Loading...
> >

3D Printing Plugin for Daz Studio - GamePrint [Commercial]

1…2122242627…33

Comments

  • WahilWahil Posts: 307
    BeeMKay said:

    One more figure from my Christmas figure-purchase binge arrived, and I'm sort of confused over what I received.

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Maybe he lost 3 inches in height when he sat down? cheeky

    But I'm really impressed with the quality and details too.  In the picture of him facing left, the texture on his leg is unbelievable.

  • nonesuch00nonesuch00 Posts: 18,288

    I think they probably use the smallest bounding 6-sided volume and base it on that. 

  • BeeMKayBeeMKay Posts: 7,019
    edited January 2018
    Wahil said:
    BeeMKay said:

    One more figure from my Christmas figure-purchase binge arrived, and I'm sort of confused over what I received.

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Maybe he lost 3 inches in height when he sat down? cheeky

    But I'm really impressed with the quality and details too.  In the picture of him facing left, the texture on his leg is unbelievable.

    Yes, it's almost like he stepped out of his webcomic and came to "life". It's totally awesome.

    nonesuch00 said:

    I think they probably use the smallest bounding 6-sided volume and base it on that. 

    I don't know. The wolf I got earlier was also a 7 Inch,not in hight, but in length. But this guy doesn't get to 7 Inches anwhere.

    In any case, he's looking fantastic, so the size issue is rather an academical/interest question.

    Post edited by BeeMKay on
  • nonesuch00nonesuch00 Posts: 18,288
    edited January 2018
    BeeMKay said:
    Wahil said:
    BeeMKay said:

    One more figure from my Christmas figure-purchase binge arrived, and I'm sort of confused over what I received.

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Maybe he lost 3 inches in height when he sat down? cheeky

    But I'm really impressed with the quality and details too.  In the picture of him facing left, the texture on his leg is unbelievable.

    Yes, it's almost like he stepped out of his webcomic and came to "life". It's totally awesome.

    nonesuch00 said:

    I think they probably use the smallest bounding 6-sided volume and base it on that. 

     

    Yes, he does look like a very good 3DL render in real 3D.

    Post edited by nonesuch00 on
  • XtraDimensionalXtraDimensional Posts: 509
    GamePrint said:

    Question - Have you ever tried to paint a figure?

    What challenges did you face?

     

    Well, with this guy, the challenge is reaching inside all the little crevices to get the details, like his gold chain under his lekku. 

  • XtraDimensionalXtraDimensional Posts: 509
    BeeMKay said:

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Probably from a standing figure. They likely have a proportion set for the figure to be 7 inches from head to foot while standing. I know the winged guy I ordered was 7 inches from head to head to foot (when I thought he was going to be 7 inches from wingtip to foot). 

  • thistledownsnamethistledownsname Posts: 1,331
    edited January 2018

    For the two figures I sent in, I specified that the bases I included needs to be 3" square and 4" square respectively and everything should scale off that.  Hopefully they'll hold to that.  Though they're due in just over a week and I still haven't heard any questions from them nor seen any progress pics.

    Post edited by thistledownsname on
  • GamePrintGamePrint Posts: 539
    Wahil said:
    BeeMKay said:

    One more figure from my Christmas figure-purchase binge arrived, and I'm sort of confused over what I received.

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Maybe he lost 3 inches in height when he sat down? cheeky

    But I'm really impressed with the quality and details too.  In the picture of him facing left, the texture on his leg is unbelievable.

     

    thistledownsname said:

    For the two figures I sent in, I specified that the bases I included needs to be 3" square and 4" square respectively and everything should scale off that.  Hopefully they'll hold to that.  Though they're due in just over a week and I still haven't heard any questions from them nor seen any progress pics.

     

    thistledownsname said:

    For the two figures I sent in, I specified that the bases I included needs to be 3" square and 4" square respectively and everything should scale off that.  Hopefully they'll hold to that.  Though they're due in just over a week and I still haven't heard any questions from them nor seen any progress pics.

    Hey Thisledownsname.

    Sorry about that, I will check on your order and let you know. Our studio is in Europe, we can check with them in their morning time.

     

     

     

  • thistledownsnamethistledownsname Posts: 1,331

    Was one of the times you quoted me instead supposed to be a response to Wahil's quote?

  • GamePrintGamePrint Posts: 539
    thistledownsname said:

    Was one of the times you quoted me instead supposed to be a response to Wahil's quote?

    No, it was for you to tell you sorry about the delay in your order.

