Loading...
> >

GamePrint- We are still here!

24

Comments

  • JazzyBearJazzyBear Posts: 805

    Time to break open the piggy bank! That color print is amazing.

  • TaslaqTaslaq Posts: 78

    We used several of the models uploaded by our fans to do real time testing, we are still finishing up but we are very optimistic 

  • AnotherUserNameAnotherUserName Posts: 2,727

    Yah. If the color print looks as good as your tests, I dont know that ill need to paint my own!

  • xyer0xyer0 Posts: 6,057

    It wouldn't hurt for Daz to add a GamePrint rectangle back to the Shop page.

  • JoeQuickJoeQuick Posts: 1,721
    Taslaq said:
    RawArt said:

    Are the examples you posted from your 3d colour printing, or are those hand painted?

    It’s full color 3D printed 

    Any guess as to what a print like that is going to cost?

    In terms of material, is this something that could be printed as a poseable action figure provided the joints were modeled correctly in zbrush?

  • TaslaqTaslaq Posts: 78
    JoeQuick said:
    Taslaq said:
    RawArt said:

    Are the examples you posted from your 3d colour printing, or are those hand painted?

    It’s full color 3D printed 

    Any guess as to what a print like that is going to cost?

    In terms of material, is this something that could be printed as a poseable action figure provided the joints were modeled correctly in zbrush?

    Its resin but with full color 3D printing - joints generation is something we are working on

  • TaslaqTaslaq Posts: 78
    JoeQuick said:
    Taslaq said:
    RawArt said:

    Are the examples you posted from your 3d colour printing, or are those hand painted?

    It’s full color 3D printed 

    Any guess as to what a print like that is going to cost?

    In terms of material, is this something that could be printed as a poseable action figure provided the joints were modeled correctly in zbrush?

    Prices vary based on the size of the model and the volume but a rough $60 as a start for 5inch models and prices increase based on the size and volume

  • TaslaqTaslaq Posts: 78
    xyer0 said:

    It wouldn't hurt for Daz to add a GamePrint rectangle back to the Shop page.

    I think they will do that once they think its the right time, we really trust thier work 

  • TaslaqTaslaq Posts: 78
    AnotherUserName said:

    Yah. If the color print looks as good as your tests, I dont know that ill need to paint my own!

    you wont need :) trust me 

  • JeffGJeffG Posts: 124

    Think of doing a monthly give-away or contest (co-promoted with DAZ) with the winner getting a free printout. This will keep your product in front of people. Every day there are new products here and old products get forgotten.

  • TaslaqTaslaq Posts: 78
    JeffG said:

    Think of doing a monthly give-away or contest (co-promoted with DAZ) with the winner getting a free printout. This will keep your product in front of people. Every day there are new products here and old products get forgotten.

    Thanks for the suggestion 

  • TaslaqTaslaq Posts: 78

    This is fan based models we 3D Printed in full color using GamePrint 

    Blzzard 6.JPG
    6000 x 4000 - 3M
    Blizzard.JPG
    6000 x 4000 - 3M
    Blzzard 4.JPG
    6000 x 4000 - 1M
  • dragotxdragotx Posts: 1,138
    Oh that looks fantastic!
  • nonesuch00nonesuch00 Posts: 18,316

    Wow, these new lower priced color printed models make it more affordable to buy a models or three...

  • Griffin AvidGriffin Avid Posts: 3,779

    Stop playing around.

    Will this be ready to go by Christmas?

    That's all that matters. lol

     

  • The DiigitalsThe Diigitals Posts: 380

    I would order more, but pointless seeing as the 3D priting licence we were promised fell through. If I can't resell then have no real use for it.

  • TaslaqTaslaq Posts: 78
    Griffin Avid said:

    Stop playing around.

    Will this be ready to go by Christmas?

    That's all that matters. lol

     

    Hi we are planning to launch very soon - probably the first or second week of November 

     

  • TaslaqTaslaq Posts: 78
    Karuki said:

    I would order more, but pointless seeing as the 3D priting licence we were promised fell through. If I can't resell then have no real use for it.

    I think you should reach to Daz3D team - these guys are amazing, i unserstand thier concers and restrictions on selling the content 

  • AnotherUserNameAnotherUserName Posts: 2,727

    Prices! I want prices!laugh

    Have you guys done any environments? What if I was looking to have a house 3d printed?

