    I wanted to paint it classic John Deere colors but sadly the body and tire rims are one piece!

    Holland or IH (International Harvester) would work too...

    I don't think I have that one. I'll have to look for it. Thansk for the suggestion.

  • Serene NightSerene Night Posts: 17,651
    edited June 2018

    Car Crush is moving along nicely with this farmer almost about to lose his hat. This one is called Hold on to your hat! =-) It probably could go in with the cowboy set too... But Ohwell. I shall work a bit more on the hands and fingers. The steering wheel poses a level of difficulty with reds arm.

    hat-fin.JPG
    704 x 552 - 63K
    Post edited by Serene Night on
  • Serene NightSerene Night Posts: 17,651
    edited June 2018

    Here's the final version. I'll add it to car Crush shortly! I'm going to do a test render. Hard to believe this is pose number 6. Where does the time go?

    final.JPG
    539 x 617 - 51K
    Post edited by Serene Night on
  • zombietaggerungzombietaggerung Posts: 3,726
    edited June 2018
    Serene Night said:

    If anyone owns the dForce My Guy Jeans and Shirt for Genesis 8 Male can you check if the black and white checkered plaid texture in the orginal packet loads correctly? It looks funky to me in my download.

    I just checked this, and no. it seems to load in with a very low tiling number, if that makes sense. the pattern is weirdly huge. If I crank the texture's horizontal and vertical tiling up to 10 it looks ok.

     

    checkered tex default.png
    1920 x 1080 - 402K
    checkered tex tiled times 10.png
    1920 x 1080 - 577K
    Post edited by zombietaggerung on
  • Serene NightSerene Night Posts: 17,651

    Ah strange but I see that.  Very odd but thanks for checking.

  • zombietaggerungzombietaggerung Posts: 3,726

    Yes, it's very weird. Not exactly a deal breaking thing, but it seems like this is something QA should have caught. Especially since the thumbnail and promos show it properly tiled.

  • 3Ddreamer3Ddreamer Posts: 1,300

    I think nonesuch00 was refering to the paint job - Massey Ferguson colouring would work too

  • DarwinsMishapDarwinsMishap Posts: 4,087

    Holy heck- Serene, you've been a busy bee.

    Firstly-thank you for all of the couple poses, I will definitely be using those in the future. Much, much appreciated for the normal, every day kinda posing.

    Second-Wow.  The renders in the past five pages are just awesome.  Took a while to catch up since I've been off so much with the move and everything, but well worth the effort. :) 

  • nonesuch00nonesuch00 Posts: 18,131
    3Ddreamer said:

    I think nonesuch00 was refering to the paint job - Massey Ferguson colouring would work too

    Yes, I was refering to the paint job. Massey-Ferguson and Husqvarna are also popular brands here too...

  • Serene NightSerene Night Posts: 17,651
    3Ddreamer said:

    I think nonesuch00 was refering to the paint job - Massey Ferguson colouring would work too

    Hmm, yeah I like that coloration. Would be easier than John Deere too since I can’t do big yellow tires... well I can with two renders or if I want to do a new mat zone but I’m lazy...

This discussion has been closed.