    We will find out exactly when it will be shipped tomorrow morning Europe time.

    Sorry again.

     

  • UHFUHF Posts: 515
    Hanabi said:
    GamePrint said:

    Question - Have you ever tried to paint a figure?

    What challenges did you face?

     

    Well, with this guy, the challenge is reaching inside all the little crevices to get the details, like his gold chain under his lekku. 

    Very good!  Did you air brush that?

  • BeeMKayBeeMKay Posts: 7,019
    Hanabi said:
    BeeMKay said:

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Probably from a standing figure. They likely have a proportion set for the figure to be 7 inches from head to foot while standing. I know the winged guy I ordered was 7 inches from head to head to foot (when I thought he was going to be 7 inches from wingtip to foot). 

    That figure you painted looks great, Hanabi! How long did it take you to paint him?

    As for the size, I guess your guess is as good as mine, but I have the same guy standing, and he's his full 7 inch size. I'd also understand if that was the same size (same hight of torso/head), but the two of the new guy are smaller in comparision. It doesn't take anything away from the "wow!" factor, it's just puzzling.

     

    nonesuch00 said:
    BeeMKay said:
    Wahil said:
    BeeMKay said:

    One more figure from my Christmas figure-purchase binge arrived, and I'm sort of confused over what I received.

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Maybe he lost 3 inches in height when he sat down? cheeky

    But I'm really impressed with the quality and details too.  In the picture of him facing left, the texture on his leg is unbelievable.

    Yes, it's almost like he stepped out of his webcomic and came to "life". It's totally awesome.

    nonesuch00 said:

    I think they probably use the smallest bounding 6-sided volume and base it on that. 

     

    Yes, he does look like a very good 3DL render in real 3D.

    Now that you mention it... yes, the colours indeed have a 3DL touch to them, don't they?

    I'm curious as to how the other figures of that group will turn out. One was a shackled guy sitting on a cube (which was due to be completed on 17th) and the other two guys standing next to each other, back to back (due on 19th). The three are important characters in my story, so them turning out good means a lot to me.

    I'm also thinking about ordering one more standard character towards the end of the month - making use of the January offer, I might just carve it out of the budget if I crimp a lot on other stuff! smiley 

  • GamePrintGamePrint Posts: 539
    BeeMKay said:
    Hanabi said:
    BeeMKay said:

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Probably from a standing figure. They likely have a proportion set for the figure to be 7 inches from head to foot while standing. I know the winged guy I ordered was 7 inches from head to head to foot (when I thought he was going to be 7 inches from wingtip to foot). 

    That figure you painted looks great, Hanabi! How long did it take you to paint him?

    As for the size, I guess your guess is as good as mine, but I have the same guy standing, and he's his full 7 inch size. I'd also understand if that was the same size (same hight of torso/head), but the two of the new guy are smaller in comparision. It doesn't take anything away from the "wow!" factor, it's just puzzling.

     

    nonesuch00 said:
    BeeMKay said:
    Wahil said:
    BeeMKay said:

    One more figure from my Christmas figure-purchase binge arrived, and I'm sort of confused over what I received.

    The quality is fantastic, and it looks more like a collectible than the 7 inch standard figure I ordered. Only, the figure isn't 7 inch, it's roughly four inches. Which made me curious as to, how is the 7 inches calculated?

    Maybe he lost 3 inches in height when he sat down? cheeky

    But I'm really impressed with the quality and details too.  In the picture of him facing left, the texture on his leg is unbelievable.

    Yes, it's almost like he stepped out of his webcomic and came to "life". It's totally awesome.

    nonesuch00 said:

    I think they probably use the smallest bounding 6-sided volume and base it on that. 

     

    Yes, he does look like a very good 3DL render in real 3D.

    Now that you mention it... yes, the colours indeed have a 3DL touch to them, don't they?

    I'm curious as to how the other figures of that group will turn out. One was a shackled guy sitting on a cube (which was due to be completed on 17th) and the other two guys standing next to each other, back to back (due on 19th). The three are important characters in my story, so them turning out good means a lot to me.

    I'm also thinking about ordering one more standard character towards the end of the month - making use of the January offer, I might just carve it out of the budget if I crimp a lot on other stuff! smiley 

    Hey Bee

    Sorry about the delay, we will be checking on you figure and getting back to you! Also make sure you use our Jan 018 offers!

    Great deals

     

  • XtraDimensionalXtraDimensional Posts: 509
    UHF said:
    Hanabi said:
    GamePrint said:

    Question - Have you ever tried to paint a figure?

