Loading...
> >

Star Trek Builders Unite 6: The Undiscovered Thread

1…6791112…50

Comments

  • rschulterschulte Posts: 489
    edited December 1969

    Patience55 said:
    rschulte said:
    rschulte said:
    The Voyage Continues....

    Per a request by Bluto, we have created a set of the iconic Captain's wraparound uniforms using Uzilite's The New Adventures for both M4 and V4.....

    He has also requested a set of wraparounds for each of the divisions.....

    I'll be posting these soon in Sharecg.com.....

    Russ

    Posted.....

    Star Trek 14a for Uzilite's The Next Generation (Captains wrap around)
    http://www.sharecg.com/v/77586/browse/11/Poser/Star-Trek-14a-for-Uzilites-New-Adventures

    Posted ... Star Trek Online has moved to Post 4 because we were running out of space lol ...

    Not that anybody is interested but I'm pleased to have finally created a shirt with collar that works with many of the more extreme morphs, trade off being it would need some tlc texturing and/or little morph adjustments for drastically normal figures such as V6.

    Your uniform is looking really good!!! in regards to the Star Fleet Online running out of space, don't worry about it, I'm pretty much ran out of ideas of doing any more uniforms...I might finish up one or two more, but that's about it.

  • patience55patience55 Posts: 7,006
    edited December 1969

    rschulte said:
    Patience55 said:
    rschulte said:
    rschulte said:
    The Voyage Continues....

    Per a request by Bluto, we have created a set of the iconic Captain's wraparound uniforms using Uzilite's The New Adventures for both M4 and V4.....

    He has also requested a set of wraparounds for each of the divisions.....

    I'll be posting these soon in Sharecg.com.....

    Russ

    Posted.....

    Star Trek 14a for Uzilite's The Next Generation (Captains wrap around)
    http://www.sharecg.com/v/77586/browse/11/Poser/Star-Trek-14a-for-Uzilites-New-Adventures

    Posted ... Star Trek Online has moved to Post 4 because we were running out of space lol ...

    Not that anybody is interested but I'm pleased to have finally created a shirt with collar that works with many of the more extreme morphs, trade off being it would need some tlc texturing and/or little morph adjustments for drastically normal figures such as V6.

    Your uniform is looking really good!!! in regards to the Star Fleet Online running out of space, don't worry about it, I'm pretty much ran out of ideas of doing any more uniforms...I might finish up one or two more, but that's about it.

    Ah but once the texturing bug has struck you know ;-) Lots of room now for more entries :-)
    I was expecting this to happen as all the past list posts were very long hence the couple of extra posts were tucked in there too.

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    bluto said:
    mdbruffy said:
    Here's what I've got so far except for story-specific pieces I might throw in as a bonus.

    madd .
    i'm really digging this as a romulan base , it could even work for a klingon station with a change of materials and graphics
    well done , cant wait to try it out

    bluto

    Thank you! I started on the office I needed to build and had to add 3 more pieces:

    Militant_Base_Update_7.jpg
    1908 x 1536 - 160K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Update 8- with the floor and ceiling grid now in place:

    Militant_Base_Update_8.jpg
    1897 x 1137 - 186K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Working on the Base Commander's desk. Top 2 pics are screen shots from Sketch-up. The bottom 2 are renders from Poser 9. Lots of buttons still to be done, plus another side of the desk yet.

    Militant_Commanders_Desk-_WIP.jpg
    1890 x 1285 - 175K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    mdbruffy said:
    Working on the Base Commander's desk. Top 2 pics are screen shots from Sketch-up. The bottom 2 are renders from Poser 9. Lots of buttons still to be done, plus another side of the desk yet.

    The desk is done:

    Base_Commanders_desk-_Final.jpg
    961 x 1464 - 141K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    I know it looks like I've commandeered the thread. That was not my intention. Just thought your guys would be interested.

  • bwaomegabwaomega Posts: 220
    edited December 1969

    We are. At least when the notifications don't fail.

