Loading...
> >

34th Daz3D Bryce Render challenge ■■ Robots and Robotics ■■

12345679»

Comments

  • Electro-ElvisElectro-Elvis Posts: 883
    edited April 2019

    Here's my entry. It is called "Where's the Girl? Or the Failed Rescue"

    It is a reminiscese of the sciece fiction movie "Forbidden Planet". Though I am not sure, if my picture is understandable for someone who does not know the movie poster. There is a bit of postwork. I added the question mark.

    Robby is a quite an old model I made nearly ten years ago according to a great tutorial of Clyde236 (You can find Clyde's picture of Robby on renderosity.com, but I am not sure about the tutorial) Then I forgot Robby for quite a while, but thanks to this competition, I remembered it again.

    Where's the Girl? Or the Failed Rescue

     

    Robby_WheresTheGirls_Final.jpg
    1200 x 900 - 224K
    Post edited by Chohole on
  • adbcadbc Posts: 3,115

    mtnmen : original idea, well done.

    Electro-Elvis : great use of robby, very cool render !

  • HoroHoro Posts: 10,642

    mtnmen - with all the data collected from any visitor we have already robotic fortune telling. Very nicely done.

    Electro-Elvis - cool, yes, sometimes turning around isn't such a bad idea. Nice robot.

  • ChoholeChohole Posts: 33,604

    Does anyone need any extra time?

  • Yellow PenYellow Pen Posts: 920

    mtnmen: cool Idea and very well done.

    electro Elvis: Nice Robot, I like him.

    Chohole: when someone needs more time, so maybe I can begin working for a third entry... but, for me alone more time is not necessary.

  • HenryhorHenryhor Posts: 258

    @ Electro-Elvis: remember the poster (also saw the movie). Very well modelled.

    @ mtnmen: reminds me of the Kempelen Chess Player Turk. Not sure about his predictions but very well done.

    @ Diomede_Carrara: looks like a very competent robot. Nicely done.

  • ed3Ded3D Posts: 2,187
    edited April 2019

    Chohole  " Does anyone need any extra time? "

    _Yes,   here in a bit  _will put  up  FIINAL

    Post edited by ed3D on
  • ed3Ded3D Posts: 2,187
    edited March 2020

    Third Entry

    Title:     Big Trash Collector

     

    BIG-TRASH-CAN-1FF-_b.jpg
    1699 x 1275 - 488K
    Post edited by ed3D on
  • Electro-ElvisElectro-Elvis Posts: 883
    @adbc,Horo,Yellow Pen and Henryhor: Thank you.
  • Yellow PenYellow Pen Posts: 920

    ok, no third entry for me... what I wanted to do does not work.

    So my 2 Entries are enough.

  • Tim82Tim82 Posts: 859

    great entries, best of luck to everyone :)

  • ChoholeChohole Posts: 33,604

    OK,   SO I guess we can say   

    Challenge Closed

  • drachenlordsdrachenlords Posts: 821

    @ ed3D: As Horo said, a really cool robot.

    @ Diomede_Carrara: Very nice scene. The little bot looks good.

    @ mtnmen: Yeah! One of the first robots. Very nice idea and well done.

    @ Electro-Elvis: That's cool. Acts like a cover of an old comic. Very nice.

  • mermaid010mermaid010 Posts: 5,490

    Thanks to everyone for your nice comments.

    Ed3d- cool idea, very nicely done.

    Diomede_Carrara - wow very nice, love it

    Mtnmen - unusual idea great render

    Electro-Elvis - love your Robby render, (it took me over a year to complete this model laugh)

  • ed3Ded3D Posts: 2,187

     

    Henryhor said:

    @ ed3D: unusual three graces

    Thanks kindly_

  • ed3Ded3D Posts: 2,187
    edited April 2019

    mtnmen:   Penny Arcade Fortune Teller   _pretty good

    Diomede_Carrara:   very good

    Post edited by ed3D on
  • ApocApoc Posts: 407

    @Diomede_Carrara
    do you have a title for your second entry?
     

