Loading...
> >

Star Trek Builders Unite 4 : In a Runtime Darkly!

1…2728303233…50

Comments

  • TimbalesTimbales Posts: 2,364
    edited December 1969

    RawArt's Medolian makes a pretty good ST alien. The forehead is from the D3 alien morphs, the head and ears from the M4 creature morphs.

    Medolian.jpg
    800 x 800 - 166K
  • patience55patience55 Posts: 7,006
    edited August 2013

    Seems one has to log in again when coming to this thread, weird.

    Anyhow ... I made a little tiny film ... it took about 3 hours to render the 3 parts that went together to make this clip that is less than 2 minutes long.
    No lights except the D/S default - made a neat star!

    Youtube clip

    Spinning Prop is here: DA Link

    Cargo Tube is here: DA Link

    I do not know how accurate the download counter is at DA ... I know for some it doesn't appear to be working well at all. According to what I see, so far 70 people have looked at the Cargo Tube and 2 people downloaded it.
    If this was happening at sharecg.com I'd be pulling them very soon.
    So if somebody knows how/if the counter is accurate or not, feel free to say something or send a PM. Thank you.

    ..................

    btw - the texture on this one [if you're making poser mats] was tiled 7 x 7 as I recall.

    spinner.jpg
    1000 x 1000 - 491K
    Post edited by patience55 on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    shadowhawk1, have you added my shuttle to the freebie list? Haven't seen your announcement. If you have, sorry for the question.

  • PDSmithPDSmith Posts: 712
    edited December 1969

    Roy's a bit behind on things, some things have been happening and come up where he's at and internet connections are back to AOL 2400 baud dial up speeds over there.

    Things should be back up and running by the weekend or mid next week. If he's online before that consider it a lucky moment.

    -Paul

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    PDSmith said:
    Roy's a bit behind on things, some things have been happening and come up where he's at and internet connections are back to AOL 2400 baud dial up speeds over there.

    Things should be back up and running by the weekend or mid next week. If he's online before that consider it a lucky moment.

    -Paul

    I will try this a THIRD time.

    It's okay. I didn't know he was dealing with RL issues. It can wait.

  • shadowhawk1shadowhawk1 Posts: 2,200
    edited December 1969

    PDSmith said:
    Roy's a bit behind on things, some things have been happening and come up where he's at and internet connections are back to AOL 2400 baud dial up speeds over there.

    Things should be back up and running by the weekend or mid next week. If he's online before that consider it a lucky moment.

    -Paul

    Hi All,

    For those that don't know it, I am a Civilian contractor working for the State Department in Iraq. I can't say exactly where but it is in the middle of nowhere and the only way in or out is by helicopter so quite literally the only thing around us is sand. As a result the only internet we have is local provided and it is very slow at times.

    After 9 long years over here, this train is rapidly coming into the station and I will be rotating back to the states sometime after the 1st of Oct. permanently. But in the mean time I will be heading to the house to take care of some family business and may not be on much or at all until around the end of the month. I please ask that if I am able to get online I will do what I can to update the freebies and stay active here but considering that I have not seen my family since just before Christmas of last year I will probably not be online a lot. I would ask that if you do post a freebie please drop me a PM with the link and if I am on I will try to update as I can, but if I am not on the pm's will ensure that I don't miss anyone's submission when I have to catch up on the thread when I get back in country.

    As always I appreciate any help you can give to keep things running smooth while I am gone.

    Roy

  • shadowhawk1shadowhawk1 Posts: 2,200
    edited December 1969

    All of the freebies from the last couple of days are posted Thank you Catherine and Bruffy for your submissions.

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    shadowhawk1 said:
    All of the freebies from the last couple of days are posted Thank you Catherine and Bruffy for your submissions.

    You be careful and spend time with your family. We'll be here when ytou're ready to come back.

  • NV OracleNV Oracle Posts: 139
    edited December 1969

    mdbruffy said:
    shadowhawk1 said:
    All of the freebies from the last couple of days are posted Thank you Catherine and Bruffy for your submissions.

    You be careful and spend time with your family. We'll be here when you're ready to come back.

    What Madison said.

  • shadowhawk1shadowhawk1 Posts: 2,200
    edited December 1969

    NV Oracle said:
    mdbruffy said:
    shadowhawk1 said:
    All of the freebies from the last couple of days are posted Thank you Catherine and Bruffy for your submissions.

    You be careful and spend time with your family. We'll be here when you're ready to come back.

    What Madison said.

    Thanks you two, I just found out the transition base I will be staying at until my flight doesn't have internet so starting tomorrow morning, this evening for mot of you I will be off line until around the 28th or 29th. I will try to catch up as best I can with the freebies when I get back so please don't forget to PM me with the info so I don't forget anyone's freebies.

  • patience55patience55 Posts: 7,006
    edited December 1969

    Okay, don't die of shock, I actually found the light switch in D/S [jk]

    How's this skin for a Deltan Head?

    deltan_head.jpg
    1000 x 1000 - 171K
  • TimbalesTimbales Posts: 2,364
    edited December 1969

    looks very nice

  • robkelkrobkelk Posts: 3,259
    edited August 2013

    Is there a Type-7 Shuttle out there anywhere that can be used in Daz Studio (either out of the box or with a minimum of conversion)? I seem to recall seeing images posted of renders of one some time ago, but it isn't on the list on page 1...