  • GRFK DSGN UnlimitedGRFK DSGN Unlimited Posts: 1,100
    edited December 1969

    Looks good to me.

  • Robert FreiseRobert Freise Posts: 4,484
    edited December 1969

    I really like that desk

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Thanks, guys. I think the desk is the last piece I need to make- IF I can find the right furniture. They used a kind of molded plastic chairs that I haven't been able to find. Any ideas?

  • stlegendsstlegends Posts: 18
    edited December 1969

    mdbruffy said:
    Thanks, guys. I think the desk is the last piece I need to make- IF I can find the right furniture. They used a kind of molded plastic chairs that I haven't been able to find. Any ideas?

    I can't think of any 3D source, but as far as information on the actual furniture used in the series, you might want to check out Catherine Bujold's: Sorellarium13 website. She's an interior designer (I think) that uses the style seen in Space: 1999 in her own interior-design work. She documents her search for original furniture and her remodeling of her own house to look like Moonbase Alpha at:

    http://sorellarium13.blogspot.com/

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Could not find anything I was happy with. So I resorted to attempting them myself. Not totally happy with the result, but they'll have to do. It was either the conversation setting or the conference table and I wanted room to move the characters around. Now for the couches and tables.

    Chair_test.jpg
    1000 x 454 - 88K
  • rschulterschulte Posts: 489
    edited December 1969

    mdbruffy said:
    Could not find anything I was happy with. So I resorted to attempting them myself. Not totally happy with the result, but they'll have to do. It was either the conversation setting or the conference table and I wanted room to move the characters around. Now for the couches and tables.

    It looks good!

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    rschulte said:
    mdbruffy said:
    Could not find anything I was happy with. So I resorted to attempting them myself. Not totally happy with the result, but they'll have to do. It was either the conversation setting or the conference table and I wanted room to move the characters around. Now for the couches and tables.

    It looks good!

    Thank you. :-)

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Well, here's what I ended up with. I just need to build a detention cell and - for my needs- the base will be done.

    Militant_Base_Update_12.jpg
    971 x 1132 - 161K
  • Robert FreiseRobert Freise Posts: 4,484
    edited December 1969

    Looks like a nice set

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Robert Freise said:
    Looks like a nice set


    Thank you.

  • rdudarduda Posts: 579
    edited September 2014

    Looking good mdbruffy!!


    Here is a sneak peek at the M4 Klingon top. Its still in the works and now a conforming figure top. The pants and boots are Valiant for M4. Special thanks to Vanishing Point for making my props a conforming figure... they are currently adding morphs.

    01_copy.jpg
    669 x 803 - 181K
    Post edited by rduda on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Rduda said:
    Looking good mdbruffy!!


    Here is a sneak peek at the M4 Klingon top. Its still in the works and now a conforming figure top. The pants and boots are Valiant for M4. Special thanks to Vanishing Point for making my props a conforming figure... they are currently adding morphs.

    Thank you. Rduda!!

  • rschulterschulte Posts: 489
    edited September 2014

    Working on the uniform for the crew of the USS Kelvin (M4 Bodysuit)... circa 2230s. shown at the beginning of Star Trek JJAbrams first movie....Still got to do the V4 version.

    From Star Trek Wikipedia ...
    "Starfleet uniforms of the 2230s were designed as tight fitting body suits with black piping running across the front of the yoke and onto the upper sleeves. A Starfleet insignia, or assignment patch, was worn on the upper left breast pocket. There were at least three division colors: blue for the command division, including tactical, a goldish green, presumably engineering, and a pearl grey, which is presumably non-medical sciences and/or security. The medical staff wore white. (Star Trek)

    The duty uniform consisted of a tight fitting shirt with black piping running across the yoke and down the sleeve until the elbow. These shirts were divided into the three division colors, and came with appropriately colored pants. The pants themselves had two pockets on the front and were worn with a gold belt and buckle that a communicator could be attached to. Rank was displayed on the sleeve cuffs. "