  • ed3Ded3D Posts: 2,187
    edited April 2019
    mtnmen said:

    @ed3d fun images both of them... Big Trash Can is interesting... rather "unsmooth" though

    Thanks very much ,,  _

    Post edited by ed3D on
  • ed3Ded3D Posts: 2,187
    edited April 2019
    adbc said:

    ed3D : very good modeling.

    Made with Blender _and trash can also_

    Horo ,Yellow Pen , drachenlords , mermaid010    _thanks very  kindly

    Post edited by ed3D on
  • ed3Ded3D Posts: 2,187
    Hansmar said:

    ed3D: Poor robot, placed at the garbage. Could do with some maintenance by some other robot, maybe?

    _the Robot is trash  pick- up person      Thanks

  • ApocApoc Posts: 407

    https://www.daz3d.com/forums/discussion/318821/34th-render-contest-voting-poll 

    Poll is up. I am sorry I couldnt partipcate in the contest this time. I got swamped with other things.

     

  • DiomedeDiomede Posts: 15,169
    Apoc said:

    @Diomede_Carrara
    do you have a title for your second entry?
     

    Sorry, folks.  Didn't circle back often enough to see this, or the offer of more time.  I definitely would have tried to update my second entry by changing my import method.  Thanks for including it anyway.

     

  • mtnmenmtnmen Posts: 444

    adbc, horo, yellowpen, henryhor, drachenlords, mermaid010, ed3d, Thanks for the comments
    ...and  henryhor thanks for the reference to the Kempelen Chess Player Turk... I had to  look it up but a great hoax story...

    @electro-elvis... Great Robbie from Forbidden Planet...
    Good luck to everyone... another fun challenge

  • HansmarHansmar Posts: 2,929
    edited April 2019

    Nice one, mtnmen, just in time!

    Very funny, Electro-Elvis

    Post edited by Hansmar on
  • Electro-ElvisElectro-Elvis Posts: 883

    Thank you all for your kind comments. Good luck to everyone.

  • DiomedeDiomede Posts: 15,169
    Diomede_Carrara said:
    Apoc said:

    @Diomede_Carrara
    do you have a title for your second entry?
     

    Sorry, folks.  Didn't circle back often enough to see this, or the offer of more time.  I definitely would have tried to update my second entry by changing my import method.  Thanks for including it anyway.

     

     

    Well, I'm sure this is not new information to the rest of you, but I have discovered that I would have just wasted everyone's time if I had asked for more time to use the Studio bridge for my silent running robot.  Here, I've tried to preserve shaders for an object made with spline models by exporting to Studio first compared to just directly importing in Bryce.  You can see that the direct Bryce import preserves at least the base colors while the Studio import is just default gray.

     

    zz01 jetsons maid in Studio import with no textures and surfaces list awful.JPG
    1755 x 989 - 229K
    zz02 jetsons maid imorted in bryce obj.JPG
    1907 x 1040 - 128K
  • mach25mach25 Posts: 256
    edited April 2019

    drachenlords, great reminds me of all scifi where future ends bad for humans,but good for robots

    nice asimo renders,a a realistic robot I seen on tv,reminds me of Marvin the robot and that a robot maybe needs to walk back all those miles to earth when the humans forgot him

    nice tinman,you didnt forget to give him a heart,because we dont want him to risk his life from being killed by wicked witches and their underlingsangel

    @Cholole, I am inspired by something scifi movie/tvshows about Robots way of thinking that I want to make a render based on,if they got away with it,I think should be allowed to get away with it?

    Post edited by mach25 on
  • ed3Ded3D Posts: 2,187
    edited April 2019

     

    adbc said:

        ed3D : very good modeling

     

    _Thanks Very Much  _

    Post edited by ed3D on
  • drachenlordsdrachenlords Posts: 821

    @ mach25: Thank you.

  • ed3Ded3D Posts: 2,187
    edited April 2019

    ///  alright  then  ///

    Post edited by ed3D on
Sign In or Register to comment.