Loading...
> >

3D Printing Plugin for Daz Studio - GamePrint [Commercial]

1…89111314…33

Comments

  • Phoenix1966Phoenix1966 Posts: 1,712
    GamePrint said:
    Phoenix1966 said:

    Looking forward to the collectible size prints.

    We released the 7 inch collectible option today on the site and soon we will be releasing other sizes.

    Good to hear. I'm waiting patiently for the 12" option.

  • CypherFOXCypherFOX Posts: 3,401

    Greetings,

    About how long does the process take from submission to final product delivery?

    In other words, if I submitted a design mid-November, would it get here by...say...mid-December?

    --  Morgan

     

  • agent unawaresagent unawares Posts: 3,513
    GamePrint said:

    [Update: Single Color and Primed now available!]

     

    After hearing from the community we decided to launch a new update on the site that will also be reflected on the plugin as well but you can now order single and primed prints for an introductory price of $99

    You can use our plugin normally and change your selection to single color or primed once you are on the site, we do support black, silver, gold and bronze colors.

    We also enhanced the speed of submission so now you can submit the file and it will process on the site and still you can continue with the checkout process without waiting.

    The introductory price will be available for limited time only and we are also giving free shipping in celebration of our launch, if you have a plan to order one then it is a good time to order and save on the print and shipping wink 

     

    Can't wait to see your creations comes to the real world!.

     

     

    Thank you! I may actually get some for personal use at this price.

  • GamePrintGamePrint Posts: 539
    CypherFOX said:

    Greetings,

    About how long does the process take from submission to final product delivery?

    In other words, if I submitted a design mid-November, would it get here by...say...mid-December?

    --  Morgan

     

    Yes, typically it takes 3-4 weeks and sometimes less than that but if our queue is full then it might take an additional week or two.
  • GamePrintGamePrint Posts: 539
    agent unawares said:
    GamePrint said:

    [Update: Single Color and Primed now available!]

     

    After hearing from the community we decided to launch a new update on the site that will also be reflected on the plugin as well but you can now order single and primed prints for an introductory price of $99

    You can use our plugin normally and change your selection to single color or primed once you are on the site, we do support black, silver, gold and bronze colors.

    We also enhanced the speed of submission so now you can submit the file and it will process on the site and still you can continue with the checkout process without waiting.

    The introductory price will be available for limited time only and we are also giving free shipping in celebration of our launch, if you have a plan to order one then it is a good time to order and save on the print and shipping wink 

     

    Can't wait to see your creations comes to the real world!.

     

     

    Thank you! I may actually get some for personal use at this price.

    :D welcome anytime and please let me know if you need anything and I will be more than happy to assist
  • BeeMKayBeeMKay Posts: 7,019

    Just a quick question... right now, it's a single person  per print, I can't have two people printed in one figurine yet?

  • GamePrintGamePrint Posts: 539
    BeeMKay said:

    Just a quick question... right now, it's a single person  per print, I can't have two people printed in one figurine yet?

    You can but the calculation and price will increase, make sure when exporting from Daz to select all nodes that needs to be exported.

  • BeeMKayBeeMKay Posts: 7,019
    GamePrint said:
    BeeMKay said:

    Just a quick question... right now, it's a single person  per print, I can't have two people printed in one figurine yet?

    You can but the calculation and price will increase, make sure when exporting from Daz to select all nodes that needs to be exported.

    Okay, thanks for the information. Is there a rule of thumb for the price increase? Like, roughly an additional 75%  of the 250$, or more/less?

  • HoMartHoMart Posts: 480
    BeeMKay said:
    GamePrint said:
    BeeMKay said:

    Just a quick question... right now, it's a single person  per print, I can't have two people printed in one figurine yet?

    You can but the calculation and price will increase, make sure when exporting from Daz to select all nodes that needs to be exported.

    Okay, thanks for the information. Is there a rule of thumb for the price increase? Like, roughly an additional 75%  of the 250$, or more/less?

    I checked yesterday, they included a new dropdown in their order form. You are now able to select the number of characters in your submitted object. The price doubles for 2 , triples for3 and so on . . .
  • GamePrintGamePrint Posts: 539
    edited November 2017

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    Post edited by GamePrint on
  • XtraDimensionalXtraDimensional Posts: 509

     

    GamePrint said:

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    OH! ME! ME! ME!

  • GamePrintGamePrint Posts: 539
    Hanabi said:

     

    GamePrint said:

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    OH! ME! ME! ME!

    yes you are on the top of the list smiley 

  • cromironfist_9dcd5c6be1cromironfist_9dcd5c6be1 Posts: 7

    id like to beta test miniatures. What would it entail?

  • cromironfist_9dcd5c6be1cromironfist_9dcd5c6be1 Posts: 7

    i was able to 3dprint one of my characters using Genesis 2 male and the 3d print geo graft. had to edit quite a bit to get it to print right. printed at .05mm layer height with fdm 3d printer. still gotta clean him up a bit and glue him together.

    frogman 3dprinted in pieces.jpg
    2741 x 1664 - 2M
  • cromironfist_9dcd5c6be1cromironfist_9dcd5c6be1 Posts: 7

    close up of Frogman head

    close up of head.jpg
    3264 x 1836 - 1M
  • GamePrintGamePrint Posts: 539
    cromironfist_9dcd5c6be1 said:

    id like to beta test miniatures. What would it entail?

