The Amorous Armadillo Complaint Thread
This discussion has been closed.
Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2025 Daz Productions Inc. All Rights Reserved.
Comments
Now I'm waiting for some volumetric fire to render, 104 frames to go I reckon a half hour going by the other hundred odd. The can shape Mac is (appropriately) blowing hot air like a fan forced heater from under the desk can feel it on my face :)
Best of luck. [/quote
Yes hopes that went well for you :)
Now I'm waiting for some volumetric fire to render, 104 frames to go I reckon a half hour going by the other hundred odd. The can shape Mac is (appropriately) blowing hot air like a fan forced heater from under the desk can feel it on my face :)
The round Macs are supposed to be pretty fast.. no surprise on the hot air tornado, though! :blank:
The round Macs are supposed to be pretty fast.. no surprise on the hot air tornado, though! :blank:
Not the fastest on the block, think that's still a dual 8 core 2012 E5 @ 3.2, still the single 12 core new E5 @ 266 is pretty fast, 216 <> 2K frames in under an hour at moderate quality setting, fluid sim took 5 minutes to write the volumetrics cache, think the new Intel math pipeline makes a difference there
Fire is starting to look like fire and look at that baby reflect wow
The round Macs are supposed to be pretty fast.. no surprise on the hot air tornado, though! :blank:
Not the fastest on the block, think that's still a dual 8 core 2012 E5 @ 3.2, still the single 12 core new E5 @ 266 is pretty fast, 216 <> 2K frames in under an hour at moderate quality setting, fluid sim took 5 minutes to write the volumetrics cache, think the new Intel math pipeline makes a difference there
Fire is starting to look like fire and look at that baby reflect wow
Now THAT is a fireplace! :cheese: :cheese: Looking HOT!!!! :bug:
Not the fastest on the block, think that's still a dual 8 core 2012 E5 @ 3.2, still the single 12 core new E5 @ 266 is pretty fast, 216 <> 2K frames in under an hour at moderate quality setting, fluid sim took 5 minutes to write the volumetrics cache, think the new Intel math pipeline makes a difference there
Fire is starting to look like fire and look at that baby reflect wow
Now THAT is a fireplace! :cheese: :cheese: Looking HOT!!!! :bug:
Starting to feel happy with it yes :)
Ways to go yet tho
Ugh... Feels like I got no sleep at all last night. Going to be a long, miserable day
I got to the bus stop late and then after ten or fifteen minutes decided I missed the bus. As I started to head back home until time to go back for the next bus, the bus came around the corner.
Nope, no Dragon 2. Oh well. :blank:
sub dragon is free with ds. :)
lateness cascades :)
The round Macs are supposed to be pretty fast.. no surprise on the hot air tornado, though! :blank:
Not the fastest on the block, think that's still a dual 8 core 2012 E5 @ 3.2, still the single 12 core new E5 @ 266 is pretty fast, 216 <> 2K frames in under an hour at moderate quality setting, fluid sim took 5 minutes to write the volumetrics cache, think the new Intel math pipeline makes a difference there
Fire is starting to look like fire and look at that baby reflect wow
whew, could toast some s'mores on that baby :)
some candylicious pron to start your day :) or wind down from it.
ouchhh had to bite my tongue.
there's a guy at the dayjob, is one of those 'throw you under the bus' kinda guys.
i heard him do it, and i wanted to say 'was it a school bus or mass transit', but he wasn't talking directly to me.
I need to get back to Zbrush'ing so I can gain the skills required to make my little Rezca real someday.
Given what Fyre's shown of Reld 2.0 with the MilDragon3, I could probably come close but... Rezca's sort of close to that 'traditional dragon' view in that he's very self-conscious about his appearance, is quite stubborn (Even for his age!) and a bit on the vain side. Just a bit ;-P
That's about as far as he goes with that 'common view' since he's not much of a hoarder (It's there, but barely present), and so on. He is a bit short tempered though :lol:
So I don't think he'd take well to having lizard hands and feet forced on him, or his scales being messed around with. The Mil2's textures were pretty close to how his are, but then there's the case of the wings. Swidhelm's wing set improved things a lot, but not quite enough. Rezca's wings are a bit different unfortunately. D:
He's just a smidgen bigger than Reld but not by much. Not exactly magic savvy either, so if the two met I can almost see some trickery happening on Reld's part at poor Rezca's expense :lol:
Dragons aren't above a little practical joking and pranking at times in good fun and spirit, right Fyre? :)
Well, he knows some about magic and the like, but he doesn't have any actual experience in it. He can read and does so when bored and there's no room/time for running and flying, so he knows about these things but that's about it. Knows what it is and such, but not much more.