    What challenges did you face?

     

    Well, with this guy, the challenge is reaching inside all the little crevices to get the details, like his gold chain under his lekku. 

    Very good!  Did you air brush that?

    Base coats are airbrushed, with that gentle highlight on the pants, but I've moved on to brush work. All the texture in the skin has been done via a glazing technique. Lots and lots left to go! I think I'm about 6-8 hours of work in so far, and not even done with the skin yet. I've been painting him up on-stream. You can check out the VoDs if you're interested: https://www.twitch.tv/hana_hanabi/videos/all Thursdays at 5:30pm Central and Sundays at 3pm central, although those times will be changing soon when I start my new schedule at work in Feb.
  • BeeMKayBeeMKay Posts: 7,019
    edited January 2018
    GamePrint said:
    BeeMKay said:

    Now that you mention it... yes, the colours indeed have a 3DL touch to them, don't they?

    I'm curious as to how the other figures of that group will turn out. One was a shackled guy sitting on a cube (which was due to be completed on 17th) and the other two guys standing next to each other, back to back (due on 19th). The three are important characters in my story, so them turning out good means a lot to me.

    I'm also thinking about ordering one more standard character towards the end of the month - making use of the January offer, I might just carve it out of the budget if I crimp a lot on other stuff! smiley 

    Hey Bee

    Sorry about the delay, we will be checking on you figure and getting back to you! Also make sure you use our Jan 018 offers!

    Great deals

     

     

    Oh, I don't mind waiting if the result is as gorgous as the last figure!

    By the way, how is the size calculated? This sitting guy is around 4 inches; the order size was 7 inches. I'd just like to know for reference, so I can plan things better for the figure dreams that are still in my pipeline...(and yes, if possible I will use the great deal. I still have a voucher somewhere, so... well, one can live on Ramen noodles for a month, right? wink)

     

    Post edited by BeeMKay on
  • thistledownsnamethistledownsname Posts: 1,331

    It's ok, I just got a bit confused by the extra quotes. I'm not too concerned with the arrival date - more concerned with the size being right.

  • GamePrintGamePrint Posts: 539

    Now offering 3D printed Chocolate Finishes!  

    I wish!!! It's actually our single color bronze Finish but its looks delicious!

    image

    image

     

  • thistledownsnamethistledownsname Posts: 1,331
    GamePrint said:
    Hey Thistledownsname.

    Sorry about that, I will check on your order and let you know. Our studio is in Europe, we can check with them in their morning time.

    That was two days ago.  Poke?

  • GamePrintGamePrint Posts: 539
    thistledownsname said:
    GamePrint said:
    Hey Thistledownsname.

    Sorry about that, I will check on your order and let you know. Our studio is in Europe, we can check with them in their morning time.

    That was two days ago.  Poke?

    Thanks for the Poke.

    I'm going to dm you details. 

     

  • BeeMKayBeeMKay Posts: 7,019
    edited January 2018

    The second figure arrived from my "hey, I got a bonus and they are on sale!" pre-christmas shopping binge.

    It's again, a 7inch standard figure. The actual size is a bit above 4 inch, but as I learned today, the "actual height" of the figure is the base for the end size, so a sitting 7 inch person is of course shorter than the same person standing. It's good to know that, really.

    It doesn't change that this is another fantastic figure, and the guys and gals at GamePrint deserve another big "Thank you".

    In any case, here's the new arrival - another character from my webcomic, a mage named Dan Tae who spent quite a few years in prison. I put him through a bath before setting him up for the picture. wink

    The photos were taken by mobile cam under bad light conditions, and don't do the figure justice.

    Here's a comparision, render and actual figure:

    And some more pics:

    DanTaeStatue04.jpg
    1200 x 1553 - 242K
    DanTaeStatue01.jpg
    1200 x 1553 - 248K
    20180125_211721_small.jpg
    1200 x 1600 - 211K
    20180125_211546_small.jpg
    1200 x 1600 - 174K
    20180125_211530_small.jpg
    1200 x 1600 - 184K
    20180125_211515_small.jpg
    1200 x 1600 - 175K
    20180125_211456_small.jpg
    1200 x 1600 - 184K
    Post edited by BeeMKay on
  • nonesuch00nonesuch00 Posts: 18,288
    BeeMKay said:

    The second figure arrived from my "hey, I got a bonus and they are on sale!" pre-christmas shopping binge.

