Loading...
> >

Star Trek Builders Unite 6: The Undiscovered Thread

1…1718202223…50

Comments

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    nightwolf1982 said:
    I'm surprised the people who HAVE the Wertz morphs haven't contacted him to get permission to make them available again, given their popularity.
    You're assuming we know how to contact him.
  • ChoholeChohole Posts: 33,604
    edited December 1969

    nightwolf1982 said:
    I'm surprised the people who HAVE the Wertz morphs haven't contacted him to get permission to make them available again, given their popularity.

    There was a reason why they were removed.

  • PDSmithPDSmith Posts: 712
    edited December 1969

    nightwolf1982 said:
    I'm surprised the people who HAVE the Wertz morphs haven't contacted him to get permission to make them available again, given their popularity.

    He up and left,

    Based on Legal research and talking with a few friends (I'm retired from the US_Navy JAG and made a number of contacts in the civilian sector before retiring) I've done what I can to follow up and fulfill the legal obligations and thusly made his Picard morph available in the TNG pack with permission from other artists/.

    If you are to do such a pack your self, CYA! And keep your paper work handy if and when Wertz does come back and makes requests for it's removal.

    DO NOT CONSIDER TO MAKE HIS MORPHS AVAILABLE FOR PROFIT OR CLAIM THEM AS YOUR OWN.

    He made them free, and if or when he comes back he may be in legal rights to recoup royalties.

    -PDSmith

  • shadowhawk1shadowhawk1 Posts: 2,200
    edited December 1969

    chohole said:
    nightwolf1982 said:
    I'm surprised the people who HAVE the Wertz morphs haven't contacted him to get permission to make them available again, given their popularity.

    There was a reason why they were removed.

    Not wanting to cause issues with this but I have heard that reason every time Wertz stuff is brought up but no one says what the reason is. Can you give a little more information on the reason or is this one of those things that is taboo to mention?

  • ChoholeChohole Posts: 33,604
    edited November 2014

    chohole said:
    nightwolf1982 said:
    I'm surprised the people who HAVE the Wertz morphs haven't contacted him to get permission to make them available again, given their popularity.

    There was a reason why they were removed.

    Marieah did make a few of them available in an accepted format (injection morphs), with Werts' permission. http://www.sharecg.com/v/41628/gallery/11/Poser/werts-Movie-Stars But not the ones you are looking for.

    Post edited by Chohole on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Didn't someone make some Klingon mugs here awhile back? Need one and can't find any.

  • NV OracleNV Oracle Posts: 139
    edited December 1969

    Yes, Madison, Bluto did.

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    NV Oracle said:
    Yes, Madison, Bluto did.

    Okay. There's no link in the list. I don't think he ever released them. I'll send him an e-mail.

  • NV OracleNV Oracle Posts: 139
    edited December 1969

    mdbruffy said:
    NV Oracle said:
    Yes, Madison, Bluto did.

    Okay. There's no link in the list. I don't think he ever released them. I'll send him an e-mail.


    Sorry about that, Madison. They're here. http://www.sharecg.com/v/68073/gallery/11/Poser/ridgy-headed-alien-party-supplys

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    NV Oracle said:
    mdbruffy said:
    NV Oracle said:
    Yes, Madison, Bluto did.

    Okay. There's no link in the list. I don't think he ever released them. I'll send him an e-mail.


    Sorry about that, Madison. They're here. http://www.sharecg.com/v/68073/gallery/11/Poser/ridgy-headed-alien-party-supplys

    He answered my e-mail. But thanks. :-)

  • patience55patience55 Posts: 7,006
    edited December 2014

    Klingon drinking vessels are now on the list :-)

    And here is a TOS Sash for M3 for those that wanted one. It was created in D/S4.6 and not tested in anything else. Technically it should work in D/S3+ and Poser 7+ but reality at times has nothing to do with technically.

