Loading...
> >

Fit Control - (Commercial)

24567…13

Comments

  • NaviNavi Posts: 452
    edited December 1969

    Zev0 said:
    See the irregularity in flow? These also cause distorions because they are not evenly applied to the figures shape on both sides.

    Yes, I don't really understand the technical reasons, but I knew there was something strange, because some clothing released a while before Keiko 6 do not suffer from these issues (very few, or not at all), so there must be one difference in the way they're rigged, or something like that.

    Smoothing modifiers sometime help, but usually can't do much about the buttock issue, in my tests.

    I made a few more pictures in case this can help to pinpoint the issue, 1st one is Gypsy outfit (almost no deformation), 2nd one is Kamala (big bump) :

    k-kamala2.JPG
    599 x 618 - 31K
    k-Kamala.JPG
    671 x 632 - 39K
    k-gypsypant.JPG
    670 x 530 - 47K
  • Zev0Zev0 Posts: 7,089
    edited December 1969

    I'll see what can be done. Will have to test the morphs on every shape and all shape combos lol. Fun fun fun :P

  • NaviNavi Posts: 452
    edited December 1969

    Thanks for the hard work :) , I have big hopes with that product. Btw I forgot to say, but this chest/buttock issue happens with the Grow Up morphs too (I dial it between 5-20 on most of my chars - another amazing product :) ).

  • ModernWizardModernWizard Posts: 850
    edited December 1969

    Sold! Will the chest adjustment morphs be able to accommodate G2F-based characters with flat chests? What I mean is that clothing sculpted for the G2F base shape can look a little weird [flat craters in pectorals, little peak between] on flat-chested G2F characters, and I'd love to fit shirts better on such characters.

    --MW

  • Zev0Zev0 Posts: 7,089
    edited December 1969

    I am working on the chest area tonight. Will see what happens and how well it works on different clothing when the chest is flat.

  • Seliah (Childe of Fyre)Seliah (Childe of Fyre) Posts: 336
    edited December 1969

    Oh, this looks wonderful. Yes, I have SY's other product also, but I would still grab this as a companion. ESPECIALLY if it came out for Genesis 1.... that would be sold instantly on my end!

  • Design Anvil - Razor42Design Anvil - Razor42 Posts: 1,237
    edited December 1969

    Looking good Zev0! Nice work!

  • nobody1954nobody1954 Posts: 933
    edited December 1969

    Looks great. I too hope for a better flat chested look. Will be buying.

  • Ralf1958Ralf1958 Posts: 688
    edited December 1969

    So??? Any News on this?

  • Zev0Zev0 Posts: 7,089
    edited April 2015

    Still working on it:) There are lots of aspects to test:(

    Post edited by Zev0 on
  • ModernWizardModernWizard Posts: 850
    edited December 1969

    How did your tests go with flat chests?

    --MW

  • Zev0Zev0 Posts: 7,089
    edited December 1969

    Got it working for the majority of clothing. Basically I created 3 morphs to control that area to smooth the clothing when a flat chest is present on the figure shape. On the downside, some clothing are just not compatible, no matter what you try lol.

  • DoctorJellybeanDoctorJellybean Posts: 8,465
    edited April 2015

    I guess a V4 version is not possible?

    Nevermind, I just saw this:

    Zev0 said:
    Shown on v4, G1 and G2f clothing.

    I should really read the WHOLE post before posting. LOL

    Post edited by DoctorJellybean on
  • Zev0Zev0 Posts: 7,089
    edited April 2015

    Unfortunately not. I am only doing a version for Genesis1 and Genesis2Female. The male one will come later, but will have less morphs since he doesn't have breasts and major cling issues like females, which is essentially half the product. So I need to see if a male version is even viable.

    Post edited by Zev0 on
  • Zev0Zev0 Posts: 7,089
    edited April 2015

    DoctorJellybean said:
    I guess a V4 version is not possible?

    Nevermind, I just saw this:

    Zev0 said:
    Shown on v4, G1 and G2f clothing.

    I should really read the WHOLE post before posting. LOL

    No. that is V4, G1 and G2 clothing. Not V4 the figure. Technically it should work with any clothing fitted to the figure.