    Comments welcomed, please let me know if this uniform is of interest and I can post when I'm finished.

    uss_kelvin_uniforms_by_jonizaak-d5mwkzf.png
    1150 x 1187 - 267K
    trekxihd0155.jpg
    1920 x 808 - 316K
    STO19b_Kelvin_uniform.png
    913 x 898 - 158K
    Post edited by rschulte on
  • NV OracleNV Oracle Posts: 139
    edited December 1969

    rschulte said:
    Working on the uniform for the crew of the USS Kelvin (M4 Bodysuit)... circa 2230s. shown at the beginning of Star Trek JJAbrams first movie....Still got to do the V4 version.

    From Star Trek Wikipedia ...
    "Starfleet uniforms of the 2230s were designed as tight fitting body suits with black piping running across the front of the yoke and onto the upper sleeves. A Starfleet insignia, or assignment patch, was worn on the upper left breast pocket. There were at least three division colors: blue for the command division, including tactical, a goldish green, presumably engineering, and a pearl grey, which is presumably non-medical sciences and/or security. The medical staff wore white. (Star Trek)

    The duty uniform consisted of a tight fitting shirt with black piping running across the yoke and down the sleeve until the elbow. These shirts were divided into the three division colors, and came with appropriately colored pants. The pants themselves had two pockets on the front and were worn with a gold belt and buckle that a communicator could be attached to. Rank was displayed on the sleeve cuffs. "

    Comments welcomed, please let me know if this uniform is of interest and I can post when I'm finished.

    Yes, please. Also, I was wondering, if you were going to make the wrap around Captain's tunic for V4 as well. I'd say yes, please to that one as well.

  • rschulterschulte Posts: 489
    edited September 2014

    NV Oracle said:
    rschulte said:
    Working on the uniform for the crew of the USS Kelvin (M4 Bodysuit)... circa 2230s. shown at the beginning of Star Trek JJAbrams first movie....Still got to do the V4 version.

    From Star Trek Wikipedia ...
    "Starfleet uniforms of the 2230s were designed as tight fitting body suits with black piping running across the front of the yoke and onto the upper sleeves. A Starfleet insignia, or assignment patch, was worn on the upper left breast pocket. There were at least three division colors: blue for the command division, including tactical, a goldish green, presumably engineering, and a pearl grey, which is presumably non-medical sciences and/or security. The medical staff wore white. (Star Trek)

    The duty uniform consisted of a tight fitting shirt with black piping running across the yoke and down the sleeve until the elbow. These shirts were divided into the three division colors, and came with appropriately colored pants. The pants themselves had two pockets on the front and were worn with a gold belt and buckle that a communicator could be attached to. Rank was displayed on the sleeve cuffs. "

    Comments welcomed, please let me know if this uniform is of interest and I can post when I'm finished.

    Yes, please. Also, I was wondering, if you were going to make the wrap around Captain's tunic for V4 as well. I'd say yes, please to that one as well.

    Thank you! Even though I didn't include any images or V4, the zip for the M4 Captain's Tunic also includes the V4 version. As the zip was so small, I decided to combined both. Sorry if I wasn't clear on this.

    Looks like I didn't upload the correct zip (ie with the V4 files in it)!!!..... Updated zip and re-posted. Sorry for the inconvenience.

    http://www.sharecg.com/v/77586/gallery/11/Poser/Star-Trek-14a-for-Uzilites-New-Adventures

    Post edited by rschulte on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Okay, it's done and posted:

    http://mdbruffy.deviantart.com/art/Lunar-Base-1999-484947591

    Lunar_Base-_1999.jpg
    1924 x 1808 - 293K
  • jaguarry3jaguarry3 Posts: 230
    edited December 1969

    Just Uploaded USS T'Pol over at deviant art
    http://jaguarry3.deviantart.com/art/1000th-Deviation-Free-Model-USS-T-Pol-484851512
    It is set up for Poser as that is what I use but if any of you clever people know how to set her up for Daz . I'd be glad to incorporate it and give you the credit :-)

    1000th.jpg
    1093 x 729 - 96K
  • patience55patience55 Posts: 7,006
    edited December 1969

    rschulte said:
    Working on the uniform for the crew of the USS Kelvin (M4 Bodysuit)... circa 2230s. shown at the beginning of Star Trek JJAbrams first movie....Still got to do the V4 version.