  • TaslaqTaslaq Posts: 78

    Some of our latest tests on full-color 3D Printing from Daz3D

    IMG_2646.jpg
    640 x 480 - 46K
    IMG_2648.jpg
    640 x 480 - 69K
    IMG_2649.jpg
    640 x 480 - 47K
    IMG_2650.jpg
    640 x 480 - 49K
  • JoeQuickJoeQuick Posts: 1,721

    keep showing us more samples. keep the thread alive.

  • PippenPippen Posts: 265

    yes

  • PaintboxPaintbox Posts: 1,633

    Interesting. I find it hard to see any prices, are they listed anywhere? I am sure it might depend on the model, but some ballpark numbers would be nice...

  • thistledownsnamethistledownsname Posts: 1,331
    Taslaq said:
    Griffin Avid said:

    Stop playing around.

    Will this be ready to go by Christmas?

    That's all that matters. lol

     

    Hi we are planning to launch very soon - probably the first or second week of November 

     

    Hmmm?

  • Sfariah DSfariah D Posts: 26,550

    Is the non painted ones cheaper or is in the same price as a painted one?

  • thistledownsnamethistledownsname Posts: 1,331

    That Christmas launch is looking unlikely.

  • XenomorphineXenomorphine Posts: 2,421
    BeeMKay said:
    Griffin Avid said:

    Yeah, Raw.....that figure right there, at that size is PERFECT.

    Please lord, let that be example be machine-colored and come in at a much lower price point.

    Can these miniatures be sold or is this only for personal use and what is the cost to print?

    No, not sold, ever. Daz does NOT allow anything that uses their 3D assets to be sold. All you get is the 2D art you make with them.

    If they did, I would open a Daz3Dprint.com site and jack all of your gallery art and offer 3D Print versions of all the Daz assets. lol, not lol.

    They (Daz) say it was was a case-by-case basis so it can't hurt to submit a ticket and get a fresh answer directly from Daz.


    Cost is probably yet to be determined, but if it's somewhat less than the full hand-painted figures, oh lord it's going to be an incredible 2019.

     

    Well, the EULA allows for sale of 3D printed figurines, if you purchase a commercial 3D-Print license from DAZ... unfortunately, those are not in the store yet. But the EULA does already cover that topic.

    From the EULA:

    5.0 Commercial 3D Print Add-On License

    For any User who has purchased one or more Commercial 3D Print Add-On Licenses via the DAZ store, the terms of this Addendum 5.0 apply to all Content that the User has purchased such a Commercial 3D Print Add-On License for.

    All Content that can be identified according to the above criteria shall hereinafter be referred to as “Print Content”. The terms of this addendum 5.0 do not apply to any other Content.

    For all Print Content the creation of three-dimensional physical representations of the Print Content or any three-dimensional art derived from the Print Content is permitted for personal as well as commercial use by the User so long as it is produced by 3D Printing. The number of such Commercial prints allowed to be made of the Content by the purchase of a Commercial 3D Print Add-On License for that Content is limited to Twenty (20).

    In order to produce more than twenty commercial 3D prints of Content User should contact Daz 3D customer service by opening a support ticket and request the ability to purchase additional Commercial 3D Print Add-On Licenses for the Content.

    Yeah, it amounts to the same as a 2D picture. You're not literally selling the models and meshes and such. You're just selling the end result you create with them.

  • JoeQuickJoeQuick Posts: 1,721
    Are you still still here?
  • TaslaqTaslaq Posts: 78
    JoeQuick said:
    Are you still still here?

    Hey guys - we are still here :)

     

    Good news we are launching the new 3D Printing plugin and finishing by end of next week, we are currently doing final testing, we will do full-color 3D Printing option and give sizes between 2"-12", I am sure you will like the new outputs 

    Please find here some fan based models that we were experimenting with 

     

     

    IMG_4528 - Copy.JPG
    4029 x 3292 - 767K
    image1.jpeg
    2016 x 1512 - 467K
    image2.jpeg
    2016 x 1512 - 434K
    2K0A0010.jpg
    662 x 883 - 77K
  • TaslaqTaslaq Posts: 78

    Here are some photos too :)

    image1 (1).jpeg
    2016 x 1512 - 497K
    image2 (1).jpeg
    2016 x 1512 - 327K
    image3.jpeg
    2016 x 1512 - 314K
    image4.jpeg
    2016 x 1512 - 355K
    image5.jpeg
    2016 x 1512 - 395K
Sign In or Register to comment.