There's some kind of miserable sore-throat-runny-nose thing going down here, everyone has it and alllast night I was "kaff kaff kaff", so I guess I have it too. :down:
I hope you can get sleep tonight!
Nope, no Dragon 2. Oh well. :blank:
sub dragon is free with ds. :)
Really? I'll search for it when I get home...!
In response to Rez... Fairy/pixie dragons thrive off pranks. I should make some fairy dragons when I get a chance. As for Reld, he has a sense of humor and has pulled pranks off on Sam but it's all in good nature
My brain hurts. :blank: :blank:
I'm learning how to use microcontrollers to run DC and AC motors, sensing their positioning and speed so as to accurately stop, start, and move them. And no, it's nowhere near as simple as it sounds! :ahhh:
Will probably spend all day today in study and research.. I'm too old to be learning new things! Well, more than one new thing a WEEK... :red: :red:
I'm having worse luck with the can vending machine. Last week it stole a quarter from me when I put in a dollar bill . Today, I put in exact change but they were out of canned tea, so I went to get my money back so I could try the other machine on the solid waste side of the building. That one charges a dollar and has green tea but it's better than crashing on my desk. Except the can machine only gave me two dimes out of 65 cents. >_<</p>
Luckily I found a wrinkly old dollar bill buried in my purse and was able to get my tea but man is that irritating
Where is this thing from?
Dana
Time to start bringing in stuff from home. Get a little cooler. You could afford one easily with the money you keep throwing away in that machine! Don't give them the satisfaction!
Dana
Where is this thing from?
Dana
RDNA. It stats that it has both dynamic wings (ie, poser dynamic) and confirming wings. Gorgeous model but I will need to find the conforming wings since I use Daz before I buy
Time to start bringing in stuff from home. Get a little cooler. You could afford one easily with the money you keep throwing away in that machine! Don't give them the satisfaction!
Dana
Actually, I don't use that machine unless I'm borderline unconscious from insomnia. I think that the fourth or fifth time since February
i really want a milkshake for lunch.
RDNA. It stats that it has both dynamic wings (ie, poser dynamic) and confirming wings. Gorgeous model but I will need to find the conforming wings since I use Daz before I buy
OK, from what I can see in the ReadMe file, try looking in the Libraries\Pose\AK OceanQueen\01 - OceanQueen Utils\ folder for loading the wings and tailfin. Then in Libraries\Pose\AK OceanQueen\02 - OceanQueen MATs\ for the materials.
Dana
ETA: materials are Poser Only according to the ReadMe.
Where is this thing from?
Dana
Uhm, which thing, the Ocean Queen dragon? She's from RDNA.
Uhm, which thing, the Ocean Queen dragon? She's from RDNA.
Yes, see above for my findings. :-)
Dana
RDNA. It stats that it has both dynamic wings (ie, poser dynamic) and confirming wings. Gorgeous model but I will need to find the conforming wings since I use Daz before I buy
OK, from what I can see in the ReadMe file, try looking in the Libraries\Pose\AK OceanQueen\01 - OceanQueen Utils\ folder for loading the wings and tailfin. Then in Libraries\Pose\AK OceanQueen\02 - OceanQueen MATs\ for the materials.
Dana
ETA: materials are Poser Only according to the ReadMe.
I'll give it a shot tonight - for me it's a nice, not a deal-breaker.
Just happy to learn the control key trick!
RDNA. It stats that it has both dynamic wings (ie, poser dynamic) and confirming wings. Gorgeous model but I will need to find the conforming wings since I use Daz before I buy
OK, from what I can see in the ReadMe file, try looking in the Libraries\Pose\AK OceanQueen\01 - OceanQueen Utils\ folder for loading the wings and tailfin. Then in Libraries\Pose\AK OceanQueen\02 - OceanQueen MATs\ for the materials.
Dana
ETA: materials are Poser Only according to the ReadMe.
Ooh, there's hope after all. I have pretty shaders I can use if the mats won't work
Sausage dog and buffalo wing dogs for lunch here.. with tons of relish! NOM! :)