    From Star Trek Wikipedia ...
    "Starfleet uniforms of the 2230s were designed as tight fitting body suits with black piping running across the front of the yoke and onto the upper sleeves. A Starfleet insignia, or assignment patch, was worn on the upper left breast pocket. There were at least three division colors: blue for the command division, including tactical, a goldish green, presumably engineering, and a pearl grey, which is presumably non-medical sciences and/or security. The medical staff wore white. (Star Trek)

    The duty uniform consisted of a tight fitting shirt with black piping running across the yoke and down the sleeve until the elbow. These shirts were divided into the three division colors, and came with appropriately colored pants. The pants themselves had two pockets on the front and were worn with a gold belt and buckle that a communicator could be attached to. Rank was displayed on the sleeve cuffs. "

    Comments welcomed, please let me know if this uniform is of interest and I can post when I'm finished.

    Sure and thank you.

    ..................

    link update noted.
    new ship added {atm new ships are being added at the bottom of the list under "More Ships". This is to avoid missing new additions in the rather long list ;-)
    new set added ... atm at the top of that list.

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Patience55 said:
    rschulte said:
    Working on the uniform for the crew of the USS Kelvin (M4 Bodysuit)... circa 2230s. shown at the beginning of Star Trek JJAbrams first movie....Still got to do the V4 version.

    From Star Trek Wikipedia ...
    "Starfleet uniforms of the 2230s were designed as tight fitting body suits with black piping running across the front of the yoke and onto the upper sleeves. A Starfleet insignia, or assignment patch, was worn on the upper left breast pocket. There were at least three division colors: blue for the command division, including tactical, a goldish green, presumably engineering, and a pearl grey, which is presumably non-medical sciences and/or security. The medical staff wore white. (Star Trek)

    The duty uniform consisted of a tight fitting shirt with black piping running across the yoke and down the sleeve until the elbow. These shirts were divided into the three division colors, and came with appropriately colored pants. The pants themselves had two pockets on the front and were worn with a gold belt and buckle that a communicator could be attached to. Rank was displayed on the sleeve cuffs. "

    Comments welcomed, please let me know if this uniform is of interest and I can post when I'm finished.

    Sure and thank you.

    ..................

    link update noted.
    new ship added {atm new ships are being added at the bottom of the list under "More Ships". This is to avoid missing new additions in the rather long list ;-)
    new set added ... atm at the top of that list.

    Thank you. Hope everyone gives it a try.

  • rschulterschulte Posts: 489
    edited December 1969

    mdbruffy said:
    Okay, it's done and posted:

    http://mdbruffy.deviantart.com/art/Lunar-Base-1999-484947591

    Great! The new Section 31 playhouse is now open.

  • rschulterschulte Posts: 489
    edited September 2014

    jaguarry3 said:
    Just Uploaded USS T'Pol over at deviant art
    http://jaguarry3.deviantart.com/art/1000th-Deviation-Free-Model-USS-T-Pol-484851512
    It is set up for Poser as that is what I use but if any of you clever people know how to set her up for Daz . I'd be glad to incorporate it and give you the credit :-)

    Thank you! She's a pretty ship and a great addition to the fleet.

    Post edited by rschulte on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    rschulte said:
    mdbruffy said:
    Okay, it's done and posted:

    http://mdbruffy.deviantart.com/art/Lunar-Base-1999-484947591

    Great! The new Section 31 playhouse is now open.

    O...kay. :-)

This discussion has been closed.