    This is my Fanart Folder link as the content varies from time to time. Right now there are 2 sashes in it.


    links retired for now

    Post edited by patience55 on
  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Patience55 said:
    Klingon drinking vessels are now on the list :-)

    And here is a TOS Sash for M3 for those that wanted one. It was created in D/S4.6 and not tested in anything else. Technically it should work in D/S3+ and Poser 7+ but reality at times has nothing to do with technically.

    This is my Fanart Folder link as the content varies from time to time. Right now there are 2 sashes in it.


    http://patience55anotherone.deviantart.com/gallery/52125521/Fanart

    Is the other sash the NG sash you were working on or is that one still "In the shop"? :-)

  • patience55patience55 Posts: 7,006
    edited December 1969

    mdbruffy said:
    Patience55 said:
    Klingon drinking vessels are now on the list :-)

    And here is a TOS Sash for M3 for those that wanted one. It was created in D/S4.6 and not tested in anything else. Technically it should work in D/S3+ and Poser 7+ but reality at times has nothing to do with technically.

    This is my Fanart Folder link as the content varies from time to time. Right now there are 2 sashes in it.


    http://patience55anotherone.deviantart.com/gallery/52125521/Fanart

    Is the other sash the NG sash you were working on or is that one still "In the shop"? :-)

    The other sash is the same as the one at sharecg.com atm. Chain sash for D/S.

    Will likely load it in Poser tomorrow and see what happens. There was no way I could also weave a cloth through the chains, so it'll be a chain link only too.

  • LycanthropeXLycanthropeX Posts: 2,287
    edited December 1969

    shouldn't it be Klingon Drinking Wessels?

  • mdbruffymdbruffy Posts: 2,345
    edited December 1969

    Patience55 said:
    mdbruffy said:
    Patience55 said:
    Klingon drinking vessels are now on the list :-)

    And here is a TOS Sash for M3 for those that wanted one. It was created in D/S4.6 and not tested in anything else. Technically it should work in D/S3+ and Poser 7+ but reality at times has nothing to do with technically.

    This is my Fanart Folder link as the content varies from time to time. Right now there are 2 sashes in it.


    http://patience55anotherone.deviantart.com/gallery/52125521/Fanart

    Is the other sash the NG sash you were working on or is that one still "In the shop"? :-)

    The other sash is the same as the one at sharecg.com atm. Chain sash for D/S.

    Will likely load it in Poser tomorrow and see what happens. There was no way I could also weave a cloth through the chains, so it'll be a chain link only too.

    Okay.

  • patience55patience55 Posts: 7,006
    edited December 2014

    :-)

    The Chain Sashes for M3 and M4 are uploaded to my DA folder.

    All 3 legacy sashes work in PoserPro2012.

    All 3 [M3, M4, Genesis] chain sashes share the same materials so mats made for one, will work on all.

    No additional morphs and no textures provided. Everything is uvmapped.

    The reason why I left the chain sashes to have so many mat zones is so one can rearrange or hide them. Morphing this sash is not very doable. With the .cr2 there is of course the geometry which one could load and make into a prop for oneself if so desired in Poser.

    .....................

    links retired for now.

    Post edited by patience55 on
  • jaguarry3jaguarry3 Posts: 230
    edited December 1969

    Engineer Du'Ralle of the Raptor K' Trelan

    DuRalle.jpg
    1404 x 952 - 666K
  • robkelkrobkelk Posts: 3,259
    edited December 1969

    LycanthropeX said:
    shouldn't it be Klingon Drinking Wessels?

    Only of the readme is in the original Russian... 8)
  • LycanthropeXLycanthropeX Posts: 2,287
    edited December 1969

    robkelk said:
    LycanthropeX said:
    shouldn't it be Klingon Drinking Wessels?

    Only of the readme is in the original Russian... 8)

    not sure why but i was channeling Chekov when i read that post :) Klingon wessels, Romulan wessels, Nuclear wessels

  • patience55patience55 Posts: 7,006
    edited December 2014

    Somebody requested the TOS Sash for M4, so it has been uploaded to my DA Gallery as well.


