Mid-way through 2022 a new Sales Thread:Report Issues Here "There's Always Another Sale™"

15859616364100

Comments

  • 3Ddreamer3Ddreamer Posts: 1,312

    It never worked for me this time, not that I care as I have had enough of playing Daz's silly games. I never even got the first 2% I was entitled to. If they can't get these promos to work for everyone out of the gate they shouldn't bother.

    Anyway without a Great Gift Card deal I am tapped out and can't buy Assassin or anything more.

  • Hmm, The PA sale is ending already and there is almost a week left in September. 

  • Don't forget the "extended" week we might probably see ;-)

  • barbultbarbult Posts: 24,754

    Charlie Judge said:

    Hmm, The PA sale is ending already and there is almost a week left in September. 

    Gosh, you don't suppose there will be a shockingly surprising extension (or two) do you? surprise

  • SevrinSevrin Posts: 6,309

    Charlie Judge said:

    Hmm, The PA sale is ending already and there is almost a week left in September. 

    Good riddance.  Even before the G9 announcement, I'd barely spent any money since my store credit ran out a little while ago and GC discounts have been scarce.

    But yeah, of course there will be a day or few tacked on, and the Plat Club (or whatever the kids call it these days) sale will start soon.

  • From the Arianna promo page: "Steampunk Pumpkin Carriage is available in store immediately upon owning all 6."

    I'm not seeing it, if it's there.

    Also the Arianna banner (the third one) presents it as chapter 5 when it's actually 6.

  • ioonrxoon said:

    From the Arianna promo page: "Steampunk Pumpkin Carriage is available in store immediately upon owning all 6."

    I'm not seeing it, if it's there.

    Also the Arianna banner (the third one) presents it as chapter 5 when it's actually 6.

    I'm not seeing that; but near the bottom of Arianna promo page the fine print states:

     *Own or buy all 6 Items in the Fairytale Series by Sept. 30 at 23:59 MDT (UTC-6) to qualify.
    Fairytale Props and Steampunk Pumpkin Carriage will be added to qualifying accounts on Oct. 1, 2022.

  • And on the top of the page in the Unlock Exclusive Items part the fine print says:

    Own or buy all 6 Items in the Fairytale Series by Sept. 30 at 23:59 MDT (UTC-6) to qualify.
    Steampunk Pumpkin Carriage is available in store immediately upon owning all 6.
    Fairytale Props will be added to qualifying accounts on Oct. 1, 2022.

    Looks like they have two different fine printes on the same page.

  • barbultbarbult Posts: 24,754
    edited September 2022

    Charlie Judge said:

    ioonrxoon said:

    From the Arianna promo page: "Steampunk Pumpkin Carriage is available in store immediately upon owning all 6."

    I'm not seeing it, if it's there.

    Also the Arianna banner (the third one) presents it as chapter 5 when it's actually 6.

    I'm not seeing that; but near the bottom of Arianna promo page the fine print states:

     *Own or buy all 6 Items in the Fairytale Series by Sept. 30 at 23:59 MDT (UTC-6) to qualify.
    Fairytale Props and Steampunk Pumpkin Carriage will be added to qualifying accounts on Oct. 1, 2022.

    It is in literal black and white right here https://www.daz3d.com/arianna-collection-series 

    Screenshot 2022-09-24 135852.jpg
    1278 x 517 - 190K
    Post edited by barbult on
  • Thank you, I am reporting the confusing delivery.

  • barbult said:

    Charlie Judge said:

    Hmm, The PA sale is ending already and there is almost a week left in September. 

    Gosh, you don't suppose there will be a shockingly surprising extension (or two) do you? surprise

    I guess we aren't getting any extension; but I'm not really surprised. DAZ has been a bit stingy and not really doing extensions lately. Oh well, my wallet is getting a much needed rest especially since there haven't been any good gift card sales lately (Hint, hint).  

  • barbultbarbult Posts: 24,754

    Charlie Judge said:

    barbult said:

    Charlie Judge said:

    Hmm, The PA sale is ending already and there is almost a week left in September. 

    Gosh, you don't suppose there will be a shockingly surprising extension (or two) do you? surprise

    I guess we aren't getting any extension; but I'm not really surprised. DAZ has been a bit stingy and not really doing extensions lately. Oh well, my wallet is getting a much needed rest especially since there haven't been any good gift card sales lately (Hint, hint).  

    I hope we can continue to rely on the advertisements being accurate, and that when they say it is the last day it really is the last day.

  • WandWWandW Posts: 2,845

    GAH!  Missed the end of the flash sale by 2 minutes even though the sale prices are still live on the sale page and the prodict pages; not in cart, tho'...  angry

    https://www.daz3d.com/the-best-flash-deal-for-you#filtered=1

  • DAZ: Buy 2+ 'Fantastic Fall' New Releases AND 2+ Featured Artist Items¥ to get an EXTRA 12% OFF* them.