    Post edited by Zev0 on
  • DoctorJellybeanDoctorJellybean Posts: 8,465
    edited December 1969

    Zev0 said:
    DoctorJellybean said:
    I guess a V4 version is not possible?

    Nevermind, I just saw this:

    Zev0 said:
    Shown on v4, G1 and G2f clothing.

    I should really read the WHOLE post before posting. LOL

    No. that is V4, G1 and G2 clothing. Not V4 the figure. Technically it should work with any clothing fitted to the figure.

    Yes, I got that after I edited the original post. LOL

  • Zev0Zev0 Posts: 7,089
    edited December 1969

    Lol cool:)

  • Zev0Zev0 Posts: 7,089
    edited April 2015

    Just an update from my side. Unfortunately, end of month goal will not be met because I decided to include a G1 version of the product so both will be available at once. Product will be complete by end of month, however finding a release date is another matter. :P

    Post edited by Zev0 on
  • XenomorphineXenomorphine Posts: 2,421
    edited December 1969

    That'll probably work out better for you. New characters tend to vacuum up financial attention!

  • CybersoxCybersox Posts: 9,058
    edited December 1969

    Zev0 said:
    Just an update from my side. Unfortunately, end of month goal will not be met because I decided to include a G1 version of the product so both will be available at once. Product will be complete by end of month, however finding a release date is another matter. :P

    Just as well. I've spent more than I wanted already this month with the iCLone and Genesis blow out sales. I can wait a few weeks so that the hit for this goes on the next month's expenses.

    But tell DAZ that it had better be out in MAy, darn it!

  • Zev0Zev0 Posts: 7,089
    edited December 1969

    Will definitely be available in May:)

  • wsterdanwsterdan Posts: 2,348
    edited December 1969

    Zev0 said:
    Will definitely be available in May:)
    I know it's just barely into May, but are we looking for early May or end of May?
    I'm trying to convert some clothing to Callie from male clothing and almost everything I do ends with "this could sure use Zev0's Fit Control".
    ;-)
    -- Walt Sterdan
  • Zev0Zev0 Posts: 7,089
    edited December 1969

    Aiming for middle of May. Hopefully sooner.

  • wsterdanwsterdan Posts: 2,348
    edited December 1969

    Zev0 said:
    Aiming for middle of May. Hopefully sooner.
    Thanks, I'll keep my fingers crossed.
    -- Walt Sterdan
  • Zev0Zev0 Posts: 7,089
    edited May 2015

    Some promos:)

    Popup_4.jpg
    1300 x 693 - 394K
    Popup_3.jpg
    1300 x 693 - 541K
    Popup_2.jpg
    1300 x 693 - 366K
    Popup_1.jpg
    1300 x 693 - 425K
    Main.jpg
    1000 x 1300 - 749K
    Post edited by Zev0 on
  • Zev0Zev0 Posts: 7,089
    edited May 2015

    Last few.

    Popup_7.jpg
    1300 x 693 - 336K
    Popup_6.jpg
    1300 x 693 - 330K
    Popup_5.jpg
    1300 x 693 - 353K
    Post edited by Zev0 on
  • XenomorphineXenomorphine Posts: 2,421
    edited December 1969

    Wow, you really weren't kidding when you said there would be zero texture distortion... That makes this the must-have I was hoping it would be. This will hopefully mean that costumes with things like zips running down the centre will look as natural as designed.

  • Zev0Zev0 Posts: 7,089
    edited May 2015

    Well, on certain textures of clothing, distortion cannot be avoided really, specially if they are patterns with lines, but with the morphs you can reduce it by a fair amount:). In terms of zips, so far I can reduce distortions on the sets I have tested :cheese:

    Post edited by Zev0 on
  • ModernWizardModernWizard Posts: 850
    edited December 1969

    Wow, the promos look great! Thank you for including flat chest helpers too. I'm definitely getting this.

    --MW

  • RAMWolffRAMWolff Posts: 10,212
    edited December 1969

    For Males too or just the Females Z? Product looks really great!

Sign In or Register to comment.