    ....................

    links retired for now.

    Post edited by patience55 on
  • Paul PettyPaul Petty Posts: 48
    edited December 1969

    https://www.youtube.com/watch?v=zFjikVnvypg New from New Voyages

  • stlegendsstlegends Posts: 18
    edited December 2014

    "Dock control reports ready. Yard command signaling clear, sir."

    "Thrusters ahead, Mister Sulu. Take us out."

    Almost a year to the day, and it's finally up and running - Star Trek: Legends. The first nine pages are up, and I plan on posting at least one page every Sunday from here on out. THANK YOU to the many extremely wonderful, generous, and talented people here such as Bluto, Mdbruffy, PDSmith, Mylochka, and many other fantastic people for all their help and guidance. And if I've left anybody out of the credits, PLEASE message me, and that will be corrected immediately with my profuse apologies. Thanks again to all!

    http://www.ncc-1701-a.net/episode1

    Post edited by stlegends on
  • jaguarry3jaguarry3 Posts: 230
    edited December 1969

    stlegends said:
    "Dock control reports ready. Yard command signaling clear, sir." "Thrusters ahead, Mister Sulu. Take us out."

    Almost a year to the day, and it's finally up and running - Star Trek: Legends. The first nine pages are up, and I plan on posting at least one page every Sunday from here on out. THANK YOU to the many extremely wonderful, generous, and talented people here such as Bluto, Mdbruffy, PDSmith, Mylochka, and many other fantastic people for all their help and guidance. And if I've left anybody out of the credits, PLEASE message me, and that will be corrected immediately with my profuse apologies. Thanks again to all!

    http://www.ncc-1701-a.net/episode1

    Excellent looking forward to more

  • blutobluto Posts: 849
    edited December 1969

    stlegonds , looks great so far , best of luck in your voyages

  • patience55patience55 Posts: 7,006
    edited December 2014

    Page 6!!!! Hay guys ... we're supposed to keep this on the first page [so I can find it lol ...]

    Started a Klingon chair ... the base went well so I'm releasing it. D/S and Poser prop files.

    DA Link

    The Chair, D/S prop file only.

    New_Klingon_Chair.jpg
    1000 x 1000 - 68K
    base_for_a_Klingon_chair.jpg
    1000 x 1000 - 77K
    Post edited by patience55 on
  • nightwolf1982nightwolf1982 Posts: 1,175
    edited December 1969

    Vanishing Point just released their next item in their "Starship" Line - Starship Engineering Room 3. Pick it up on their main site or at Rendo!

    Really good match to a certain Intrepid class starship's Engineering Section

  • jaguarry3jaguarry3 Posts: 230
    edited December 1969

    Ah Yule tide approaches and what better way to celebrate than a leg of roasted wild Targ

    Targ.jpg
    1015 x 963 - 654K
  • Robert FreiseRobert Freise Posts: 4,484
    edited December 1969

    jaguarry3 said:
    Ah Yule tide approaches and what better way to celebrate than a leg of roasted wild Targ

    With some Gagh on the side and a flagon of Bloodwine

  • rdudarduda Posts: 579
    edited December 1969

    Yea! Voyager Eng now at VanishingPoint!!

    JHoagland_2634_1.jpg
    600 x 600 - 57K
  • patience55patience55 Posts: 7,006
    edited December 2014

    Sigh, growing wishlist lol ....


    .........

    okay ... the Poser prop for the chair top for the base is now uploaded too.
    I realized while making this that the picture I was working from was at an odd angle so this is really a, um, simplified Klingon bridge chair.

    http://patience55anotherone.deviantart.com/art/New-Klingon-Chair-500533505

    Happy Holidays whatever you celebrate :-)

    ........................


    New additions to the list [2nd post]: By TrekkieGal:

    Centaur Class for DAZ 4.7
    Norway Class for DAZ 4.7
    Galileo Shuttle DAZ 4.7
    Prometheus Class-Constitution

    Post edited by patience55 on
This discussion has been closed.