    ME: Although I would like to buy todays two releases by Mechasar, without a gift card sale AND with such high buyins I won't buy anything at all.

  • watchdog79watchdog79 Posts: 1,026

    Where do I find those 3D Print licences for PA items, please? I checked a few PA items I would like those licences for and I see none have this option available.

    Does this require detective work to find the items that have it activated in the store?

    3D licences banner.jpg
    639 x 357 - 33K
  • watchdog79 said:

    Where do I find those 3D Print licences for PA items, please? I checked a few PA items I would like those licences for and I see none have this option available.

    Does this require detective work to find the items that have it activated in the store?

    I just checked some PA products which had the license. I suspect it's up to the PA to participate. Hopefully Richard or one of the other mods may know. 

  • SevrinSevrin Posts: 6,309
    edited September 2022

    watchdog79 said:

    Where do I find those 3D Print licences for PA items, please? I checked a few PA items I would like those licences for and I see none have this option available.

    Does this require detective work to find the items that have it activated in the store?

    It's an option that's available at checkout

     

    Most likely simpler to implement than updaties for every product page.

    Post edited by Sevrin on
  • watchdog79watchdog79 Posts: 1,026

    Hmm, I guess I was simply unlucky with my sample then, because none of the items I tried have the option active. Others do.

  • SolitarySandpiperSolitarySandpiper Posts: 566
    edited September 2022

    i have no intention of buying anything to do with 3D printing a the moment but i found out today and was very pleased to hear that loads of these licenses have been automatically added (for free!) to our Daz original products.

    now i'm sure the forum regulars know this but i didn't and maybe others who only ever come here to look for and report problems don't know either.

    Post edited by SolitarySandpiper on
  • SolitarySandpiper said:

    i have no intention of buying anything to do with 3D printing a the moment but i found out today and was very pleased to hear that loads of these licenses have been automatically added (for free!) to our Daz original products.

    now i'm sure the forum regulars know this but i didn't and maybe others who only ever come here to look for and report problems don't know either.

    Actually, there's whole thread about it.

    https://www.daz3d.com/forums/discussion/581546/3d-printing-licences-what/p1

  • Today's promo shows as a white placeholder with an inaccessible page in the storefront.

  • Rod Wise DriggoRod Wise Driggo Posts: 2,225
    edited September 2022

    You can access if you click on the broken image.

    Here's the page: https://www.daz3d.com/spooky-season-savings

    But another half-baked promo to me. Get an extra 8 (!!!) % off when you buy 3 (!!!) Featured Artist Store items which go for 62% off.
    No thanks. Another days cart money saved for the upcoming DAZ+ sale.

    Post edited by Rod Wise Driggo on
  • The Orange Banner is not giving the correct percentage off the products. Doesn't stack so should be 77% off the starting price. It's only 70%.

    'nite now.

  • TaozTaoz Posts: 9,971

    Catherine3678ab said:

    The Orange Banner is not giving the correct percentage off the products. Doesn't stack so should be 77% off the starting price. It's only 70%.

    'nite now.

    Same here.

  • Catherine3678ab said:

    The Orange Banner is not giving the correct percentage off the products. Doesn't stack so should be 77% off the starting price. It's only 70%.

    'nite now.

    Can you try it again? 

  • TaozTaoz Posts: 9,971

    Cris Palomino said:

    Catherine3678ab said:

    The Orange Banner is not giving the correct percentage off the products. Doesn't stack so should be 77% off the starting price. It's only 70%.

    'nite now.

    Can you try it again? 

    Working for me now, thanks!

  • winmathwinmath Posts: 140

    I've had an orange banner for $5 interactive licenses for the past 3 days, but it has never worked for me. Does any know when the sale was active?

    Screenshot 2022-09-30 005148.png
    1063 x 613 - 72K
  • winmath said:

    I've had an orange banner for $5 interactive licenses for the past 3 days, but it has never worked for me. Does any know when the sale was active?

    If is not working for you, did it have any requirements for use and did you meet them? If so, and it still doesn't work, I would advise submitting a ticket beore the sale ends to see if customer service can assist you. 

  • maikdeckermaikdecker Posts: 2,752

    The Clearance Sale items aren't reduced to $ 4.50, not in the list and not in the shopping cart. Too lazy to try out if the further reduction when putting 8+ of them in the cart works..

  • maikdecker said:

    The Clearance Sale items aren't reduced to $ 4.50, not in the list and not in the shopping cart. Too lazy to try out if the further reduction when putting 8+ of them in the cart works..

    It does seem to work, slightly over-enthusiastically for me, with eight or more. Reported.

This discussion has been closed.