    It's again, a 7inch standard figure. The actual size is a bit above 4 inch, but as I learned today, the "actual height" of the figure is the base for the end size, so a sitting 7 inch person is of course shorter than the same person standing. It's good to know that, really.

    It doesn't change that this is another fantastic figure, and the guys and gals at GamePrint deserve another big "Thank you".

    In any case, here's the new arrival - another character from my webcomic, a mage named Dan Tae who spent quite a few years in prison. I put him through a bath before setting him up for the picture. wink

    The photos were taken by mobile cam under bad light conditions, and don't do the figure justice.

    Here's a comparision, render and actual figure:

    And some more pics:

    LOL, love that cube he is sitting on. laugh

    Until I read your blurb I though he was based Reinholt Messner because how he looks.

  • BeeMKayBeeMKay Posts: 7,019
    edited January 2018

    Now that you mention it, yes the print does have a resemblance to Messner, though maybe it's more the combination of hair and beard. The character doesn't have that much hair in the render, but I guess the print got more from the thin top hair that was thickened? 

    The cube is from this very useful set: https://www.daz3d.com/dm-s-more-than-words

    Actually, you can get it even cheaper iin this bundle: https://www.daz3d.com/beaut-blocks-bundle

    Post edited by BeeMKay on
  • nonesuch00nonesuch00 Posts: 18,288
    BeeMKay said:

    Now that you mention it, yes the print does have a resemblance to Messner, though maybe it's more the combination of hair and beard. The character doesn't have that much hair in the render, but I guess the print got more from the thin top hair that was thickened? 

    The cube is from this very useful set: https://www.daz3d.com/dm-s-more-than-words

    Actually, you can get it even cheaper iin this bundle: https://www.daz3d.com/beaut-blocks-bundle

    thanks

  • The DiigitalsThe Diigitals Posts: 380

    I'd like to order a 7 in figure but just as a bust. Unfortunately the mannequin add on I want to use to create this isn't for the G3M I'd like to use. Is there a way I can submit the whole figure and you guys just chop off the arms and torso?? I really only want from the pecs up... like the classical busts...

    Also, if I order now will I get it for Valentine's Day? 

  • MattymanxMattymanx Posts: 6,949
    GamePrint said:

    POLL - If you could 3D Print a Daz Character which one would it be?

     

     

    I would honestly want to print my own girls:

     

    https://www.daz3d.com/gallery/#images/188501/

     

     

    https://www.daz3d.com/gallery/#images/364991/

     

     

    https://www.daz3d.com/gallery/#images/503876

  • GamePrintGamePrint Posts: 539
    Mattymanx said:
    GamePrint said:

    POLL - If you could 3D Print a Daz Character which one would it be?

     

     

    I would honestly want to print my own girls:

     

    https://www.daz3d.com/gallery/#images/188501/

     

     

    https://www.daz3d.com/gallery/#images/364991/

     

     

    https://www.daz3d.com/gallery/#images/503876

     

    They look very cool, great work! They would make great figures!

  • GamePrintGamePrint Posts: 539
    Karuki said:

    I'd like to order a 7 in figure but just as a bust. Unfortunately the mannequin add on I want to use to create this isn't for the G3M I'd like to use. Is there a way I can submit the whole figure and you guys just chop off the arms and torso?? I really only want from the pecs up... like the classical busts...

    Also, if I order now will I get it for Valentine's Day? 

    Hey I can check with our team and get back to you.

  • GamePrintGamePrint Posts: 539
    edited January 2018
    Karuki said:

    I'd like to order a 7 in figure but just as a bust. Unfortunately the mannequin add on I want to use to create this isn't for the G3M I'd like to use. Is there a way I can submit the whole figure and you guys just chop off the arms and torso?? I really only want from the pecs up... like the classical busts...

    Also, if I order now will I get it for Valentine's Day? 

    Hello, it usually takes 4-6 weeks. We do apologise we will not be able to make it in such a short time. As these collectibles are Bespoke and made using hand painters who carefully craft each model. 

     

    Post edited by GamePrint on
  • kam42kam42 Posts: 1

    Got my figures, did such a wonderful job. Really did more than I expected. Marvelous job.

    2K0A3084.jpg
    341 x 512 - 38K
  • GamePrintGamePrint Posts: 539
    kam42 said:

    Got my figures, did such a wonderful job. Really did more than I expected. Marvelous job.

    Thank you so much, glad you enjoyed it!

Sign In or Register to comment.