    Post edited by robkelk on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    robkelk said:
    Is there a Type-7 Shuttle out there anywhere that can be used in Daz Studio (either out of the box or with a minimum of conversion)? I seem to recall seeing images posted of renders of one some time ago, but it isn't on the list on page 1...

    Rduda uses one for his avatar, you might PM him and ask him where he got it.

  • SpottedKittySpottedKitty Posts: 7,232
    edited December 1969

    Isn't that the tubby one with the funky curves, chisel-pointy-edge nose, and cockpit windows apparently only at the side? I remember talk a few months ago of someone building a model, but I haven't noticed any update pics recently.

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    SpottedKitty said:
    Isn't that the tubby one with the funky curves, chisel-pointy-edge nose, and cockpit windows apparently only at the side? I remember talk a few months ago of someone building a model, but I haven't noticed any update pics recently.

    I will try this again.

    There's one at STMC, but it's in lightwave:

    http://www.trekmeshes.ch/

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    I don't currently have a lwo converter - anyone have any recommendations?

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    robkelk said:
    I don't currently have a lwo converter - anyone have any recommendations?

    PoseRay. It's free and it'll convert lightwave.:

    https://sites.google.com/site/poseray/home

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Thanks! (I think I might have a copy of PoseRay in my "to be installed" directory, but I'll grab it again.)

  • patience55patience55 Posts: 7,006
    edited August 2013

    robkelk said:
    Is there a Type-7 Shuttle out there anywhere that can be used in Daz Studio (either out of the box or with a minimum of conversion)? I seem to recall seeing images posted of renders of one some time ago, but it isn't on the list on page 1...

    That's because we may not link to the product page.

    There is one here: http://www.trekmeshes.ch/

    by Kenny Mitchell

    The popular Type-7 shuttle from ST: TNG.

    LWO

    ................

    posts crossed

    Post edited by patience55 on
  • SpottedKittySpottedKitty Posts: 7,232
    edited December 1969

    Just downloaded and installed the STMC one, seems to have converted nicely in PoseRay. Imported at the right size with the Lightwave preset, and all the textures go on well. The wrong uniform on the crewkitty, I know — maybe it's M'ress right after her time-jump and she knows she's having a really bad-hair day... :smirk:

    Shuttle-01.jpg
    1440 x 1080 - 324K
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    SpottedKitty said:
    Just downloaded and installed the STMC one, seems to have converted nicely in PoseRay. Imported at the right size with the Lightwave preset, and all the textures go on well. The wrong uniform on the crewkitty, I know — maybe it's M'ress right after her time-jump and she knows she's having a really bad-hair day... :smirk:

    For the THIRD time-

    Looks like we're filling in some of the holes on our list shuttle-wise. We needed them.

  • MattymanxMattymanx Posts: 6,949
    edited December 1969

    mdbruffy said:
    robkelk said:
    I don't currently have a lwo converter - anyone have any recommendations?

    PoseRay. It's free and it'll convert lightwave.:

    https://sites.google.com/site/poseray/home


    There is also Deep Exploration. Its not freeware but it is fully functional for 30 days and can convert a lot more than PoseRay can.

  • rschulterschulte Posts: 489
    edited August 2013

    For those looking for new alien races for Star Trek, you can try this freebie on sharecg.com of an Asari (for V4) from the game Mass Effect.


    http://www.sharecg.com/v/70555/browse/11/Poser/The-Illiate

    assura.png
    1125 x 898 - 905K
    Post edited by rschulte on
  • patience55patience55 Posts: 7,006
    edited December 1969

    Hay here's a neat chair! 'Saturn chair' ... great for those with tails :-)

    Click here - free! [.obj]

  • GRFK DSGN UnlimitedGRFK DSGN Unlimited Posts: 1,092
    edited December 1969

    rschulte said:
    For those looking for new alien races for Star Trek, you can try this freebie on sharecg.com of an Asari (for V4) from the game Mass Effect.


    http://www.sharecg.com/v/70555/browse/11/Poser/The-Illiate

    This is also this one by DarioFish:

    http://www.renderosity.com/mod/freestuff/details.php?item_id=70506

    David

  • mdbruffymdbruffy Posts: 2,345
    edited August 2013

    This question is for those of you that like using Victoria 4. How do I fix this mess with her neck? This is the standard texture maps that came with her.

    V4s_white_neck.jpg
    1263 x 873 - 155K
    Post edited by mdbruffy on
  • TimbalesTimbales Posts: 2,364
    edited December 1969

    I've never had that problem.

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    TimG said:
    I've never had that problem.

    I have it all the way across the back with V4 and half-way across with M3. I've never been able to figure it out and fix it outside of photoshop.

  • TimbalesTimbales Posts: 2,364
    edited December 1969

    mdbruffy said:
    TimG said:
    I've never had that problem.

    I have it all the way across the back with V4 and half-way across with M3. I've never been able to figure it out and fix it outside of photoshop.

    You're a Poser user, right? Could it be something in the UV map settings?

This discussion has been closed.