    The first print is free of charge for beta testers and 50% discount for each additional print.

     

    cromironfist_9dcd5c6be1 said:

    i was able to 3dprint one of my characters using Genesis 2 male and the 3d print geo graft. had to edit quite a bit to get it to print right. printed at .05mm layer height with fdm 3d printer. still gotta clean him up a bit and glue him together.

     

    cromironfist_9dcd5c6be1 said:

    close up of Frogman head

    FDM is not good enough to print minitures and it requires a lot of cleaning and most likely the print will fail too, the resolution we print with is 25-50 micron which is higher than what FDM can do and our technology will repair the file for 3D printing so you don't need to modify the file to make it printable.

  • HoMartHoMart Posts: 480
    GamePrint said:

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    sounds very interresting/tempting, how do I get more info?

  • cromironfist_9dcd5c6be1cromironfist_9dcd5c6be1 Posts: 7

    i figured you guys were using an sla or sls machine. i know fdm doesnt have as great of a resolusion and print quality, but if your willing to put a little work into your model after being printed its worth being able to print your own characters if you have a 3d printer. im really hoping you guys allow users to use the plugin to repair their model for home printing at some point. glad to see someone make the 3d printing process for daz characters easier.

  • cromironfist_9dcd5c6be1cromironfist_9dcd5c6be1 Posts: 7

    id be more than happy to beta test a miniture if you need.

  • GamePrintGamePrint Posts: 539
    HoMart said:
    GamePrint said:

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    sounds very interresting/tempting, how do I get more info?

    PM me with your email address and one of our team members will reach out to you with more details to get started.

  • GamePrintGamePrint Posts: 539
    cromironfist_9dcd5c6be1 said:

    i figured you guys were using an sla or sls machine. i know fdm doesnt have as great of a resolusion and print quality, but if your willing to put a little work into your model after being printed its worth being able to print your own characters if you have a 3d printer. im really hoping you guys allow users to use the plugin to repair their model for home printing at some point. glad to see someone make the 3d printing process for daz characters easier.

    It is in the making process wink

    cromironfist_9dcd5c6be1 said:

    id be more than happy to beta test a miniture if you need.

    Can you PM me with your email address?

  • HoMartHoMart Posts: 480
    GamePrint said:
    cromironfist_9dcd5c6be1 said:

    i figured you guys were using an sla or sls machine. i know fdm doesnt have as great of a resolusion and print quality, but if your willing to put a little work into your model after being printed its worth being able to print your own characters if you have a 3d printer. im really hoping you guys allow users to use the plugin to repair their model for home printing at some point. glad to see someone make the 3d printing process for daz characters easier.

    It is in the making process wink

    Great Info. yes

  • DaWaterRatDaWaterRat Posts: 2,885
    GamePrint said:

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    Gah!  you would have to do this on the busiest weekend of the month for me... (I'm very interested, but I don't have any free time before tuesday and I haven't picked up the plug-in yet.)

  • Aave NainenAave Nainen Posts: 1,108

    I'm very curious about just what can be 3d printed, perhaps the skirt from https://www.daz3d.com/mf-fairytales-for-genesis-2-female-s, ; may have to buy the plugin just so I can upload and see if can be done.

  • GamePrintGamePrint Posts: 539
    DaWaterRat said:
    GamePrint said:

    [Miniture 3D printing beta testers required]

     

    We want to start beta testing miniture 3D printing for sizes below 2 inches and we are looking for beta testers, please let us know through replying to this post or PM if interested wink

    Gah!  you would have to do this on the busiest weekend of the month for me... (I'm very interested, but I don't have any free time before tuesday and I haven't picked up the plug-in yet.)

    No worries, just PM your email address and one of our team members will contact you on Tuesday or Wednesday 

  • HoMartHoMart Posts: 480
    Aave Nainen said:

    I'm very curious about just what can be 3d printed, perhaps the skirt from https://www.daz3d.com/mf-fairytales-for-genesis-2-female-s, ; may have to buy the plugin just so I can upload and see if can be done.

    ther´s a blanc at the end of you link - mybe this works https://www.daz3d.com/mf-fairytales-for-genesis-2-female-s

  • GamePrintGamePrint Posts: 539
    Aave Nainen said:

    I'm very curious about just what can be 3d printed, perhaps the skirt from https://www.daz3d.com/mf-fairytales-for-genesis-2-female-s, ; may have to buy the plugin just so I can upload and see if can be done.

    I believe the skirt can be done wink 

  • DkgooseDkgoose Posts: 1,451

    Beta testing is tempting, and that figure size would be great for d&d figurines, off to buy the plugin if that's going to be an option :)

  • GamePrintGamePrint Posts: 539
    dkgoose said:

    Beta testing is tempting, and that figure size would be great for d&d figurines, off to buy the plugin if that's going to be an option :)

    Thanks smiley

  • DkgooseDkgoose Posts: 1,451

    Just got the plugin and the new shape shifting product :)

Sign In or Register to comment.